wont boot

My verbose Screen

I've had my hackintosh for about a year and haven't really had any issues until now, so my experience with troubleshooting is definitely a bit limited. I downloaded Waves NX which is a program that makes any pair of headphones 3D Audio ready. After installing it, I had issues with playback on...

After months of running High Sierra, Windows 7, and Linux on my machine, my OS X install suddenly refuses to boot. When I boot in verbose mode I can see the system trying to mount Disk3s3, stating that it's unreadable, unmounting it, and then just hanging indefinitely. I am still able to boot...

I updated Clover to 4644. Now I cannot get past the black loading screen. It stops at the place seen in the attached photo. I don't have a backup USB. And I would like to keep my files. I was running Mac OSX 10.12 (I think). I do not have another Mac. I only have a Windows 10 PC. Any...

EDITPlease forgive me as I am a first time poster and haven't had any issues since i first built my rig a couple years ago. I'm pretty rusty at this point if it isn't made glaringly clear from my obvious mistakes that you're about to hear about... Ok, here it goes... I tried to do the update to...

Hi all First time building. Ive followed the process to the letter and have an “almost” operational High Sierra desktop. The problem..... ( besides slightly glitchy graphics) is when I restart the system it goes into what I would call a loop. The system goes to the boot menu...then to the...

I'm completely stumped and needs some guidance. I used my MBP to install High Sierra to an SSD connected thru USB. I installed clover from my MBP copied the config.plist from my previous installation that worked. I used the newest multibeast on the freshly installed volume from my MBP. Copied my...

Hello! Yesterday, my hack was working perfectly fine, with macOS running from my SSD. I left for lunch and when I came back, it was booted into my windows SSD instead. (separate drive) I tried rebooting and selecting my Mac SSD in the BIOS, but it wouldn't boot from it anymore, even if it was...

Hi there, I recently created a Hackintosh running 10.12 Sierra, and everything worked great. I used Inject Nvidia & 8111C Ethernet kexts. Yesterday, my hackintosh refuses to boot. This is what happens: 1.) Turn computer on and BIOS screen appears normally 2.) Clover automatically boots into my...

when i change my motherboard settings to primary display PCIE it will show the apple logo then wont go past a black screen but when i use cpu graphics it loads completely my specs are: mobo:B150M-A graphics card is a:1060 3gb 16gb ram

Hey guys, brand new to the forum. I'm trying to installed Sierra on my computer, but can't get the installer to boot. I used the same bios settings found here: https://www.tonymacx86.com/threads/success-sierra-asus-prime-z270-a-i7-7700k-4-2ghz-geforce-gtx-1060-32gb.221392/ but it gets stuck...

Hi, I have followed the Sierra Desktop Guide, and hence created the USB, and installed macOS on my SSD. After the install the system restarted. However, I can't boot into the SSD to setup. My system config is as follows: Gigabyte Z170X Gaming 3 Motherboard Intel Core i7 6700K Gigabyte...

I've made a macOS Sierra bootable USB using with clover, but when I try to boot from it, I get a message saying that "Thread 0 has crashed", along with "Mac OS version: Not yet set". My PC specs: GTX 750Ti 2GB 8GB DDR3 Intel Pentium G3258

I took my hackintosh drive out and put back my windows drive and when I got done I put back my hackintosh drive back in and now I cant boot back in EL Capitan can some one help me please

Install get halfway then restarts computer? So I got a new mother board and now when I go into the OSX installer page and press eneter I get the apple logo. The progress bar shows up, it goes close to half way. Then I get taken back to the OSX installer page.

I formated my usb with clover and used the UEFI bootloader and when i try to boot to it i get no output, no screen change. My screen just sits there but is locked up (arrow keys dont select boot device) until I restart with crt + alt + del. Is there any logs that clover creates that I can...

Hi All, Managed to get my install semi working but whenI tried to install the ALC1150 sound drivers from multibeast my machine now won't boot without me using -f flag and still there's no sound device installed in system preferences. System: ASRock H97 Killer Fatal1ty Motherboard...

Hi All, All was working wonderful on mavericks, did a fresh clean install of yosemite. Installation went smooth, no issues. The second i use multibeast, the box will not boot. I get a white screen with a loading bar (frozen) -v mode i see the following:crazy:

Hi, A friend of mine has a HP Pro Book 4530s that has successfully been running OSX 10.9.1. He uses it mainly for tethered capture on photo shoots for his photography business. Recently he went on a shoot and managed to fill up the hard drive with photo's, since then he has no longer...

I keep restarting it and it wont boot up can anyone help me figure out the problem. Thanks Jake