Hi.
About a year ago i have tried many versions of macOS with 4GB RAM, all of them had graphical problems, like artifacts. Now i have upgraded on the same laptop to 16GB, is there chance for macOS to work without problems? Thanks for help! :)
hi everyone. I have looking this website for a while.
There is tons of consideration before assembling Hackintos.
I have one question. it is about RAM. I see at buyer guide they advise crucial budget RAM up to Crucial Balistix elite.
Could I use another brand of RAM? thank you for advance.
my 4gb ram is always 100% used and swap used is mostly 30/200 mb
in the past it didn't reach that high
should I buy a 8 gb stick?
is every ram stick compatible with Mac OS?
Hi guys, I'm planning a new build, mainly for Audio production and Video Editing (FCP), i have selected all the components I want but I'm having trouble deciding how high end my Ram should be and how much difference it makes.
I'll get an Asus Z370-G + 8700k + RX580 (upgrade Vega64 eventually...
Hey there, I've just updated to High Sierra (that was a problem in itself) but after sorting all that out, I now have only 3mb of VRAM to work with, which is causing a lot of graphical problems as you can imagine.
Attached, is a screenshot of my 'About this Mac' - as you can see it only display...
Hi
I have an issue that appeared after i changed my original 8gb stick of ram 2 month ago (that was in my Asus g11cd) for 2 vengeance of 8gb each.
I’ve installed Mac OS Sierra on an external drive about 1 year ago and it was perfectly working and now i can’t reach the desktop. I can’t even...
Hello everyone,
I noticed that the motherboard I am going to buy (GA-Z270-HD3P) is compatible with DDR4 X.M.P. So I was looking for RAM with this feature and I found it is quite similar price. For example this one:
Corsair CMK16GX4M2B3000C15 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3000 MHz CL15...
Hi guys,
Any clue what that could be? I've tried adding the ram slots in Clover and also moved a couple of modules around but I can only get 40GB recognized out of 48GB.
Update:
Bios update to the latest version solved my problem.
As the title says, I can't boot using OsxAptioFixDrv.efi or OsxAptioFix2Drv.efi. I get a "boot failed" error whenever I try to boot my 10.11.6 and 10.12.5 partitions using these drivers. I can only boot using OsxAptioFix2Drv-free2000.efi which is not how it's supposed to be. Strangely enough...
Dear Community,
back in 2014 I build a CustoMac according to the Buyer's Guide. Unfortunately until now, I didn't get to install OSX on it. So far, the Sierra installation worked great, all hardware gets recognized perfectly by Sierra. But under load the system crashes hard. It happens, when i...
Which is the best practice?
Follow the buyers guide or buy a Qualified Vendor memory from the QVL of Motherboards?
I would like to buy this memory https://www.gskill.com/en/product/f4-3000c15d-32gtz that is in the mobo QVL but not in the recommendations of tonymac
G.SKILL Trident Z 32GB for...
hi,
My system correctly displays the quantity and speed of its RAM in 'About This Mac'. Albeit System Report shows 4 banks when the motherboard only has two (so the two 'ghost banks' are empty).
However I read an article recently which detailed how to tell Clover about the installed RAM...
I have tried multiple times before to install MacOS Sierra on my machine which I know is capable to do the Hackintosh, but I have failed multiple times and never got past the Apple loading screen during installation. My problem lies in getting the right boot flags and the right kexts...
I have run into the same issue as the poster in this thread. I am attempting to install Sierra from the USB to the hard drive on a new system. During the installation process, the macOS installer says that it will take roughly 12 minutes to install. It runs for about 5 minutes with no change to...
So this is a bit strange,
I purchased four sticks of 4GB PC3 10600R memory for use in my Dell t3600-based hackintosh (I used a pulled motherboard) used off of eBay from a reputable seller. The system runs fine usually for a little while, then starts to bog down, a LOT. The graphics get choppy...
is the same using CRUCIAL TWO(2) CT8G4DFD8213 8GB sticks bought separately as using the CRUCIAL 16GB kit(2x8GB)? as for dual channel and general performance, do I need to buy specifically the 16GB kit to give the hackintosh dual channel capability and better RAM performance? I ask cause, see...
HI All,
I have a hackintosh that is working with currently 16gb of ram its using the imac 14 ids etc.
its an ITX motherboard that supports up to 32gb of ram, if I upgrade the 2 8gb dims (16gb) to 16gb dims (32gb) will it have an issue in Mac OS?
it only has 2 dim slots because its a ITX...
Hi everyone,
I'm quite confused with this, I'm running my Gigabyte Z77 UP5 TH Hackintosh with 4x8GB corsair RAM sticks installed, but two of them run at 1333 Mhz instead of 1600 Mhz, as you can see on attached picture.
They're all basically all the the same sticks, although I bought em...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.