Hi,
I recently installed mojave and already followed this guide to patch my usb but I don´t get some steps and further my pc will crash when booting with the suggested boot args.
Also my RX580 won´t work. My geekbench is ridiculously low and I can´t figure out why.
Any ideas?
I have a gigabyte H310M motherboard, booted and installed Windows properly, but now can't get it to boot the Mojave USB.
BIOS options are set to the right ones for hackintosh.
I can get the USB detected and showing up in the boot devices by enabling CSM but then can't boot it at all, I only get...
I was reading the guides to create a custom SSDT for my usb ports:
https://www.tonymacx86.com/threads/guide-10-11-usb-changes-and-solutions.173616/
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/
In the first guide, I think it states that...
Hello,
I have been running High Sierra for a few months now with no issues. I decided to install a new SSD for my Windows Drive (separate drive from my macOS SSD), and now clover only sees NTFS and old mac backups. I know the drive that has my High Sierra boot partition on it is working...
Not sure this is just me.
I have my Mojave upgraded to 10.14.1, and by using @RehabMan customized DSDT method. All working fine, until I reboot it with USB drive plugged in. USB drive won't be mounted automatically, I have to unplug in then re-plug back in to have it shown.
Please help...
Struggling to get the USB drivers working during the OS X Mojave installation. Picking up the optical mouse, I can see the USB ports are not being switched on during the installation process as there is no light coming from the mouse once at that point. I've tried all the USB ports to no avail...
Hi all... I've been running into an issue since Sierra released and I'm just now having the time to fully troubleshoot. My USB cameras will not display video. Both were working fully in Yosemite.
QuickTime and other applications recognize them, but only as audio devices. System report only...
Hi guys!
First things first: I'm a complete newbie in the world of Hackintosh.
I'm trying to install High Sierra on my XPS 9560, but, as the title says, I'm stuck at this point.
I created a bootable USB with Unibeast on a real Mac, following the guide on this forum and you can find my laptop...
Hello,
I have a ASUS ROG STRIX H370-I GAMING Motherboard and I created a bootable UEFI USB with MultiBeast 9.0 the USB is readable in macOS an everything looks fine.
I was able to change most of the points.
I can't deaktivate no. 5
and I cant find no. 7
How am I able to install macOS...
Hello All,
i closely followed KGP guide "how-to-extend-the-imac-pro-to-x99-successful-build-extended-guide" to upgrade from MacOs 10.11 to 10.13. Everything work like a charm ... except more than ±30Gb USB3 file transfer.
There is no system error or problem while reading the (big video) file...
Hi, so, I have just updated my hack by switching the NVIDIA GTX 1060 graphics card fo the RX 580. I did the change in High Sierra, everything went great, I booted in HS with the new card no problem.
Then I decided to give Mojave a spin and started the installation process. By this time, I have...
I had a working hackintosh with external hard drives supported on USB 3 but once I updated from High Sierra to Mojave, my USB 3 support is gone. My hackintosh does not recognise external hard drives. I tried USB Inject all, fake pciid and generic usb kexts and all available options on...
CPU/GPU PM seems to be working as x86PlatformPlugin and AGPM both run with PluginType=True.
Upon putting the laptop to sleep, it just reboots.
System hardware details:-
MoBo - MSI GV62 (HM370)
CPU - i7 8750H
GPU - Nvidia gtx 1060 (disabled), UHD630 (full acc.)
Screen - 1920x1080 wide view full...
1 HIGH SIERRA SSD
1 WINDOWS 10 HDD
Booting via USB installation drive clover, I can boot any hdd.
BUT from clover installed on hiGH Sierra SSD there is no boot from windows efi entry available.
The clover in usb shows all entries. Including boot from EFI, which works and boots into the windows...
I have a problem with my keyboard and mouse not working on the language screen, so i put the USBInjectAll kext (2018-0420) in my kexts, and the
<key>KernelAndKextPatches</key>
<dict>
<key>KextsToPatch</key>
<array>
<dict>
<key>Comment</key>...
Hey guys,
Hope I have posted this in the right place, just completed my first build and everything works great so far, excluding my interface. The Audient ID software will not open. The device is recognised by the system and is named Audient id22 as it should be. I have tried it in a Hub, in a...
Didn't see any other posts that we're specific to this problem. Recently, I got a Type-C USB hub and any drive I plug into it does not show up in macOS High Sierra 10.13.6.
All the other USB ports seem to work fine. It powers on, just doesn't seem to transfer data etc.
Hello, i'm building a hackintosh, and i currently cannot use my usb's after booting with the correct bios settings and with verbose mode on, i dont know why this is happening :(
Hello there.
I'm currently having problems at this step. I've been reading many information I found using the search feature and most of them suggest to use USB 2.0 instead of 3.0 (which I did). Also using the USB ports located at the rear, trying on different ports but I had no luck.
I'm...
Hi,
I had finished my system install on i5-8400/ASUS Prime H310T/WD Black SSD (gen2). I originally chose APFS to be my file system; the system installed correctly. However, after I set up my system with Multibeast and rebooted, I lost power button and all USB response (on both USB 3 ports and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.