So in theory everything works kind of fine. After hours and hours of hacking i finally managed to get my GTX 750 Ti working on my friend's hackintosh. I activated "nvda_drv=1" from clover configurator.
There is a problem though:
if i boot by pressing "spacebar" on my SSD and deselecting and...
CORRECTION: CANNOT BOOT WITHOUT NVDA_DRV=1 OR NV_DISABLE=1
I recently just fresh installed El Capitan on my Hackintosh. I was able to go through all of my post-install with Multibeast 8.2.2; however, I cannot boot from clover without inputting either nv_disable=1 or nvda_drv=1. My...
I've recently installed El Capitan onto my PCm these are my specs: Motherboard: Mod 1150 ASUS Z97-A CPU: Intel Core i7 i7-4790K Graphics Card: NVIDIA GTX 970
I've been having some huge problems with the nvidia graphics drivers, at the moment my video output looks very clunky, laggy etc...
Well, that's the thing i can't boot successfully without the flag nv_disable=1
I already try nvda_drv=1 and the new NvidiaWeb Flag but no one can help, if use them get an apple screen stuck at half.
I know my GPU is a little old, but hope some support.
the above system worked great with Yosemite and Clover with native OSX nvidia drivers and "InjectNvidia=1".
I now created a USB drive with Sierra and latest clover and the installation went fine except the GPU (had to use iMac10,1 instead of previous iMac8,1).
I can only get to the...
several days ago i bought a new Gainward GTX 950. I already had OSX 10.11.6 running with a GT 650 so i thought changing the Card shouldn't be a big problem. Well i was wrong.
Every time I try to boot with nvda_drv=1 enabled all I end up, is a black screen and my monitor going...
ASUS Z170 PRO GAMING LGA1151 ATX
Intel i5 6600 3.3GHz
Gigabyte GTX 960 O.C. 4GB
CRUCIAL 2x4GB DDR4 2133
SSD Kingston 240GB
Today through UniBeast I installed Mac OS X El Capitan 10.11.6. All is well, except for the graphics card :( It is determined...
My motherboard is a Gigabyte H67N so I am dealing with the Legacy root Clover installer from this page: http://www.tonymacx86.com/resources/el-capitan-post-install-tools.294/
I updated my 100% working 10.10.5 machine to 10.11.5. Everything is good except that despite having nvda_drv=1 in...
I can't seem to get my GPU to function properly nor is it being recognised by OS X El Capitan, I haven't tried the DVI in the on board graphics but would like to avoid them if possible and get GPU working.
I have used clover to add the flag: nvda_drv=1
When I added the above flag the OS...
This is my first build and have had it successfully running El Cap d/b Win 10 for a week without much issue at all. I followed a guide to fix HDMI audio with SSDT-HDMI-NVIDIA-PEG0.ami file and the system would hang on reboot.
I tried a load of things to fix it but it looks like I have...
Hello to you all and thank you for the time to possibly read over this or help me troubleshoot. I have read many of the other threads and most of them seem to be Kepler based or require the web drivers and that is what I'm hoping to avoid.
I purchased a GT 740 primarily over the 750 as the...
I have had some problems booting my build after I downloaded the newest Nvidia Web Drivers a few days back.
Intel Core i5 4690KEvga
Geforce GTX 960 4GB FTW Gaming
Corsair Vengance Pro 16GB 2400Mhz
EVGA SuperNOVA NEX750B
Cooler Master Seidon 120V...
I've upgraded my system with a SSD, so i had to Reinstall my perfectly working Hackintosh:banghead:. Now i had a Problem with my Nvidia GeForce GT 220. On my last Build i know i Installed the Web Driver an changed the Boot flag and everything works fine. Now after my reinstallation i had a...
[Solved] Boots through USB, Not through UEFI.
Hey Guys, I thought my problems were solved but I was wrong.
I could boot to the UEFI for one day and then something broke. The only thing I did that I can think of would be that I used Migration Assistant to move just my applications from an old...
i have a clean install of el capitan running good,the only thing i need is nvda_drv=1. i already install latest nvidia graphics but i still need nvda_drv=1 at boot. is there any way it can be added and not have to type it every time?. I'm using clover boot loader
At the moment I always have to type (on the boot screen):
If I don't, then my whole system stuffs up because of the nVidia Webdriver.
So how can I add those boot flags into the boot plist? because it says I'm not allowed to edit, then it makes me a copy and in the...
I installed my Gigabyte gtx 750ti using Stork's guide and it mostly went well but I have two new problems now. First the easy one, I added "nvda_drv=1" to the kernel flags in Extra but I think I did it wrong because on the first try rebooting I had a kernel panic. I tried again but added the...
I am trying to install Yosemite over an existing Mavericks installation. I was able to successfully install Yosemite and was able to log into the system using nv_disable=1. After running multibeast, I was only able to log in with nv_disable=1 boot flag. Otherwise, my screen would turn off when...