m.2 adapter

  1. mgregrs

    ASUS Hyper M.2 X16 Card V2

    Hi All! After little research (everywhere), I couldn't find any information about working ASUS Hyper M.2 V1 or V2 card. on HS or Mojave, so I bought one, to try it and share my experience. 1) Main idea 2) Quick presentation 3) Quick performance test 4) BIOS configuration - 4a) Data mode - 4b)...
  2. Ghostmac1969

    Help - SSD PCIe 3.0 expansion cards

    Hi, I'm planning to build an Hackintosh x299 based and I was wondering if I can use one SSD PCIe 3.0 expansion card to build a RAID 0 system disk like one of there: - ASRock Ultra Quad M.2 Card - M.2 XPANDER-AERO - ... Tks a lot in advance
  3. tc92

    M.2 to PCIe x1 for ITX Motherboard

    So this is kind of out there but I’m hoping someone might be able to help me out. I purchased an interesting adapter: M.2 to PCIe x1. I did this so that I could use my Fenvi T919 as my motherboard is an ITX and only has one PCIe x16. The problem, however, is that I am unable to boot into...
  4. N8261D

    m.2 WiFi/BT to PCI-e x1 adaptor

    I have the DW1830 (natively supported on macOS) which uses the m.2 interface, but I need an adaptor to put it into a PCI-e x1 slot. I have found some adaptors, but they don't seem to make the Bluetooth work WITH the WiFi. I would like to have WiFi and bluetooth, so if anybody knows of a good...
  5. ivaylo.nikolov

    M.2 WiFi / Bluetooth card

    Please advise which card to buy. I have a Gigabyte GA-Z270N Gaming 5 motherboard with M.2 port. I.
  6. Kafke

    Best/smartest solution for second m.2

    My hack is running smoothly for a while now, but for video editing I'd like a second nvme drive, but my MB has only one m.2 port. (z170 designare). I found different solutions via a pci e adapter or even the all in one solutions from ocz/toshiba. - Toshiba rd400 - Angelbird PX1 card to plug...
  7. jhenu

    COMFAST CF-912AC 1.2Mbps USB3.0 Working with macOS Seirra 10.12.3

    Dear All, If you are building Hackintosh probably you know the pain in the arse to make M.2/NGFF Cards to make it work!!!! Here I present the USB3.0 1.2Mbps Dual Band USB3.0 Wireless Adapter works flawlessly with Hackintosh/macOS Product Information...
  8. rikk08

    Thoughts on First Hackintosh for Video Editing (PP) + Help on M.2/PCIE SSD

    Hi all, I've built my own 'gaming' pc years ago which is running very slow now and I'd like to build a Hackintosh for the main purpose of video editing on Premiere Pro (I don't do gaming). Budget is up to 1.2k EUR. I don't care much about render times as long as my machine will handle 4k...
  9. Tosol

    GA-Z170Z-UD3 WiFi module Broadcom into M.2 slot

    Hello, guys! I have motherboard GA-Z170Z-UD3, is fully working with Sierra OS X Also it have two slots PCIe Gen3 x4 M.2 1-st I used as SSD and have 2-nd free. How do you think, if I will connect msata wifi module from apple mac book to M.2 through the adapter as in the photo, Can I lose my...
  10. maxdjr

    Intell 600p as boot drive in Macbook Pro

    Hey everyone, I've had a thread on MacRumours for the last few days trying to figure out whether I would be able to use an M.2 PCIe SSD in a late 2013 MacBook Pro as a boot drive and also benefit from NVMe performance, and it turns out that there are only a few SSD's that work with each...
  11. danmcq

    [SUCCESS] Booting 950 Pro NVMe on GA‑Z77X‑UP5 TH

    I wanted to share how I was able to get my Z77 system (Gigabyte GA‑Z77X‑UP5 TH motherboard) to successfully boot off of a Samsung 950 Pro NVMe SSD using a PCI Express adapter. I know there are several others using this same motherboard for their builds, so hopefully someone will find this...
  12. Karl-Hungus

    GA-Z97-D3H... m.2 pcie 3.0 adapter for OS boot possible?

    hey guys first off thanks so much for all the support. I built a 'tosh everything turned out great (GA-Z97-D3H, 32gb ram, 4.0 i7, GTX 970) basically I should have done more research because I would like to be booting my OS off an M.2 SSD. this is not possible as my board has no built in...
Top