x99

Hi everyone, I just wanted to roll a word about my Hackintosh experience and using the tips found on the tonymac site! First, I really appreciated the guides, and the tools. It seems universally with most folks who have built their hackintosh, that it is a learning experience; and the trip...

Hello, I have a working macOS 10.14.2 installation as long as the motherboard BIOS version is 3101 or earlier. With any newer BIOS such as 3202, the screen is stuck on "PCI configuration begin". How can I debug this and find the cause? I have compared settings between these versions, compared...

Hi! I’m currently running a Sierra install on my system with an MSI X99A SLI Plus, 5820k, 32 gb Kingston 2400 ram, and a 980 ti, but now with the new features in Mojave I decided to upgrade, however this is where my problems start. I tried going off kgp’s guide, but no matter which osxaptiofix...

Hello All, i closely followed KGP guide "how-to-extend-the-imac-pro-to-x99-successful-build-extended-guide" to upgrade from MacOs 10.11 to 10.13. Everything work like a charm ... except more than ±30Gb USB3 file transfer. There is no system error or problem while reading the (big video) file...

I'll admit I haven't tried a hackintosh in a very long time so I'm quite rusty at this, but since the Mojave beta came out I've been unable to install no matter what I do and the problem is that it reboots with like 75% into the macOS install before I can catch a glimpse of the errors being...

I'm new to this hackintosh World. I bought my hackintosh, so I didn't do anything, actually. I'm a Artist/Music producer Using Logic Pro X. It would mean the world to me if you could help me getting my Clarett to work with my rig<3 I bought the Asus ThunderboltEX 3 in hope that it would...

Hello, I currently have a working build with Sierra 10.12.6, attached the EFI folder I am using ("EFI 10.12"). I want to update to High Sierra, and I've been struggling to get it working in my current build for the past week. I´ve followed several guides from this forum as well as from other...

Hello folks, When I finally built my first hackintosh was 8 years ago with i7-920 with a great help from you guys here. Now I am trying to create another one with the below specs: - i7-5820k - x99 Sabertooth - 560ti Twin Frozr - Ripjaws DDR4 16g - Kingston V300 250gb - Seagate Barracuda 1tb -...

hi, i have a new platform and i never work with x99 or x299 before so i need help. i dont know what to set in clover, what kext i need and what i need to do far a good installation, i have a efi folder that i used before for my z170 platform (i7 6700k, asus z170i or msi z170a gaming 5, 16gb ddr4...

Hey I hope I can get some help here. I have been trying for some time to get the Nvidia web drivers to initiate on my X99 build. The drivers install fine without any problems. And Nvidia is always selected under the nvidia desktop menu and under system preferences. The problem is that I...

Hi, I wanted to create a current 2018 thread for other Hackintosh users who combine these two hardware devices and/or other similar UAD sound card configurations, and also for those Hackintosh builders who also want to do so. I wanted to share my best and stable system settings and reach out to...

Hello, guys. I am stuck with the installing of High Sierra at my rig. I have used Hack previously, I had installed Yosemite on the same rig, and it was fully functional. But, drive where it was installed cracked, and I left this idea for the future. Now, I got a one more SSD, and decided to get...

Hello everyone, this is my first attempt to build a hackingtosh for video editing in Final Cut Pro X. I've some experience with old hardware and server cpus, but never built a mac. So bear with me :D Right now I have this for the build: GTX780 (3gb Zotac), BeQuiet 580W and some harddrives. I...

So I have an extra 500gb hard drive in my system that i wanted to install OSX high sierra on to play around with every now and then. However everytime i try to install the install gets nowhere, when try to use -v i can see that it's getting stuck at [pci configuration begin]. I've tried to...

Hello There, I have just installed High Sierra (17C205) to my Hack successfully. But I have an issue.I Ihave used The Perfect Customac Pro - macOS High Sierra 10.13 on X99 - Full Success guide. I have 2 x GTX 1080 Pascal GPU (MSI Gaming X +) I fixed my GPU with AGDPfix (Black Screen +...

My usb 3.0 is working in High Sierra 10.13.2 on ports that aren't being treated as hubs. The HS03 port/hub is my four USB 3.0 rear ports, and all four ports are underneath device HS03 and in the factory DSDT are assigned HS15-18. I believe the SSP3 port/hub is the super speed corresponding to...

I'm not new to the hackintosh world, but it's surely been a while. First of all, happy new year. I recently built a massively overkill X99 system with the following specs: - Intel Core i7-6850k - MSi X99A-MPOWER - 16GB DDR4-3000 Corsair Dominator Platinum - Samsung 850 EVO 250GB - MSi GTX 660...

I'm getting this error code (image is attached) when i try to boot in any of the two (Pendrive or HDD). Installing High Sierra ver. 10.13.1 The Unibeast is 8.1 The Multibeast is 10.2 The clover version is v2.4k r4359 My specs are i7 5820k, Asus X99 Strix , Asus 980ti Strix and a 2TB WD Black...

hello guys, is my hardwares compatible with hackintosh ? I need help i try it from two days ago i had constantly somme error or crash at the installation state... Im really done ...

My specs is as follows: i7-5820k Asus X99 Strix Mobo ASUS GTX 980ti I'm unable to use the keyboard and mouse when i go to the lock screen. Does anyone have the same problem ? and how did you rectify it. I'm using the latest version of High Sierra 10.13 and please tell me the values and how to...