1. dinz14

    USB-C drive never mounts on boot...

    Hi all, quick question - is there an easy fix for this? My portable 'work' drive, which is a USB-C SSD, never mounts on boot. It mounts fine once I unplug it and re-plug it after my hack has booted. I'm worried about damaging my usb-c i/o port with the daily unplug/plug routine. Am I worrying...
  2. A.Tony

    How do i find out which SSDT my Hackintosh is using?

    When i did my Hackintosh several months ago i had multiple SSDT files and now i dont know which one is the right one, how can i find out which the correct one is? Thanks in advance :)
  3. ByKiwito

    Non-mounting disk

    Hello everyone! I've got a Hackintosh for 2 days with i7 4770k, 16GB DDR3 1866 kingston, nvidia GeForce gtx 1050 2GB and a KINGSTON UV500 240GB SSD disk. The problem appears when the hackintosh don't mount the disk and is not recognised by clover bootloader. What I must do?
  4. papadiche

    Toggle VoodooHDA + Mount EFI

    Hi all, I'm sure no one will need these scripts but I built them and thought I'd share. For each file, remove .txt and run the following command in Terminal: sudo chmod u+x <path of script file> Toggle VoodooHDA: > Mounts your macOS EFI > Checks if VoodooHDA.kext is in...
  5. AlexGrozX

    Solved > Guys HELP. Restore EFI partition dual boot windows.

    Hello I broke my system. I have an EFI backup. But I cannot load in to Mac OS. When I connect my USB boot drive it causes a kernel panic and I can't even boot in to (clover boot loader). I can boot only to my Windows 10 (dual boot). I use (Mac Drive 10) to access my Mac OS drives. But how can i...
  6. dudio

    Unable to mount recovery partition, High Sierra will not boot

    After months of running High Sierra, Windows 7, and Linux on my machine, my OS X install suddenly refuses to boot. When I boot in verbose mode I can see the system trying to mount Disk3s3, stating that it's unreadable, unmounting it, and then just hanging indefinitely. I am still able to boot...
  7. Peskyleo

    [SOLVED] Kernel Panic. How do i change config.plist in safe mode?

    The computer was turning on and off perfectly several times before installing "100/200/300 Series Audio Support". Now it can't boot anymore. Its going into kernel panic. The description for "100 [...] Support" on multibeast reads: "Required for 100 / 200 / 300 Series onboard audio. Must be...
  8. aronklaskjd

    help can't mount efi

    hi I am a first timer and I have a problem mounting clover config I pre mount efi and it doesn't do any thing .efi mounter 3 says Finder got an error: AppleEvent handler failed. (-10000) efi mounter v2 says mkdir: /Volumes/EFI: Permission denied (1) when I mount in console says...
  9. lavavex

    Apple Bootcamp HFS Read Only Windows Drivers

    Hi fellow Hackintoshers! I have created a simple script that will install the Apple HFS Read Only drivers from Bootcamp on any Windows PC! This script is the effort of an hour of just googling stuff and copy pasting commands with minimal edits (Cause I'm Lazy) but should work on any computer...
  10. susudio

    .dmg files will not mount or mount with different (existing)name, sometimes (Error code-reddit quote

    I saw an issue report in Reddit as below and it seems not only I have this issue occasionally, although restart can give you a fresh mountingplatfpfm, we wonder if there is any tool or terminal command to have it fixed as well...
  11. acarterg

    [Solved] UniBeast Creating "Install macOS High Sierra" and "EFI"

    Hello! Long story short; I didn't maintain my hackintosh and am now attempting to start over completely. I've reformatted drives and am ready for a clean start. When I go through the steps to create my bootable drive, UniBeast renames the USB to two drives "Install macOS High Sierra" and "EFI"...
  12. Einzbern

    Can't Mount NTFS drives after Windows 10 Installation.

    Hi there. Before installing windows, I had the following. 1. Samsung SSD 840 EVO 128GB - This drive runs OS Sierra 10.12.6 2. Toshiba 1 TB - This is used as Storage drive (It is in NTFS Format) Everything worked fine with ParagonNTFS. My Storage drive worked just fine. Recently, I bought a...
  13. felixmayr

    (HELP) Error Boot: cannot mount root, errno = 19

    X99 Dual Boot System running MacOS Sierra 10.12.5 Drive is working and Partition is active. The PC has been working until now.
  14. clabella608

    [Solved] El Capitan Boot Loop after Migration Assistant

    Installed El Capitan and it was working fine, then I used migration assistant to import all the data from my old boot drive. It must have brought a bunch of unnecessary Kexts with it, because after restart it was stuck in a boot loop. Tried running the boot arg cpus=1 and it still was in a...
  15. Kurdology

    [Solved] Cant mount efi

    hello when I try to use clover configurator I can't press mount. Also mounter v2 and v3 don't work. When I try to to it per terminal it gives me this . HackintoshsiMac:~ hackintosh$ mkdir /Volumes/EFI && sudo mount_msdos /dev/disk3s1 /Volumes/EFI mkdir: /Volumes/EFI: Permission denied...
  16. kextinstallerplease

    Some but not all USB 3.0 ports on my motherboard suddenly claim not to be able to provide power

    CPU | Intel core i7 6700 3.4Ghz Mobo | Gigabyte H170-D3hp Ram | Corsair Vengeance 16GB (2x8GB) 2133Mhz GPU | Galax GTX970 4GB SSD | Samsung 850 Evo 500GB PSU | Thermaltake 600w OS | 10.11.6 I initially thought this issue was a blown port and while it still could be hardware I've noticed...
  17. dkidd92

    I cannot get my machine to boot without my USB.

    Ok so I did a fresh install using the clover technique of installing Sierra. Everything works perfectly, I used a USB audio for sound, wifi is great, the graphics run smoothly. I just cant get it to boot from the HDD, it only boots with the USB plugged in. I'm certain its something to do with...
  18. MrOptimistic16

    Prohibited sign on boot up

    Hey guys my hackintosh is working fine for almost 3 months until this morning, i boot it up then stuck with prohibited sign on it, try to use verbose mode and it's giving me this kind of error cannot mount root, errno = 19 take note that i didn't do anything with my hackintosh i just normally...
  19. speeding_ant

    AutoMounter - Keep network shares mounted

    Introducing AutoMounter, a powerful menu item designed to automatically mount your network shares. We wanted our network shares always accessible and ready to use. If you've got a NAS appliance, a server at work, or even shared folders on your other computers, you'll know how time consuming it...
  20. tonyloco

    [Solved] Clover can't mount EFI

    Hi there, I'm using Sierra GM normally, but I noticed that Clover can't mount EFI. Does anyone get this problem?