z68

  1. Nodarkthings

    << Solved >> i7 3770 IGPU + discrete GC on Z68 mobo

    After ten days of unsuccessful trials, following all guides available and even combining them, I had surrendered last week... thinking it was perhaps impossible to activate the IGPU of an Ivy CPU on a Sandy mobo. But a few hours ago, something stroke me: during all my trials, there never was...
  2. smcpipint

    [success] - Big Sur Beta on Sandy Bridge/Z68 and Haswell/Z87

    I updated my two systems, one Sandy Bridge/Z68 and one Haswell/Z87. I largely followed the Dortania guide, with only two major exceptions: The Doratania guide on Sandy Bridge is unclear (to be nice about it) about handling the EC controller; I created an AML file that works for both my Sandy...
  3. Leoqwer

    Catalina and 9500gt

    Hello, all! after 6 years on Yosemite I decided to update, but even forgot my password on this site) And now problems begin) 1- Downloaded Catalina from app store 2- Created a usb installer with latest Clover 3- After first reboot appears window with information about error Help please...I do...
  4. cubed3d

    Boot from USB Works... Boot from HDD Doesn't Work...

    I'm experiencing issues when I try to boot directly off the HDD where it will get to FakeSMC and lock up. Literally the last line says "FakeSMC" and that's it. I have no problems booting from the USB. I'm using a GA-Z68X-UD3H-B3 motherboard with a 2600K. Here is what I installed via Multibeast...
  5. tonydale

    [Success] ASRock Z68 Extreme4 Gen3 - Intel i5 3570k - GTX 670 - 10.11.2

    Introduction When building my PC a few years ago, it had never crossed my mind that I would be using it as a hackintosh. Yet here we are, with a system that works on El Capitan 10.11.2 as if it was made for it. Components As they are far from new, I doubt most of them will still...
  6. z15tea

    No audio device on z68x-ud4-b3 ALC889 el 10.11.2

    I've got everything working other than onboard audio for my z68x-ud4-b3 board with ALC889. I am using both the DSDT and SSDT, booting with clover legacy. The UEFI firmware for this board is broken so i had to revert. I still have to boot from a USB at the moment but sound is my priority. I've...
  7. cronix

    Asrock z68, i5 2500k, gtx 770 4gb HELP

    Hey guys, so i got my hackintosh fully working. Everything, including bluetooth, speedstepping, graphics acceleration etc., but i got a weird issue, that sometimes when i boot, after the apple logo my screen will just turn off and it won't turn back on until i restart the machine. Sometimes i...
  8. cronix

    Asrock z68 extreme 3 gen 3 DSDT help

    Hey guys, i finally installed mavericks on my hackintosh, but speedstep doesn't work. I've tried everything (also ssdt) but nothing worked. So i thought to try it with a dsdt. My rig: i5 2500k 12 gb RAM, 1600 asrock z68 extreme 3 gen 3 msi gtx 560 ti Extracted dsdt is attached. Please help...
  9. shyguysworld

    z68 Upgrade!

    Hello all! A couple of months ago I built a z68 desktop to run windows 8 (don't judge me for using z68, it was budget okay?!) and I became very disapointed with Microsoft's new OS. I've had a macbook air since 2011 and I thought OSX Mavericks seemed much better than Windows 8. So my question...
  10. Vandal1

    apple intel cpu power magement kp

    Hi all this is the first time posting so srry for any errors I have tried to make and hackintosh you can see my specs after booting up with uni beast I can get to multibeast to install but then I get a kp to do with power management I have 5 re different cofigs I am pretty good with technology...
  11. Jelleko

    Asrock z68 pro3 gen3 DSDT

    Hello, I managed to install mavericks onto my computer. However, i can only boot it with safe mode. Do i need an DSDT to het everything working properly? As of this moment, Graphics are flickery, the computer will only boot in safe mode, and the audio is not working. I already tried some...
  12. galli2000

    Asus P8Z68V LX issues with EIST

    Hello, Here is my conf.: Asus P8Z68V LX + Intel Core i5 2500K + RAM Patriot PC3-12800 1600MHz 8GB (2x4GB) + nVidia GT240 512MB GDDR5 I used to have a perfectly working system on 10.8.5, no DSDT, but since Mavericks update (Unibeast method), I cannot start with EIST enabled in the BIOS...
  13. mihaivladan

    [SUCCESS] Mavericks install on i5 2500k Asrock Z68 Extreme3 Gen 3 16Gb GTX460

    Updated from Lion 10.7.5 using the 10.9 Unibeast guide. Had no problem in creating the USB drive, however i was unable to boot Mavericks from it : It would show the apple logo and grey screen for a split second then my system would reboot. Spent about 1 day trying all Boot flags...
  14. pouyavessali

    Unable to boot after successful MultiBeast Install (Gigabyte Z68X-UD3H-B3)

    Hello, I have installed Mavericks successfully with no issue. After a successful Multibeast installation I managed to boot using PCIRootUID=1 GraphicsEnabler=Yes. However my ethernet wasn't working so I had to restart. Ever since then I've been unable to get past the grey screen and keep...
  15. ghost213

    Is my hardware compatible and what version of OSX can I run?

    Hi, I've been thinking of trying to do a hackintosh, can you let me know if it's possible and where I can find any guides. I'm not sure what version of OSX I might be able to use. I've always been a Windows user but I want to try out OSX to see how it is. My sister has a really old Apple G4...
  16. fadis96

    Quick Question: Gigabyte z68 which DSDT version is best?

    Mobo:Gigabyte GA-Z68AP-D3 Z68 Socket 1155 8 Channel Audio ATX Motherboard Hi all, I bought the following mobo. it will arrive tomorrow. im doing the preps and setting up the USB Drive. getting ahead of myself. I was looking at DSDT files and i dont really know which one is for me...
  17. monkeyarms96

    ML help

    I've been having a real difficult time trying to get this system to work. GA-Z68XP-UD3 Bios F10 i5-2500k 16 gb 1600mhz ram 120 Samsung 840 ssd 650 psu TP-Link wifi I can get through the installation part just fine, then I start Mulit-Beast and once I restart that's when I run into...
  18. monkeyarms96

    ga-z68xp-ud3 multibeast help

    Components: ga-z68xp-ud3 i5 2500K 2x 8gb ram 650 w psu Samsung 840 ssd 120 gb The rest is pretty generic I can install ML no problem I get to the install screen with pcirootuid=0 Then on re-boot I try to use multibeast but halfway through the whole system freezes. I have a usb keyboard...
  19. nuttish

    GA-Z68X-UD3H-B3 UEFI Mountain Lion and BIOS issues

    Apple murdered Back to My Mac for 10.7 so I was forced to "upgrade" to ML on my desktop because I need BTMM for work. I followed the ML installation guide here...
  20. MRLOLKOPF

    Cant install ML with PCIE GPU on ASUS z68 MB

    Hello everyone, everything worked perfect with my old MB Gigabyte p55a-ud3 and Asus gtx560ti.. it was already boring being all perfect ;) So i got now a hardware update to MB Asus Maximus iv Gene-z/GEN3 (Z68) with i7-2600K and some more RAM, but same gtx560ti. Of course i installed the...
Top