sandy bridge

  1. Leoqwer

    Catalina and 9500gt

    Hello, all! after 6 years on Yosemite I decided to update, but even forgot my password on this site) And now problems begin) 1- Downloaded Catalina from app store 2- Created a usb installer with latest Clover 3- After first reboot appears window with information about error Help please...I do...
  2. ttc

    Intel 6 Series Fix [...]

    I installed Catalina on my Medion X6815 Laptop with an i7-2670QM. However some things are not working: USB3 ports not recognized, Turbo Mode (i am stuck at max 2.2Ghz) and Shutdown. I tried already many of the fixes given by MaciASL but actually i did not solve any problem by my dsdl patching...
  3. Comcody

    Catalina - Sandy Bridge only boot with -v

    Hi, i just updated my old rig that was using perfectly stable macOS Sierra to Catalina 10.15.3, installation from the pen drive went well, the second boot to complete the installer from my SSD got a panic crash and shut down when the Apple loading bar was about to finish. Got the installation...
  4. fill0r4

    Unable to boot without the USB

    Hi everyone! I've finally installed macOS on my system by UniBeast 10.0 and all work fine (audio, wifi, ethernet etc) there's only 1 issue: I can't boot without the usb installer. Searched on the internet for a fix and I founded out that I need to copy my EFI Folder from the usb to the SSD, so I...
  5. simox2k

    ASUS K53SC - BIOS Version 221

    Good evening to all. These days I tried several times to make my ASUS K53SC a Hackintosh without success. The USB flash drive is not detected by the system as bootable. I currently have no operating system installed on the laptop and I have no mac system from which I can create an installer. I...
  6. wavecraftproject

    Issue booting from USB Mojave on Ga-z68x-ud3h-b3 and rx570 pulse

    Hi I am trying to install Mojave on my system: I've created a Unibeast USB bootable stick (formatted with GUID partition table and Mac OS Extended file system) with Legacy mode (i have F12 Bios on my Ga-z68x-ud3h-b3 mobo) and without ATI/NVidia injects (Sapphire RX570 Pulse should be natively...
  7. MelanDias

    Is HighSierra 10.13.6 is Compatible with my PC? [Specs Below]

    I'm trying to install MacOS HighSierra to my current Desktop,Is it compatible with my specs Thank You! [SPECS LIST] Processor : Core I5 2400 [SandyBridge] MotherBoard : ECS Harrison 2 (H61-HM2) Graphics inbuild : HD2000
  8. Blackspell

    Blackscreen with RX570

    Hi, this is my first post in this forum, so i hope im not doing anything wrong... In fact, I had a working setup (Dell 790MT with i7 2600 and gt 710 with UEFI mode). Now I decided to upgrade my GPU as I want to buy a 4k monitor soon. Unfortunately, I havent managed to boot with the rx 570...
  9. applehacker321

    Dell Vostro 3450 Prohibition Sign During Installer

    I'm getting the prohibition sign halfway into the progress bar when booting from Mac OS Mojave USB installer. This is a SandyBridge Processor, therefore I'm using Mojave Patcher to create the USB Drive then using the following EFI Folder (see attached) similar to the Sandy Bridge ThinkPad x220...
  10. GiaThy

    Power Management problem on Sandybridge laptop

    Hello everyone I have recently installed Yosemite 10.10 on my laptop, which is Acer 4749Z|i7-2620M|HD3000|8GB Ram|500GB HDD. I used Unibeast to create a installer USB with Legacy boot mode. After installing it, i have installed many kexts, patched DSDT, SMBIOS (Macbook Pro 8,1). Everything...
  11. Frisootje

    System slows down and dies on Photos, no errors or panics

    Hi there, First time poster, long time member. Some background: I've now successfully built a Hackintosh with a Gigabyte GA77XUP4TH board and a Sandy Bridge i7-2600K, using Radeon RX580 gfx as I couldn't get my Nvidia card to behave with my Dell UP2715K monitor. With the Radeon installed, it's...
  12. namelessN00b

    Can't boot Clover

    I followed the guide to make the installer for Mojave and it worked flawlessly. My issue is that I cannot boot into macOS. I attached pictures of my setup and the errors. I tried to install Sierra firs because I saw a post that that worked, but the errors were even worse. Does anyone know...
  13. geoffreyweber89

    Mojave only boots from USB

    CPU: Intel i5-2500k Sandy Bridge Motherboard: ASUS Sabertooth P67 (BIOS Rev 3602) Graphics: ASUS Radeon HD 6850 Hard Drive: 120gb Transcend SSD I was able to install Mojave following the 10.14 Installation Guide and didn't run into any issues. I didn't use a DSDT or anything and installation...
  14. wavecraftproject

    Upgrade/Clean Install to Mojave or High Sierra from Mavericks for a Sandy Bridge i7 system

    Hi I would like to install/upgrade my Mavericks to a new version of OSX cause some of my Audio software doesn't work anymore (I am a composer working with high end audio software, some of the latest versions of my sample libs software like VSL VI PRO or the new version of Cubase 9.5 are not...
  15. tardis89

    Screen Freezes But Some Background Processes Working

    I am currently having an issue with my video freezing up after some time. I first tried messing with different settings in the Energy Saver settings. This seemed to postpone problems, but the inevitable still happened. I experimented to see if it was just a sleep issue, so I set both Computer...
  16. rodrigao

    Help with DSDT patching - battery status

    Hey, Rehabman. I Think at this point you are the only person in the world that can help me. I managed to get High Sierra installed and almost everything working on my HP dv7-4295US notebook, including ATI vídeo acceleration and SD card reader. But I cant’t get the battery indicator working. It...
  17. tardis89

    Intel HD3000 Screen Freezes Some Background Processes Working

    I am currently having an issue with my video freezing up after some time. I first tried messing with different settings in the Energy Saver settings. This seemed to postpone problems, but the inevitable still happened. I experimented to see if it was just a sleep issue, so I set both Computer...
  18. tardis89

    Fresh High Sierra Install Gigabyte GA-Z68MX-UD2H-B3

    I am trying to install MacOS High Sierra on my Gigabyte GA-Z68MX-UD2H-B3 motherboard. I have 16 GB of RAM and an Intel i5-2500K Sandy Bridge processor. I have everything unplugged besides HDMI, keyboard/mouse, and the USB installer. I have followed the standard install process for installing...
  19. ahmednabilkha

    Sandy Bridge Power Management

    Hello. I was checking AppleGraphicsPowerManagmement kext plist and found this difference in code between MBP 8.1 smbios & 8.2! 8.1 : </dict> <key>MacBookPro8,1</key> <dict> <key>IGPU</key> <dict>...
  20. Hamza003

    Need Clover EFI Bootloader.

    i need these Clover versions. 1. Clover_2.4k rev 4077. 2. Clover_v2.3k_r3676. i need one these version. Give someone if you have it.
Top