prohibit sign

Hi! So I've successfully built my rig and installed Mac os Gigabyte Aorus Z390 Pro Wifi Intel Core i7 9700k Ballistix Sport 32gb Samsung evo 500gb nv Sapphire Radeon RX 580 Pulse Corsair h60 The thing is that I got it running perfectly, even performed some heavy video renderings with no...

Hey guys! I am in a bit of a bind this week. My computer has been running flawlessly, with little to no issues. Unfortunately, I assumed that clover updates were simply just updating the main aspects of the app, not actually removing a key aspect of the EFI for it to boot... This core aspect is...

Hi everyone, I am an absolutely rookie in installing a Hackintosh. I bought all supported hardware and followed the guide. Unfortunately I'm stuck at the setup. After booting with my usb I managed to get to 3 quarter the setup bar and then the prohibited sign shows up. I Triplechecked my bios...

This is my first time trying hackintosh and I am completely baffled at what went wrong since I followed every step from the guide right. My build consists of: Intel Core i5-6400 Gigabyte H170N WIFI (BIOS F3) Sapphire Radeon RX 560 4GDR5 8GB RAM From what I've read from other people's posts, I...

Hello! This is my first time posting here and I seek help to install High Sierra. I have followed the guide made by Stork on https://www.tonymacx86.com/threads/guide-storks-myhero-sierra-installation-asus-rog-maximus-viii-hero-i7-6700k-gtx-980.250824/, because my motherboard is the one above...

I can get into the setup it's always have an prohibited sign.

So I've been trying to install mac to my pc for quite a while now, on and off. I keep getting the prohibited sign after the first installation part (High Sierra installation), and when booting to guide me through the next installation ( The langue part, and etc ) I get the prohibited sign. I got...

Hello! I had a well working hackintosh setup on High Sierra 10.13.4 and as far as I know I did not conduct any update prior to the problem. I have a standard set of kexts installed. The most unusual addition being the hardware sensor kexts for HWmonitor to work. Booting in verbose, safe mode...

I followed the High Sierra guide step by step for installing macOS on my Alienware 17 R3, yet I can't seem to get to the installation screen. I attempted this before almost a year ago with macOS Sierra and got the same result. Any suggestions on how to get my Hackintosh working? USB: 16 GB with...

Hi guys! I'm trying to install MacOS on my pc Specs: Asus Z170P D3 I7 6700K 16Gb @1866MHz DDR3 RX580 8GB When i try to install MacOS ( verbose mode) at about 90% A prohibited sign appears and all neighboring letters are corrupt and I can't see what's wrong. I can use MacOS Sierra without...

My installation of 10.13.1 fails everytime! Have you some collected suggestion for my device? I`m getting crazy! Thanks

Hello, Im a first time hacker but been using apple products since I was in diapers. Been wanting to make a Hackintosh for ever finally got some money to do so. But trying to install Sierra has been a nightmare, spending hours upon hours and staying up till well past midnight trying everything I...

Hey! First time hackintosher here. I've got OS 10.12.4 up and running. Onboard audio and ethernet are working. My MSI GTX 1080 is working after using Clover to install a certain file (I don't remember what it was; something I found on the forum). It goes to sleep and wakes up fine, which is...

Since you are using the Integrated Graphics which I think is Skylake Intel HD 530, I hope you have already taken steps to edit the config.plist to avoid Graphics Glitch you will be facing on install. From your description it looks like the USB port to which your installer is inserted is...

Thank you all to anyone who reads this. I will be so thankful for any help you guys can get me. I have been a lurker for a few years but I have ran into some issues and just can't get through them. Hardware: CPU: Intel Core i7-4790K Processor (8M Cache, up to 4.40 GHz) (BX80646I74790K)...

Hi folks, so I'm getting the prohibited sign when I try to boot up from either the locad HDD or the USB installation disk. I've seen that this error has technically been addressed, but I need a more detailed explanation on what to do step by step, since I don't have a natural knack for these...

Hi i had a good working installation of El Capitan 10.11.5, everything was fine but i had some shutdown issues. So as my hackintosh wouldn´t shut down i figured out that i would like to try the "fix shutdown" in config.plist. I added that through clover Configurator and restarted. After that my...

Everything was working great and I had to go ahead and update :eek: I updated to 10.11.6 from I believe 10.11.3. Unfortunately this has made me get the Prohibited Screen when attempting to start and a OSXAptioFixDrv error. I've read some suggestions but still need some help getting things...

I recently made a fresh new installation of El Capitan to sidestep some longstanding issues, and I've got a real strange one on my hands. Frequently when booting, I'll get the prohibitory symbol after getting through the Clover screen (or the "circle with a line through it") and I'll have to...