Skylake Starter Guide
Nope. I can´t, just stucks at loading. Tried everything in BIOS:
-
AHCI mode
- IOAPIC 24-119 entries Disabled
- secureboot to otheros
- VT-d disabled
-
CFG-Lock ( this I can´t find it inside my BIOS)
also, I tried access OS X installer in all modes. Stuck at 0%. Dunno what im doing wrong.
TY jrpjrp btw
for ur time!
What bios version You have? I use now 1402 but newest is 1602 (should work too).
Install:
1. Create bootable USB drive with Unibeast.app
(SMBIOS should be Mac Pro 3.1. I use first iMac17,1 but need change that later because video card don't work with that)
2. Download EFI Mounter v3.app and mount USB drive EFI partition
3. Open: EFI ->CLOVER -> config.plist (use TextEdit.app)
4. Make IOAPIC Fix (screenshot my config.plist is attached)
5. Start install (remove videocard and use Integrated graphic)
6. When install done: Mount "Mac HDD" EFI partition.
7. Replace config.plist file in CLOVER folder (Use same config.plist file what You use in USB drive)
8. Unplug USB drive (otherwise system load EFI in USB on next start)
9. Restart machine (If start, install was ok)
10. Download newest nVidia Web Driver (I use at the moment version 346.03.05f01) and install
11. Open nVidia Driver Manager on System settings and choose OS X Default Graphics Driver
12. Shut down and install Video Card
13. Restart machine (video cable still connect motherboard HDMI)
14. Open nVidia Driver Manager on System settings and choose NVIDIA Web Driver
15. Shut down and change video cable to Video card
16. Start machine
I hope remember video card install order right.
After that You must fix Sound, Bluetooth, USB...
My english is not very good, but hope You understand something what I write.