10.10.2 ga-z68xp-ud4 gtx760 boot hangs after firewire, safe boot works

[marcagio]

Hi!

I've been running this machine perfectly fine for a long time with mountain lion.

Decided to upgrade to yosemite a few weeks ago due to some stability issues with Logic Pro and Final Cut.

It's been running fine for a while but I have this strange issue now since I have installed the drivers for my ZOOM R16 Recorder/interface/controller.

BTW : I can't live without it, it's my interface to record instruments.

After having kernel panics, I tried every boot flags I could find in vain... I re-installed OS X with my Unibeast USB on top of the older installation and redid everything with Multicast, First reboot was a complete success, my R16 was detected BUT my built in audio wasn't, so I reinstalled realtek ALC889 AND the HDAEnabler Audio ID: 1...

Since then, my boot hangs right after the line where it activates FIREWIRE... I tried many boot flags but nothing seems to get around this. The only way I can boot is in safe boot. But as you know, there's a lack of functionality when I do so...

My profile is up to date with the hardware I have in there.


Here's my org.chameleon.Boot.plist

---------------------------------- START ----------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>HDEFLayoutID</key>
<string>01000000</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>HDAEnabler</key>
<string>No</string>
</dict>
</plist>
---------------------------------- END ----------------------------------------

Here's the smbios.plist :

---------------------------------- START ----------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMfamily</key>
<string>Mac Pro</string>
<key>SMproductname</key>
<string>MacPro3,1</string>
<key>SMboardproduct</key>
<string>Mac-F42C88C8</string>
<key>SMserial</key>
<string>G88281A55J4</string>
<key>SMbiosversion</key>
<string>MultiBeast.tonymacx86.com</string>
</dict>
</plist>
---------------------------------- END ----------------------------------------

 

[marcagio]

Just to add : Here is the last bunch of stuff I tried with multibeast. Didn't work.