1. buddhabackpacker

    Upgrading GPU Advice: UD5H/i3

    Built my desktop in 2013 with GIGABYTE GA-Z77X-UD5H and i3 3225 Ivy Bridge CPU using onboard HD4000 graphics. It has been working solid since then. Now I need to upgrade my monitor, and am looking at either 1440 or 4k resolution. I will need a GPU which is a brand new concept for me. I...
  2. drpidude

    Help updating from Yosemite (10.3.3) to Mojave on a Gigabyte Z77-UD5H board

    I put together my customac years ago. The same rig has been running windows for the last few years, and a family memeber was using it. There was a drive in the computer that I had labeled "osx" with a piece of tape. I tried plugging it in, not expecting much, but to my surprise, it successfully...
  3. clueles5user

    Boot failure - GA-Z87X-UD5H 1150 ATX - HELP!

    Hello, this is my first post on the forum. Of course it comes because I'm having hackintosh issues and I'm not the most savvy of users. Here are my specs: Gigabyte GA-Z87X-UD5H 1150 ATX INTEL CORE I7-4770K CORSAIR 16GB 2X8 DDR3 1866 EVGA GTX760 SC 2GB DDHDP Samsung SSD 120GB 840EVO I've been...
  4. konjow

    Z77X-UD5H USB3 10.12 Sierra

    I have this board since ML 10.9 so it is not discussed anymore. It still works for me however I noticed recently that my usb3 does not work properly in my 10.12.5 sierra. Can someone point in the current up to date solution to fix it?
  5. tommy2gunz

    Sleep not working on New El Capitan Install (Z77-UD5H)

    I just finished a fresh install of El Cap with Clover. Everything works except sleep. When put into sleep, it sounds like it powers down with fans shutting off, but then it suddenly comes back with the fan quickly turning up and PC wakes up. I've searched all through these forums and see TONS...
  6. Alcatraz6

    Video and external HD issues on El Capitan Fresh installation. (GA-Z97X-UD5H-BK, i4790k, EVGA GTX 96

    :headbang: Hi everyone! I've succesfully installed El Capitan and as long as I am testing, I have some issues with the video card. At the login screen, its hard to see my name and the password input because its kind of grainy pixelated. And then it all looks fine when I'm logged in. Then, tried...
  7. thefilthiness

    [Solved] Help! GA-Z77X-UD5H + i7-3770K + EVGA GeForce GTX 970 ACX 2.0

    Hello, I've been building Hackintoshs for last couple of years (since mountain lion) and haven't run into a whole lot of trouble. I was able to get El Capitan running on a work Hackintosh. However, doing a fresh install of El Capitan on a home machine has been rough for some reason, maybe...
  8. thekronz

    So close! Freezing and start-up issues. 10.10.2 / Z97x-UD5H / i7-4790K / GeForce GTX 650 / Chimera

    Hey everyone. This is in reference to the build in my info/the title. Smashing my head against the wall over this one. Got everything up and running. Have been using it frequently, edited a music video on it, no problems, except for some small quirks. Quirk 1: So at first, it took 2-3...
  9. TVchew

    My gear, is it the right one?...

    I just bought this: Mother Gigabyte GA-Z97X-UD5H BK Inter Core i5 4690k 8GB DDR3 HYPERX Fury 1 TB 3.5" HDD No graphics card yet, mostly I will use it for 3d modeling in Rhino, Music production, sound desing and a little bit of gaming (mostly RPG)... I wanna have Mac and Windows on it...
  10. RichardRL

    Z97X UD5H i5-4690k Help Needed

    To get past the deadbeef error I used -no-zp, but I can't get past the second one.
  11. eduardoo29

    First time Hackintosh -- Stuck on Apple logo

    Hello guys, I just built my first hackintosh. I followed all the instructions thus far on installing the OS, but every time I try to boot up it just gets stuck on the apple logo. I've looked around a little bit and have tried various boot flags, but I can't seem to get it to the install screen...
  12. thebigkahuna

    IOUSBFamily did not receive enough extra current for the SuperSpeed device (Device Hub)... asked for

    I've gotten the error in the title and tried to find workarounds on the forums but none seem to work. I tried KextBeast with the GenericUSB kext. But that resulted in none of my USB 2.0 ports by the P/S port working or any SS USB3.0 ports working. I also tried unplugging the power supply for...
  13. hoihallo

    Compatibility older motherboard newer graphics card

    Hi, Maybe it's a stupid question, sorry for that, but I want to buy the right card. I have a GA-Z77X-UD5H motherboard Is that compatible with a MSI N760 TF 2GD5/OC graphic card? The card is currently on the buying guide december 2014. thanks, Victor
  14. ElCrasto

    Freezing/Crash High CPU Useage Yosemite

    Hi, System: Intel i7 4790k Gigabyte x97z-ud5h Ballistix Sport 32Gb Gigabtye GTX 780 Ti Corsair Water Cooler H100 OS X Yosemite Finally got my hackintosh up and running, without randomly locking up, left it on over night and it was still working. Went to do some work on it 3D animation...
  15. frankJXL

    Wildly Slow SSD Speeds on Hackintosh

    Hi there, I've looked and searched through the forums and I haven't been able to pin down the exact cause of this issue. As you can see, my read and write speed are absurdly low. It could be due to the SATA ports I'm connected to. But I'm not advanced enough to know the difference between...
  16. gozasc

    Z97X-UD5H-BK Problems

    Hi all, Using recommended parts lists, I purchased a Gigabyte Z97X-UD5H-BK board with an Intel 4790k i7. Using integrated graphics only, I booted from my Unibeast drive and began the installer (white screen w/ Apple logo). Shortly after the progress bar begins filling, the computer reboots...
  17. phillymavs32

    Questions about upgrading Z77-UD5H from Mountain Lion to Yosemite

    I really wanted to know the process of what this would be, before I start to prep everything.. Would I have to go from ML to Mavericks then do Yosemite or could I just jump straight from ML to Yosemite? Also, would Time Machine backups work well to revert on Yosemite or would I have to restore a...
  18. mrsubtle

    Gigabyte Z97X UD5H + I7 + Gigabyte GTX770 4GB

    Hello! I'm now trying to find the proper settings for multibeast for 10 hours now and I'm becoming mad :-( I7 3,6 GHz 4790 LGA 1150 My mother card is a Gigabyte Z97X UD5H my graphic card is a Gigabyte GTX770 4GB 4x8 GB Ballistix sport DDR3 1600 OSX Mavericks I have some troubles : 1/ I have...
  19. martyv69

    Almost Perfect GA-Z87X-UD5H Hackintosh: Display won't wake from sleep / CMOS reset necessary

    I'm so close! My Hackintosh (Mavericks 10.9.2) and display (DVI) falls asleep just fine, but the display won't wake from sleep. When this happens, I receive the debug code 13 on the motherboard, which means "reserved" according to the manual. When I manually reset, I can't even get a POST...
  20. livingsmarttv

    Overclocking but strange performance in Mavericks

    Hi! Our UD5H motherboard / i7-4770k is originally set at 3.5ghz. After building the hackintosh, we overclocked it to 4.5 and two "strange" things happen: 1. When looking at system info, it doesn't seem to recognise the 4.5ghz but only sees it at 3.9ghz? 2. When doing different benchmarks...