kernel error

SPECS: GA x99-phoenix sli intel i7 5820k gtx 1070 trying to install high Sierra, it crashes instantly with a kernel panic. any suggestions? I followed this guide: https://www.tonymacx86.com/threads/success-i7-5820k-gtx-970-ga-x99-ud4-high-sierra-10-13-clover-guide-100-working.240052/

I followed the guide for catalina with unibeast and After the 1 st kernel panic, i found the EFI folder ( for My pc) on GitHub, but it doesn’t work... what can i do? My pc is an Hp pavilion 15-cx0012nl CPU=Intel i7 8750H IGPU=Intel Uhd630 DGPU= GTX1050Ti. Sorry for My english

Good afternoon, I have been on this for a couple of days now. I have an ASUS n56JR-EH71 Laptop with an i7 4700HQ, GTX 760m, 16GB ram, 250GB SSD. I have installed Catalina for the 5th time with no hiccups, just takes a little time to boot but, every time I successfully install and setup my macOS...

I have the same problem as Ben42 had (https://www.tonymacx86.com/threads/catalina-10-15-6-prelinked-kernel-boot-error.301561/) My system is: i9 9900K GIGABYTE Z390 UD GIGABYTE RADEON RX 5500 XT 32GB DDR4 3200MHz Kingston (now running at default 2400) SAMSUNG 970 Pro NVMe M.2 I've used...

Hey guys, So I’ve been out of the game for awhile after I had a drive crash and just started living off my laptop. Now I’m back and trying to get my build working again, and I just can’t seem to get things up and running. So I started with a fresh Snow Leopard install using iBoot and Retail CD...

I just updated to Catalina from Mojave and after upgrading clover as well as the kexts I was not able to boot again into my system. I am running on a Dell latitude 7480 with 7thGen i7 and 620UHD Graphics The error is a kernel panic in the Kabylake graphic driver and no matter what I did, I...

Hello :), i'm new in the forum and i need help for a kernel panic that appears when i boot from the installation USB, and i can't reach the installation UI. It appears after about 30 seconds, but i don't know how to understand it (the error should be a cpu error, it seems). The version of Mac OS...

I tried to move from a working FakeSMC install to VirtualSMC by replacing driver and kexts in Clover on HDD EFI boot partition. That didn't work out well and now I'm stuck with busy timeout, (60s): `AppleACPICPU` So I'm booting with the bootable USB media with Clover created during...

Hi There I had a working Catalina build and recently updated Clover to 5100. Upon rebooting I get the following error: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ KernelToPatch: Enabled: Found bootArgs2 at 0x07EE0000, DevTree at 0 bootArgs2->CommandLine = dart=0 -v...

Hey guys, I got a DisplayPort problem, external monitor works fine until I unplug the miniDP cable, then the internal screen turns to black immediately, only the backlight left. But kernel still running, I run gen_debug through my phone After that, when I shut down, kernel hanged, I have to cut...

Notebook model:Thinkpad T460P CPU:i5-6440HQ Core display:HD530 BIOS settings Secure Boot--->Disabled UEFI/Legacy BOOT--->UEFI Only CSM Support--->No Attachment is my EFI file Error:

Hello everyone, I had a panic while booting the macOS Sierra installer: ACPI Error: ... ACPI Error: ... ACPI Warning :: Fail Kernel Panic on Startup: \ "iMac14,2 \" ... / IOPlatformExpert.cpp: line 1667 I do not have any version of macOS installed. I hope that someone can help.

Hey guys! I just set up my second Hackintosh build. Unfortunately my Mac randomly crashes without me being able to reproduce the error. My specs are: GA-Z97X-UD3H-BK | i7 5775C | Radeon HD 7870 Following you find the Panic Report: Anonymous UUID: 428737D9-C1EA-21E3-40FA-206DA0E256C0...

Hi guys, Having trouble identifying the cause of the issue, when I select boot macOS install from Install macOS High Sierra it loads gets to about halfway and reboots the computer. BIOS - VT-d = disabled - No CFG-Lock in BIOS - No Secure Boot Mode in BIOS - No Option to Set OS Mode - No IO...

Hi, Since I've updated to high sierra I've problems of any some kind. For some time I could boot the system, everything worked ok, with the exception of sound and sleep. Now I'm back to point 0. I can't boot. TO be honest I don't know what was changed since then, the only thing I've done...

Hi, I'm following this guide. https://www.tonymacx86.com/threads/unibeast-install-macos-sierra-on-any-supported-intel-based-pc.200564/ When i boot from the USB and i choose Clover, the Apple Logo appears and it starts loading, but after few seconds, the Screen shows this (see image attached)...

Hello everyone, yesterday I upgrade to Sierra from Yosemite (two years with Yosemite and perfect) everything working fine! I was working all the day without any issues, I restarted a couple of times just for Check and all was ok. Buuuut I downloaded Clover Configurator because I saw that you can...

Hello, I'm trying to booting Sierra on my HP Pavilion DV6 3320el, but I get the following message: I've followed RehabMan guide and created the usb with a real pc (the same in the photo with mavericks installed). Tried to use different config.plist taken always from the guide, tried the FakeID...

Hey guys I had to update itunes the other day on my ASUS P8Z68-V LX based Yosemite system. Generally it's run well for ages now but of course doing this messed up the audio setup as we all look forward to after updates like this. Anyway, I've screwed it up somehow with trying to clear out the...

I'm attempting a new installation, using a unibeast created flash drive. I managed to get through installation, but then on rebooting I started getting this error - I get the error booting into my installation, and on booting into the install - so I can't get anywhere. Haven't managed to find a...