turbo boost

  1. spukhoo

    Turbo Boost not working on Mojave. i7-9700K

    Hello! I have installed the Intel Power Gadget utility and i've realised that my CPU peaks at 3,7GHz on load instead of 4,9GHZ (turbo boost speed).I have attached my EFI folder.Could anyone give me some advice? Thank you!
  2. Jolamaster

    Turbo Boost on Mac OS Mojave Not Working

    Hi , i already saw some other posts about this, but the latest guide i saw was for Mac os Mavericks. So i am a little afraid of going on with the guide since is so outdated and might not work for Mojave. Im running a i7 3700 With a GA-h77DS3H and my clock speeds don't go up than 3.4GHz when it...
  3. H83

    No Turbo Boost with a i7 7700K

    So, I upgraded my Pentium G4600 to a i7 7700K on my High Sierra Hackintosh today and I decided to run some benchmarks. Cinebench results (2nd and 3rd results) were below my expectations and the standard results for a 7700K (1st result). I decided to check the temps while running Cinebench a...
  4. Piero97

    Intel i7-4510u PStates wrong?

    Hello to all, I think i ended the setup of my hackintosh, but I'm not sure, and here's why. Audio/Graphics/HDMI/HDMI_Audio/Keybord/TouchPad/WiFi/Bluetooth all of them works fine. My only "problem" is CPU when on 100% doesn't reach his maximum frequency and stay stucked on 2800Mhz instead of 3100...
  5. DeepHollow94

    [SOLVED] Temperature Cpu 8700k

    Hello everyone! I have a working 99% hackintosh, the GTX 1080 does not work, there are no drivers, and I do not read the cpu temperature, and the turbo boost does not work ... How can I do? I've attached my EFI folder
  6. ziopecos

    Disable turbo boost lenovo x220 High Sierra 10.13.6

    Hello everyone, I have this wonderful laptop for 2 years, works perfectly if not for some overheating (80-90 ° C). Now I want to ask kindly if someone can tell me how to disable the CPU boost turbo function, I tried disabling the function from the bios but when I try to start macOS he keeps...
  7. rapproducer714

    Help with HWMonitor

    Hey guys, I want to monitor my CPU frequency with HWMonitor on my iMac, but it says I need FakeSMC for reading of the CPU frequency, but I'm afraid of ruining my macOS install if I install FakeSMC. I want to test my results against Intel Power Gadget cause my Turbo Boost isn't working and I...
  8. rapproducer714

    iMac doesn't Turbo Boost

    Hi guys, I was testing thermals on my late 2015 full spec iMac and while using the "Yes" command in Terminal and using Intel Power Gadget to monitor CPU clock speed, I noticed my iMac never reaches 4.2Ghz like it is supposed to with it's Intel Core i7 6700K. I tried inputting "yes" once to...
  9. sightlysuperior

    Troubles with proper turbo boost frequency

    Hey, So I recently noticed that my i7 4790 (Not K) Isn't getting to a turbo boost frequency of 4.0Ghz but rather topping out at 3.8Ghz Is there a solution to this? I assume it has something to do with the iMac 14,2 SMBIOS I am using and the slightly different CPU choice from a 4790K which...
  10. awesomeepicguy

    Boot.log Significance

    Hey everyone, I just discovered Boot.log in Clover Configurator and generated one of them, and its mentioning a bit about sleep and CPU, a couple things I have problems with. Otherwise my hackintosh is working great. 1. CPU Turbo Boost not working (6700k) 2. Computer sometimes boots up...
  11. Carlox97

    Unable to reduce/edit i7-7700k Max Turbo Frequency

    Hi, I have installed macOS 10.13 High Sierra (clean install) on my PC and @RehabMan Kexts to monitor temperatures and other stuff with HWMonitor. I'd like to avoid the processor to reach 4.4GHz in order to reach a maximum of 4.1 GHz, but I'm unable to do it! I tried the following: Disable Intel...
  12. jktaurus8

    Only Getting 3.60Ghz instead of 3.90Ghz Turbo Frequency in 6600K

    I have intel i5 6600k and Gigabyte Z170x Gaming 3. In my hack all working perfectly expect the turbo boosting. I already installed the ssdtPrGen but it not helped. Ioreg hardware monitor Screenshot SSDT.aml are uploaded.. Please help me to fix.
  13. Tazzu

    No Turbo boost in Sierra

    Hello everyone! I updated to Sierra via Clover and everything is working fine exept the Turbo boost of my Ivy bridge i5-3570K on Asus Z77. I have tryed the changes from this thread: https://www.tonymacx86.com/threads/turboboost-not-working-after-updating-to-sierra.202895/ Tried MacPro5,1 and...
  14. rapproducer714

    Intel Turbo Boost Not Working

    Hi guys, I've had this issue for as long as I can remember running OS X and I gave up on it and haven't cared to resolve it until now. My CPU doesn't clock up to 3.4GHz like it's supposed to under heavy load, such as when I use the "yes" command to stress the CPU. The base frequency is 2.7GHz...
  15. Popyura

    Trouble activating Ivy Bridge turbo boost in Yosemite

    I've spent ages trying to figure this one out, have searched the forums, tried the SSDT + kext patch method outlined in a few different posts, have tried a number of BIOS settings... but nothing I try is enabling my CPU's frequency to go past 3.4GHz. I've got an i7-3770 which can turbo boost to...
  16. revillug

    How to sleep and make cpupowermanagement work?

    Hey guys, Been running OSX 10.8.3 on my Acer E1-571 8gb ram, i5 3rd 2.5ghz, intel 4000hd for almost 3 months now! with not one major hiccup! i just want to enable sleep and the native cpu power controller.. So on my system, im using no DSDT (as there is no need, plus i haven't got any idea...

    [Turbo Boost not working] GA-Z77-DS3H (rev 1.1) BIOS F9 + i5 3570K

    For some reason Turbo Boost is not working properly. If I set EIST to Auto or Enabled, it won't go past 3.4GHz, if I disable it, it will throttle from 1.6GHz directly to 3.8GHz, so even if I try to set a higher multiplier, it won't work as I want. I want it to go from 1.6GHz > 3.4GHz > 3.8GHz...

    Build ZERO - GA-Z77-DS3H (rev 1.1) BIOS F9 + i5 3570K + EVGA GTX650 Ti

    Build ZERO - GA-Z77-DS3H (rev 1.1) BIOS F9 + i5 3570K + EVGA GTX650 Ti Components Mac OS X 10.8.3 Mountain Lion http://itunes.apple.com/us/app/os-x-mountain-lion/id537386512?ls=1&mt=12 Corsair Carbide 200R Case http://www.amazon.com/dp/B009GXZ8MM/ Gigabyte GA-Z77-DS3H (rev 1.1)...
  19. sshanky

    Difference between Sandy Bridge Core i5 and i5/i7 Overclocked SSDT.aml choices

    Hi, I'm step by step making my way toward overclocking, but I'm new to the Hackintosh world. Today, as part of this project, I installed hwmonitor and learned I was stuck at 1.6 GHz on my i5-2500K, so I installed the SSDT for "Sandy Bridge Core i5" (description: "Optimized SSDT supporting Sandy...
  20. kermit1219

    Please help need DSDT / SSDT for Gateway FX6831

    Please help need DSDT / SSDT for Gateway FX6831, is there any way to get the intel Turbo Boost working? I'm running Lion 10.7.4 and kinda lost with all the dsdt information, I've read both DSDT guides with not much luck. If I could find a decent 1156 socket board that was supported I would...