Hi,
I've been trying for the last few days to install Sierra 10.12.16 using a boot disk created by Unibeast, and seem to be stuck.
When I boot and hit F12, I get two options for the USB Stick, one called Mac OS X and the other UEFI.
If I boot to Mac OS X with the clean Unibeast 7.1.1 install...
I don't know if this is a problem posed by MultiBeast or Clover--but I install Clover with the EXACT SAME SETTINGS as my USB drive, and it completely prevents my system from booting, and I'm forced to go into the recovery HD to delete the EFI partition. From there I can boot using Clover on my...
Hi,
I'm French so sorry for my poor english, I'm trying to make a hackintosh on my actual PC based on
MSI Mortar Z170M
I7 6700K
HD530 of the I7
250Gb SSD for system
1tb secondary hard disk
And, a Pcie firewire card, but i take it off for the installation
I use a Sandisk 32gb USB3.0 Stick
The...
Guys, I'm really desperate...
I got my hackintosh running for years (first under Mountain Lion, Maverick, Yosemite and last El Capitan). Now I bought a new SSD (500GB) and wanted to install macOS Sierra. And nothing works:
I installed Sierra via UniBeast. But the Post-Installation with...
So I recently built another hackintosh, and just got round to putting mac os on it a few days ago. However it freezes when I boot from the usb on the apple logo with the loading bar and doent load.
BTW I created the USB Using unibeast on my friends macbook
My PC specs are:
Mobo:Gigabyte...
I used the unibeast and was not able to see my usb bootable in my pc :( I tried to change the BIOS setting but no luck. I need some suggestion and also i think these might be the problem not sure let me know what ya think too
!. USB is 3.0 16 gb stick
2. UEFI or Legacy mode
3. Setting in my BIOS...
After a lot of attempts to install my first Hackintosh with all the recommended hardware from this site, the furthest I got is this screen after Clover bootloader where it says "This version of Mac OS X is not supported on this platform" (picture attached). Any help would be really appreciated...
I installed Sierra using Unibeast on my PC with intel core i7 6700k, asus z170 pro gaming, tp link n900 and as a gpu i want to use my hd graphics 530. For the post installation i used multibeast and installed the clover boot loader and the hd 5xx driver on my hard drive. Now when booting it...
Hi I wonder if this is possible since I made the Sierra install USB stick from the guide but the PC will not boot "no operating system". I made a UEFI boot from the latest Unibeast (Sierra). Excuse a newbie question but how can a PC boot from a MacOSX Extended partition? Anyone know if Sierra is...
I have a Asus CM6650 Computer with a Asus P8H67-M Pro motherboard and I am trying to boot clover to install Sierra. However, once I try to boot Clover from a USB, I see black screen with a cursor. I used Unibeast to create the Sierra USB for both Legacy and UEFI to install the clover bootloader...
Hi, i have an Alienware R3 17 with GTX 970m, i'm planning to install Sierra on an External HD(my old macbook pro 2010 hd with a sata to usb 3.0) but i have a question after i set unibeast for the bootable usb, i can choose to boot from this hd? and after restore this and install Mac OS Sierra by...
Hello from indonesia, I make my 10.12.6 clover uefi installer with unibeast, copied all my kext and config plist (running well in 10.12.3) but i got stuck at kernel panic (attached picture). Kind of help will be appcreciated!
Hi there, I've just bought a new HP 15 ay-108ne pavilion laptop, it comes with a 7th generation Core i5 Intel processor with a DDR4 4GB of Ram and a 500gb SATA HDD.
It's FreeDOS and I haven't installed Windows or Linux, it's still FreeDOS so I can't determine the Motherboard name/manf/etc or...
I have tried tons of ways to try fix it, but I can not boot to clover unless I have the UniBeast USB plugged in. It says there is no operating system installed. I tried copying the EFI folder from the USB but that also did not work. Anyone know how to fix it? Thanks
Hello, as the title says I'm struggling reaching the bootloader.
I've booth used Clover and Unibeast in every possible configuration, (both for MBR and gpt) both UEFI and LEGACY. Both formatted in different MBR and GPT tried booth of them.
And yes i've tried using both F11 to choose what device...
Hello ! I made a bootable usb with unibeast os x el capitan.When I try to boot el capitan,it gives me an error and restart.What I need to do to make it work ?
My computer specs :
MSI H81M-E33
8GB RAM DDR3
Intel Pentium G3220.
gainward Nvidia geforce gt 430.
Hey Guys,
This is my 3rd Hackintosh build but I haven't been apart of the scene in a while.
Here is build:
CPU: Intel - Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Corsair - H110i GT 113.0 CFM Liquid CPU Cooler
Motherboard: Asus - Z97-PRO(Wi-Fi ac)/USB 3.1 ATX LGA1150 Motherboard...
I have two monitors connecting from VGA to my pc via Displayport using a VGA to Displayport adapter. I'm booting from the onboard graphics on the i7-6700k CPU (Intel HD 530) on Sierra via Clover.
Now, I did a little bit of playing around on the settings and found out that
Booting from...
I have a very old but very reliable hackintosh, that i am running for years. Some software i run needs minimum El Capitan so i decided to give the old horse one last update before retirement, installing Sierra (Updating from Mavericks).
The machine is a Gigabyte Ep45-UD3p with 8GB ram, a GT9500...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.