post

  1. Jacopopiazza

    NUC8I5BEH - Bluetooth and Audio

    I Installed MacOs Mojave On my NUC8i5BEH following Rehab guide, and I use his scripts to install patches, now it's working good with HDMI Audio... but there are 3 problems: 1)Bluetooth is enabled in the preference panes but won't find any devices... 2)One of the rear USB port isn't working...
  2. BarberousseBinks

    [Solved] GTX 1060 not found in ECC (Nvidia Driver Manager)

    Hello there! It's my first hackintosh which boots well. I've installed macOS Sierra but the nVidia driver does not work properly. In Clover Configurator i have set nvda_drv=1 and disabled nv_disable=1. In my SMBIOS I have a iMac 14,2 (it seems to be the most compatible one) My graphic card is a...
  3. Angelo998

    Audio extremely weak, can barely hear anything

    so, I installed Mac OS on my pc everything works quite well but installing any audio driver makes my audio output extremely weak I can barely hear something from my speakers at max volume I have to stick my ear to one of the speakers to understand words... anyone has a minimal idea on what I...
  4. abaabaabaaba4

    [Solved] gpu red light motherboard and failing to post most of the time

    I have had this system since 2011 and had no problems until recently, a majority of the time when I turn the computer on the red light next to the gpu on the motherboard comes up and theres just a black screen and it doesn't go any further then that. Occasionally it is a cyan or a pink screen. I...
  5. Minicoopergardh

    Post install help!

    Hi so far I been able to install mac os just fine on my pc but havent really been able to figure out exactly what settings to use to be able to boot it without the usb. I also happen to have windows on it already. So if anyone could help me with that I would be really thankful. Preferably with...
  6. dkidd92

    I cannot get my machine to boot without my USB.

    Ok so I did a fresh install using the clover technique of installing Sierra. Everything works perfectly, I used a USB audio for sound, wifi is great, the graphics run smoothly. I just cant get it to boot from the HDD, it only boots with the USB plugged in. I'm certain its something to do with...
  7. Samael00001

    Kernel Panic after successful installation (El Capitan)

    Hi there! I'm not new to Hackintoshing but I ran into a problem.. I've successfully managed to get to Installation screen, everything went smooth. But when I went to load OS from my HDD using my USB and install bootloader and stuff - I saw a Kernel Panic! Why?? All my kexts a still in...
  8. Mete

    Asus H61M-D Core i3 Hackintosh Build Constantly Gives Panic During Post Installation

    Hello there, Firstly I'd like to describe the build properties from here: Mobo: Asus H61M-D CPU: Core i3 Graphics: Integrated HD 2500 I did a successfull installation with UniBeast. Then I started to install Clover Bootloader for the Hard Disk Booting. When I completed the installation of...
  9. Dargenfire

    First Hackintosh build. Clarification needed...

    SO. Tomorrow I am going to assemble my first hackintosh, to be used mainly for video editing etc. But I need to ask some questions because I want to know 100% what I am doing when I install OSX. Here are some (hopefully) helpful specs: CPU - 6700K MOBO - Gigabyte Z170MX Gaming 5 RAM - Kingston...
  10. byouva

    Wifi and battery issue, dsdt or not?

    Hello everybody, I'm new in this forum and new in mackintosh. I have a Toshiba Satellite C855-22N and I have change origin wifi card by a Atheros92855. I install Mac OS 10,9,5 with Unibeast. Then my computer run but without wifi and without battery level. I have try to install with Kext Utility...
  11. cole810

    Stuck at post-installation boot failed to load ACPIEC kext, Sabertooth P67 Build

    Hello! Believe me I've scoured the internet for this same error, but all similar problems happen after installation. After installing with Multibeast (newest version), and trying to reboot through multibeast to my new Yosemite HD I get a consistent error of "failed to load kext...
  12. MIcahTautkus

    After all this time, now long bootup

    Hi everyone, I've had a nice hackintosh running for about 5-7 months now and its had its problems, but works for me. Yesterday morning it gave me a huge heart attack when it wouldn't boot up and the HDD light was solid :shock: Eventually though, if I wait long enough, the OSX loading screen...
  13. Rayx

    Yosemite doesn't boot after install

    (Success)Yosemite doesn't boot after install Hi! I got to the installer of Yosemite and did an installation but now i can't reach Yosemite system (OS) ...(I had Mountain Lion and decided to install Yosemite) I tried this flags: -F -x kernel -v npci=0x2000 maxmem=4096 maxmem=8192...
  14. razzvg

    Question regarding post-install Clover Hackintosh

    Hello there, Been using this Tutorial to get my laptop booting itself to the Desktop so far (thanks alot RehabMan for creating this) Before I come to my question here are my specs: Lenovo Flex 15 59416277: -Intel Core i5 4200U 2x 1.60 GHz -Intel HD Graphics 4400 (IGP) -2x USB 2.0, 1x USB 3.0...
  15. young-blood

    Apple G5 Cinema Display USB Hub Cause of Slow Boot Time to Post

    After completing a build using a Gigabyte Z97MX-GAMING5 motherboard I had a difficult time tracing the source of a 2 to 3 min pause before POST started. Updated BIOS, checked graphics drivers, unplugged everything piece by piece. Finally discovered the USB hub built into my old display from my...
  16. GeoMan2

    Post Mavericks install issue on HP DV7 Laptop

    Post Mavericks install issue on HP DV7 Laptop ** SUCCESSFUL INSTALL ** Hello, I need help with my graphics settings for the latest Mavericks install. Here are my computer specs: HP DV7 4269wm Intel Core i5 M480 2 cores and 4 threads @ 2.66 Ghz (Nahalem - Westmere ) Switchable: ATI...
  17. marcutzsrj

    Post-Install Mavericks Dell 15R 7510

    Hello, I'm new to the world of Mac OS on a laptop and I don't know for sure how to configure it after installation. I'm searched the forum for an answer but didn't manage to find it and that's why I'm posting this thread(if already discussed, please forgive me). I have a Dell 15R 7520 on which...
  18. Pappnase

    Chimera 2.2.1 installation path?

    Hello Yeah, does anybody know where ALL files from chimera 2.2.1 are installed? I need the place where all the files are saved, to delete it. Thanks in advance
  19. sunnydegroote

    My hackintosk on mavericks boots very slow

    Hello, great work all of you, i am really surprised of my old laptop, an hp pavillion dv5, nearly every thing its working, i have some problems, the first one its the boot time, its very slow booting and shooting down. Second i the sleep function wont work. and the less important the card...
  20. Renois

    Installation - Ok! What's next? (kexts, BIOS update...)

    Installation - Ok! What's next? (kexts, BIOS update...) Hi everyone, Just finishing my first hackintosh. :clap: (Thanks) I just need to know, what are the next steps? - Installing kexts? - Updating my BIOS? - Nothing - It's good to go...? I want my hack to be stable but i don't know...
Top