usb 3

Hi guys, I've managed to install 10.11.5 to this wonderful laptop. I'm using macbookpro12,1 model with clover uefi. Everything works fine including sleep and audio. I only had to change wifi/bt module from original to BCM94352Z, but that was not a big deal. The 2 problems I'm still having are...

Hi guys! So I bought a Toshiba Q300 480gb to install El capitan on. I can boot when plugging it into My USB 2.0 port fine, but when I plug it into USB 3.0 or Sata, I get the "Prohibitory symbol" (https://support.apple.com/en-us/HT204156) after the loading bar is at about 60%. I installed the 3rd...

I have a GA-Z170X-Gaming 5 motherboard, I've installed multibeast, my usb3.0/2.0 ports work, but my usb3 devices will not work on them. They work fine with usb 2.0 devices. I tried all the multibeast options for this, I just can't get it to recognize my usb3 device (works fine on my actual mac...

Hello guys, Intro: I would like to first say, well done for the brilliant work youve been doing. I have an issue with my Hackintosh, i decided to upgrade and looked at people that have a similar mobo as me, who also upgraded and they seem to have it all working. Issue: in this mobo, there...

Hello i have this strange problem: My external hd (WD Elements guid, hfs+) doesn't get recognized if i attach it to an USB3 port in El Capitan. Not even in Disk Utility. Instead, if i plug it into a usb 2 port, it works normally. With mavericks it worked normally. How can i resolve this...

OK, working on a system for a buddy. Everything is running great, even a complex graphic situation is sorted! Now... USB 3.0 isn't working yet. BIOS settings: vt-d is disabled, XHCI - Auto, XHCI handoff enabled, AHCI handoff enabled. Is there a setting in Clover that should be able to...

USB drives Not Ejected Properly on wake from sleep. [Yet another solution] I wrote a applescript app to install sleepwatcher and eject + mount scripts that affect only USB and USB 3 drives. I did this because I don't like that Jettison.app messes with SATA drives too. I have my hot swap bays...

Hi Guys, Just when I thought I have reached full functionality, I just noticed that my usb 3.0 port is not working :banghead: I am using RehabMan's generic USB 3 kext. I have enclosed the IOreg file. I have tried to change the IOPCIClassMatch to IOPrimaryMatch and replace the value with my...

After upgrading my hackintosh to Yosemite, I lost the front panel USB 3.0 ports on my CPU. While researching fixes to do resolve this issue, in the Gigabyte GA-Z77-DS3H bios I accidentally turned off USB 2.0 support. I've been able to use the CPU through the 2 USB 3.0 ports (and hubs). But...

i was think about upgrading from a series 6 motherboard to either a 8 or 9 series motherboard what would be my best option? Also how would I go about upgrading OS X on the new motherboard?

1) do NOT install the "universal USB 3.0" in Multibeast. Check About This Mac/ full report/ usb to see that the driver is AppleUSBXHCI, and NOT GenericUSBXHCI. If you have GenericUSBXHCI installed, remove it. (edit: this still works, but see below.) 1a) contrary to the info in Multibeast...

I'm actually running a 2009 MBP. It isn't equipped with USB 3, but I've been using an expresscard 34 with 2 USB 3 ports. I've relied on MultiBeast for the last couple of years through the multiple OS X updates to install a working USB 3 driver. Since the Yosemite update, the driver no longer...

I have been going through the forum like a mad man trying to find a board that supports USB 3 at USb 3 speeds with external hardrives without the drives getting randomly disconnected or a ton of kext switching to find the right one. i have seen many people claim their usb 3 working but the...

Hi guys, I recently made my custom gaming computer into a Hackintosh Pro running Mavericks. I have gotten everything working correctly but I just can't seem to get iCloud, iMessage etc working. I always get an error about communication/authentication. I'm using a WIFI USB Dongle and am not using...

Hi, GA-Z87X-UD5H Bios ver. F7 have 6 USB 3 ports on back panel and FOUR on bottom and TWO on top, right next to ps/2. Bottom four usb 3 are not working. I tried Tried different USB 2 and 3 drives in both Windows 7 and 10.8.4. Still no luck. But, two on top and usb 3 headers are working...

Hello all, Finally have my Hackintosh running great, but have one minor issue. I installed the USB 3.0 kext from Multibeast 5.4.1 and was pleasantly suppressed to find I now have the front case USB 3.0 ports working just fine (tested an external 3.0 Seagate drive and saw read/write 160 MBps...

Today I installed a front panel usb 3 that connects to a usb 3 header on my motherboard (Asus p8z77-v pro), problem is when I plug my usb 3 hard drive into it my whole system freezes. Someone on chat suggested I install the ASMedia USB 3 Package, which I did, this fixed the front panel usb but...

An upcoming video project demanded the use of USB 3.0 on my current workstation, but my (now ancient) GA-P55M-UD2 mobo maxed out at USB 2.0 Scouring forums and posts led to the recommendation for the following *PCI-X2* expansion card from Amazon.com ORICO PFU3-2P Dual Port MAC USB 3.0 PCI...

This is for the GA-Z77X-UD5H bios, but should work on other motherboards with the same BIOS feature settings. Enable USB 3.0 BIOS settings: 1) XHCI = Smart Auto 2) XHCI Pre-Boot = Enabled 3) EHCI Handoff = Enabled 4) XHCI Hand-off = Enabled Ritey ..

I installed the multibeast 3.0 kext and it now disabled all my USB ports. what do i edit or remove to remove the kext? Thanks!