Howdy Folks,
Running clover with dual boot hackintosh, recently started using a 5 screen setup (overkill I know)
Unfortunately my graphics card (EVGA 1060) only supports 4 monitors
So in order to run all 5 I have one connected to the iGPU (motherboard out) with the other 4 running off the...
Help needed!
Trying to add a third monitor to my setup but when connected (VGA) after initial load the screens go to blackout / standby mode.
Gigabyte z97
Intel i7 4790k
Intel HD4600
I currently use a Dell monitor connected via DVI as my main monitor and a TV monitor mounted to the wall...
Hello,
after updating to Mojave my third monitor stopped working. It isn't seen by MacOS. Better said, the port isn't seen.
I have GTX970, ports:
- HDMI (connected monitor 1 - working)
- DisplayPort 1 (connected monitor 2 - working)
- DisplayPort 2 (connected monitor 3 - not-working)
-...
Hi,
I just got new RX580 today (tired of waiting for the Mojave nVidia web driver).
After install everything seem to works very well.
But I got an issue with display rotation after restart (screenshot below).
I'm using 3 displays (1 vertical, 2 horizontal).
I have no issue back when I use the...
Hi
I have done a ton of reading around, but can't find an answer to my questions and would really hugely appreciate some help/pointers to a couple of issues I have, as I am not very experienced at this at all.
I have had my machine successfully running on Yosemite 10.10.3 for several years...
Hey, I've recently built another hackintosh, and one of the issues I'm having now is trying to get the TV (Secondary display) to be detected for audio, but it's to no avail. I've tried to use all the guides I can get my hands on, and I have all the necessary Kexts. I also have 2 displays, a...
Hello everyone,
So I recently installed a second graphics card(GTX 710). For whatever reason, I cannot get beyond the sign in screen in normal mode. I type the password and the desktop loads but then immediately jumps back to the password screen. Everything works fine if I boot into safe...
Hello everybody,
I have just completed my first hackintosh setup using this exact build : http://snazzylabs.com/article/skylake-mac-mini-hackintosh/ (All the way down to the case).
I'm trying to follow a guide on how to enable multiple displays on this system. The guide can be found here.
How...
Hello guys!
I am having a few issues with MacOS Sierra working on my new machine. Before I get into the issues, let me tell you my build for reference.
Motherboard: ASUS Z170-A
CPU: Intel i7 6700k
GPU: Gigabyte GeForce® GTX 1070 WINDFORCE OC 8G
RAM: 16GB
Storage: 256GB Samsung EVO PRO SSD
I...
Hello,
Specs:
i7 6700k
gtx 970
GA-Z170X-UD5 TH
950 nvme ssd
Configuration:
1080p monitor one in DVI
1080p monitor two in display port (with an hdmi adapter)
4k Hisense h8 TV in hdmi 2.0 port to hdmi 2.0 on the tv
Issue:
The tv won't read a signal if it's detected as native 4k from the...
So... I just finished my Sierra install (10.12.2). Phew! I have multiple monitors but only the one (DVI) actually lights up. The HDMI plugged into my graphics card does not. Neither does the VGA monitor attached to my mobo. The NVIDIA Web Driver refuses to stay toggled in spite of following all...
hey there,
i got a strange failure with my card. When i plug in 2 monitors, i got just 30-bit instead of 32-bit for colours?! If e take one of, it shows up with normal 32-bit. If i install the Nvidia drivers, i got no screen at all.
The Graphicscard is shown up normal in my System.
I changed...
Specs:
CPU: Skylake i7 6700k 4.0Ghz
MB: Gigabyte H170N wifi
GPU: Intel HD 530 integrated graphics
Memory: Crucial 16gb DDR4
Storage: Crucial 525gb SSD
Monitors: 2 x Asus VS247 23.5in.
Everything is up and running smoothly except my duel monitor setup. For some reason it's only reading one of my...
Specs:
CPU: Skylake i7 6700k 4.0Ghz
MB: Gigabyte H170N wifi
GPU: Intel HD 530 integrated graphics
Memory: Crucial 16gb DDR4
Storage: Crucial 525gb SSD
Monitors: 2 x Asus VS247 23.5in.
Everything is up and running smoothly except my duel monitor setup. For some reason it's only reading one of my...
Hello.
I'm using a notebook with Yosemite and want to use two external displays at home.
To my sorry the notebook has just one HDMI output which I guess is very common.
It also provides 3 USB 3.0 Ports and so I'm looking forward to buy an external graphic card.
I couldn't find a lot of...
Ok this is my first hackintosh so I have almost no clue what I am doing. I didn't pick any of my hardware to run OS X specifically I just happen to notice one day that it was capable of working with OS X.
My problem is I have 3 monitors
asus pb287Q dp1.2
asus vs247 HDMI 1.4
asus vs247 DVI
and...
Hi there,
I don't know if other users already posted same questions on other threads.
I searched about it but I couldn't t find any results.
The questions are:
running OsX and using the integrated HD530 video card (inside the i7 6700 or i7 6700k CPUs) will I be able to use more than one display...
Hi,
I'm new to this forum, but I installed yosemite earlier in the week on my system after many many different configurations from the unibeast installer. I am using the latest nvidia web drivers. I have 3 screens, one running from displayport (using converter to vga), one running through HDMI...
My specs:
MacPro 1,1 (with 2,1 Firmware hack)
x5355 x 2
16GB RAM
MSI Nvidia GeForce 630GT =http://www.msi.com/product/vga/N630GT-MD2GD3.html
My problem:
Recently installed mountain lion using Jabbawok's chameleon boot loader method.
Working absolutely perfect APART from 1 thing:
I can only...
First the setup:
Board: P8Z68-V Pro (Haven't updated to the 1101 bios yet)
Processor: i7-2600k
Graphics: XFX Radeon 6870 HD (2x DVI, 1x HDMI, 2x Mini DisplayPort).
OS: Lion 10.7.4
At the moment I'm running flawlessly with 2 screens (2 LG's) with one hooked up to DVI and the other to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.