macbook pro

  1. TriFlixFilms

    I'm desperate... MacBook Pro/eGPU/Compact Hackintosh?

    My only use for OS X is Final Cut Pro, I need help picking the best route... 1. 13" MBP priced at $1630 16gb ram, 256gb SSD, 2.3 GHz dual-core (boost to 3.6GHz). I would also purchase the $600 AMD 580 eGPU (just plug in the TB3 port)...
  2. HunterCrafter1

    R7 260x support in Sierra

    Need help getting a R7 260x running in Sierra on a macbook pro with an eGPU set up, i know my system works with my GTX780TI but i cant for the life of me get this amd card to work, checked the AMDRadeonX4000.kext AMDController8000.kext's and they both have the needed device id "0x66581002" usd...
  3. pgee70

    permanently disable discrete graphics on MBP

    My trusty 2011 mbp discrete graphics chip has died. It wouldn't boot- just gets to a point in the boot and shows bad lines on the screen and hangs. It even hangs on a USB recovery disk so it isn't the internal drive/settings. I put the mbp into target disk mode and moved...
  4. maxdjr

    Intell 600p as boot drive in Macbook Pro

    Hey everyone, I've had a thread on MacRumours for the last few days trying to figure out whether I would be able to use an M.2 PCIe SSD in a late 2013 MacBook Pro as a boot drive and also benefit from NVMe performance, and it turns out that there are only a few SSD's that work with each...
  5. neednewpc123

    Trying to save my Macbook Pro hard drive! Any help is appreciated!

    Motherboard: Gigabyte GA-H170-Gaming 3 CPU: Core i5-6400 Graphics Card: EVGA GeForce GTX 750 Ti RAM: Crucial 16GB kit (8GBx2) DDR4 2133 My mid-2010 Macbook Pro's logic board kicked the bucket a month ago, so when I found out that nothing could be done to save it, I decided to build a...
  6. IkeaEraser

    Samsung 850 Evo gives problems on MBP

    I have Windows 10 installed on an Samsung 850 Evo 500GB. It is on an external ssd enclosure and is connected to my MacBook Pro 2014 via USB. For some reason, within a minute of booting and logging into my account, I will get a blue screen that says there is an error. However, when connected to...
  7. vgmoose

    Hackintosh Build inside an existing Apple Macbook Pro?

    I have an old Apple 2009 Macbook Pro. I like this machine a lot, and have upgraded the hard drive and ram, replaced the battery, and switched out the dvd drive for another hard drive. The only thing that can't be upgraded is the CPU, so it's still rockin' the Intel Core 2 Duo processor. Thing is...
  8. IkeaEraser

    MBP mid 2014 storage upgrade

    I suppose this question has been asked many times before, but I couldn't find any threads that could conclusively help me. Do pardon if they do exists and kindly link me. I'm looking to upgrade my 13" mid 2014 storage from 256 to 512( or 480/500). iFixIt's guide doesn't provide details of the...
  9. tabarus

    New MacBook Pro - Good Sign for the Hackintosh Community

    "The MacBook Pro is aimed at professionals in the industry who need computing power," Hm , some professional want more than 16 GB RAM
  10. PaladineUK

    New MacBook Pro?

    Anyone got the new MacBook Pro yet? I have been very lucky and a client of mine is buying me one for my birthday - it should be ordered today and I should have it in about 4-5 weeks according to Apple's web site. I will be getting the 15" 2.7GHz i7, 512GB SSD and Radeon Pro 460 GPU - have to...
  11. conradolpz

    IT'S COMING - HD 530 fix by PikerAlpha

    I don't know wether it can be useful or not.. but I extracted it from a MacBook Pro 13,1, the only one available in the Apple Store, here in Barcelona. Is it possible to extract some info from it, or learn something from it? UPDATE: It seems like user PikerAlpha managed to understand more...
  12. Friso

    Multiple OS X on multiple SSD drives Hackintosh

    Hi everyone, I recently moved my Hackintosh to a new shared workspace. Me and my co-workers are looking to share this machine. We all would like to use our own installations of OS X and run them in parallel. (just to be clear: for specific reasons we don't want to have multiple users). Our...
  13. senor_coconut

    Successful Install: El Capitan on MacBook Pro 3,1 Mid/Late 2007 2.4GHz (A1229)

    Just for information since I could not find feedback on this: I successfully installed El Capitan on a Mid/Late 2007, 2.4GHz MacBook Pro 3,1 (full specs here). Everything seems to work out of the box although I didn't perform extensive testing. I just followed the standard installation steps...
  14. dopethescope

    El Capitan Installer for older MBP

    I am running 10.7.5 on an older macbookpro that is not compatible with El Capitan. So even though I am eligible for the free download it won't download - I get an error message. How can I get the 10.11 installer to be able to create my USB using UniBeast?
  15. dopethescope

    Older Mac - El Capitan Installer

    I am running 10.7.5 on an older macbookpro that is not compatible with El Capitan. So even though I am eligible for the free download I wont download. How can I get the 10.11 install to be able to create my USB using UniBeast?
  16. dreinz

    Building an Hackintosh from a OS X Clone.

    Hi folks, i'm taking seriously to build an Hackintosh for Christmas, so i would like to know if it's possible to build the entire PC and just boot from my OS X Clone Backup instead installing OS X from scratch? I actually have a Macbook Pro Retina 15" 2013. Thanks! :mrgreen:
  17. Hazzer

    Should I get a 2012 or 2013 iMac to use as a display?

    Hi all, I'm looking at buying a 2012/2013 iMac to use as a display and am unsure which model of buying, most likely a 21.5" version. I've been looking around and seems to be little price difference between a 2.7Ghz, with Iris graphics low end 2012 and a 2.9Ghz 750m high end 2013 model...
  18. beelzebozo

    Intel 10 nm Cannonlake Processors to be Released in 2017

    Intel will launch its 7th generation "Cannonlake" processors next year after the release of the third "Kaby Lake" processors built on the current 14 nm silicon fabrication process. The die shrinking will continue with 10 nm "Icelake", followed by "Tigerlake" and is expected to reach 5 nm by...
  19. japmeet

    Need help with Ethernet controller after yosemite upgrade (Macbook pro 7.1, 2.66Ghz)

    Hi, a few months back I upgraded my macook pro 7.1, 2.66ghz, to yosemite via the app store update thing installation (I made a bootable USB and formatted the hard drive and installed yosemite fresh) Ever since then my ethernet has stopped working. Network panel under settings doesn't show...
  20. Kornee

    Boot problems on Fusion Drive

    Hi there, Recently I installed a WD Black 2 dual drive in my early 2011 Macbook Pro. I've managed to make a fusion drive out of it, and it's doing everything I expected from it. The only problem is that intermittently, my mac won't boot all the way. It will get stuck at the loading screen you...
Top