10.11.4+ Skylake Starter Guide

[ritzbitz00]

I am trying to install 10.11.6 on my machine. This guide doesn't include instructions for configuring clover during the install, is it the same as it was for the 10.11.3 guide?

 

[choronako]

Hello,
I'm successful installed 10.11.5 on a Dell Optiplex 7440 (Skylake core i5 i6500) by follow this guide from this topic.
I have the GPU HD530 work well thanks to Intel Inject bit, BUT, I have no Ethernet, no WiFi, no audio although all kexts and patchs I tried... not very funny.

For each kext that I tried to load manually, console said : "kext signature failure override allowing invalid signature".
I setted CsrActiveConfig to 0x03 to allow system to load unsigned kexts, after reboot, it's change nothing, impossible to load kexts.

Clover Configurator > Rt Variables > BooterConfig and CsrActiveConfig

Relevant user options for SIP are as follows:
csr-active-config 0x0 = SIP Enabled (Default)
csr-active-config 0x3 = SIP Partially Disabled (Loads unsigned kexts)
csr-active-config 0x67 = SIP Disabled completely

I also setted kext-dev-mode=1 (old way to disable SIP), it's same.
I read a lot pages and try a lot things ... please help me !

Any luck with the ethernet?

 

[BreBo]

@choronako, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.

Profiles need to contain at least your primary system to assist others with helping you.

 

[DeathsGun]

Thank you this guide really helped my by building my hackintosh