I've set up a system recently and I can't work out why it panics and restarts... I even updated the BIOS to the latest revision and it appeared to work fine for a few days, but I've sat down with it today and it was refusing to boot for awhile...
I've attached an image of the problem...
Just "updated" Mavericks to Yosemite. From the USB it was only running with GraphicsEnabler=Yes, PCIRootUID=1 maxmem=8192 npci=0x2000, only with Graphicsenabler not.
Got Gef GTX570.
I cannot run from the
7. Reboot from the USB and choose your existing drive
with or without bootflags above...
I am a first timer, and i can't get yosemite working on my rig.
Mobo: Gigabyte GA-Z97X-Gaming-5
CPU: Intel i5 4690k
RAM: Kingston HyperX 16gb 1866MHz
GPU: Gigabyte GTX 970 (not connected at the moment).
Storage: Samsung evo 840 250gb and Seagate 2tb harddrive
Hello, i recently tried to switch to clover but im having some issues, after getting the booting to the USB to work i now get a kernel panic unable to find driver for this platform \ACPI\. I think this is because of the config.plist but i dont understand how to make one here are my specs:
[Solved] GA-Z77-D3H ACPI Kernel Panic from Installation Media
Motherboard: Gigabyte GA-Z77X-D3H
CPU: Intel Core i5-3570K
RAM: 4GB G.SKILL Sniper DDR3 @ 1600MHz
GPU: Intel HD 4000 iGPU
My method of installation is OS X 10.10 Yosemite from the Mac App Store which I downloaded from another...
Strange Reboot when opening Photos in Preview. (SOLVED)
I was wondering if anyone has experienced this problem on their systems?
I have my rig all setup perfectly with a DSDT free Gigabyte Motherboard, using Clover and Yosemite 10.10 and everything runs extremely well.., no freezes etc...
Problem w/ Graphics and sound on yosemite
finally i installed Yosemite on my pc (i change my system on profile)
MSI H77MA-G43/ Firmware 1.D0 (last i guess) / Clover v2.3k r3202
Intel Core i5-3330
AMD Gigabyte R9 270
i used clover (Clover v2.3k r3202) but i have 2 problems yet.
Z87 i7-4770k Yosemite 10.10.3 Kernel Panic After Multibeast
I'm new the hackintosh.
I'll start with the important stuff:
ASUS Maximus VI Hero (Intel Z87)
Samsung 830 256gb SSD
Geforce GTX 660 (EVGA)
I can boot the yosemite unibeast no problems at all (with no bootflags)...
[SOLVED]IOUSBFamily did not receive enough extra current for the Super Speed device YOSEMITE
So I updated my Hackintosh today following the update from Mavericks to Yosemite guide. I can only boot to the desktop by using the following flags: -x -F -no-zp
I already had to disable my GTX 760 and...
I used unibeast to install Yosemite on my HP 1000 Notebook PC
It only go to the installer with cpus=1 bootflag
I installed the Yosemite and after that when I'm booting to Yosemite it says that error on the apple logo screen and in Verbose Mode too
Still the same, What do I do?
Hi everyone, I've been getting this text on loading OSX Yosemite, not always, but about 70% of the time this will happen, 30% it will work no problem. I tried changing the boot option to PO instead of UEFI, and that worked perfectly for a while but then it started happening again. I've tried...
This is my first built, I followed Tony's Customac Pro buyers guide and added a corsair h80i cooling unit and tp-link wireless card.
Intel Core i7-4790K
EVGA GeForce GT 740 4GB
Crucial Ballistix Tactical Low Profile 32GB
2 x Samsung 850 EVO 250GB (for...
First, i should tell you, that english isn´t my nativ language!I tried to build my own hackintosh and all worked great with the installation... (there was a panic, but after restarting, it was away...)So all was ok, but after trying to start the PC with the MultiBeast Bootloader it...
So new to the Hackintosh scene, bought a great little unit a Optiplex 755 of ebay. Works great. Problem is that I wanted to upgrade the 350gb hdd to a 120gb SSD.
I googled (a lot) and used Carbon Cloner to copy the main disk onto the USB connected SSD (caddy).
I had used disk utility to...
I've installed mavericks on my laptop using clover, alongside windows 8.1.
but after I installed audio driver from multibeast it started to showing kernel panic error whenever I launch mavericks. :-(
And one more thing, now there is two bootloaders showing in my UEFI list,
one is Windows 8.1...
The story so far. Some time ago I started ordering parts for a new computer. Sometime during that process, I decided that I’d like to try a hackintosh. Actually I’m trying to triple boot, but we can focus on the hackintosh part for the time being. The relevant parts are:
ASUS Z97 Pro...
Going through with a unibeast/Multibeast install of Yosemite and this shows up just after clicking on the usb install drive (before Yosemite install has even loaded).
I've set up my BIOS the same as i've done it before, when i got this install method working.
Help Please? I Don't...
Hi! I'm new in this community.
I'm attempting to install Yosemite in a HP Pavilion dv6-6b02ss. This are the laptop specs:
CPU: Intel Core i7-2670QM de 2,2 GHz
Graphics: (Interchangeable graphics) AMD Radeon HD 6770M
RAM: 8GB (2 x 4 of different brands)
The installation stops when the apple...
Can anyone help me? Not sure where to go from here...
After a few days of reading and trying I finally got a working install of OS X 10.10.2 on my GA-Z97X-UD7/i7-4790k/SSD build using Unibeast USB stick, Multibeast and Chimera. But I couldn't get iMessage and Facetime to work properly so all my...