Hi, I need help with my setup. I can't shut down/restarting/log out. The problem is, whatever option I choose the screen goes black and the only thing I can see is the mouse pointer. I can move the mouse but this process stays likes that until I press the shutdown or restart button.
I tried to...
I finally trade my GTX 980ti for a RX 580 because the tweak for using the High Sierra Web Drivers on Mojave without acceleration is not anymore acceptable. So I'm now on macOS 10.14.2, but there's several problems I don't know how to solve.
1. I've to connect my display with HDMI...
I am attempting to build a Hackintosh geared towards Music Production on the osX platform (using Logic Pro X and/or Presonos Studio One). I am debating if its a wise idea to simply install the osX on my existing PC, instead of building a entirely new system (since there is a...
Ok so this is my build :
1. i7 4790k
2. Asus Z97 A
3. Asus Ati Radeon 7900 Series DirectCu II
4. SSD Samsung 500 GB
5. 16GB Ram Corsair Dominator
Do you think this build is good for High Sierra? Do you have some advices for me that i should consider? Thank you!
This might be a dumb question, if so, the answer should be fairly quick and simple. I want to update the Hardware on my "Mac Pro" [SEE SIGNATURE - 1ST BUILD]. Can the EVGA GTX 1060 work on the Gigabyte z97x series motherboards?
i found this forum and very happy with it, althogh its going to make me big headache for the weekend :banghead:
my current hardware is:
Motherboard: gigabyte z97n gaming 5 mini itx
Processor: Intel i7 4790k
Graphic Card: Nvidia MSI gtx 980
SSD: Samsung evo 850 500gb
Hi. I have a very hard time getting a perfect boot load with sierra, installing it or after installation getting to desktop. Is it a graphics card or motherboard issue? I have a GTX 1060, i7 4790K, Maximus formula VII Z97 motherboard.
Sierra 10.12.5 works (Graphics accelerated, audio and USBs working) but still need cpus=4 to not getting restarted after minutes of using the hackintosh. EFI Folder attached.
I search for other similar threads but are old and relative to Mavericks and El Capitan. Also don´t know how to...
I had a hackintosh working on El Capitan with this plus my signature info:
Samsung 850 EVO 500GB 2.5-Inch SATA III Internal SSD (MZ-75E500B/AM)
Samsung 28-Inch Ultra High Definition LED Monitor (U28D590D)
Crucial Ballistix Tactical 32GB Kit (8GBx4) DDR3
Graphics (now dead)...
Hello everyone, I've been looking for a solution on the Internet for weeks, I'm still not sure the reason for my problem. My last hackintosh had the El Capitan OS and now Sierra, it always worked perfectly, totally stable. These are the characteristics:
Mobo: GA Z97X UD3H
CPU: i7 4790K - 4ghz...
I recently made the upgrade from Yosemite 10.10.3 to Sierra 10.12.4.
After many hours of tinkering with Clover, I finally have everything working and the machine is even more solid and reliable than before.
However, It will only successfully boot every few tries (3 - 6 attempts)
Motherboard: GIGABYTE GA-Z97X-GAMING 3 REV 1.0
Micro: INTEL I7 4790K
Graphics: MSI GTX 970
RAM: KINGSTONE HIPER X 8GB
SSD: OCZ 240 GB
WI-FI: TO BE DETERMINED
So here i am. 4 years ago i had an AMD based PC and tried (unsuccesfully of course) to install macOS on that one. Since last year i had...
Hi. Before all, i am a newbie, cero experience in coding, programming whatsoever stuff regarding any language other than spanish and a little english
I want to install MacOS sierra on my PC. This is my setup
Mother: Gigabyte GA-Z97x-Gaming 3 Rev 1.0
Micro: Intel i7 4th gen 4790k
Sorry about my poor english first.
Then I have to thank you for all your help here in tonymacx86.com. Without your wonderful work, I cannot make it in such a short time. Right now, I'm writing this post with perfect working Hackintosh runing OS X 10.12 Sierra. I build it just...
So, I bought a custom PC. Wasn't considering Hickintoshing it at the time. Now I am. Just hoping it's close enough that I might only have to change a thing or 2. Looking this up myself and mostly asking for confirmation on stuff I couldn't find. Thanks for any help :)
I want to use the Windows...
For the past two weeks i've been trying to get native power management working on my Clover setup on 10.11.6. The main problem is that anytime I apply the SSDT to the patches folder. My idle speed will not keep stable. Without the SSDT, My idle sits comfortably at 0.8GHz with the odd jump every...
[SOLVED] Post MultiBeast Kernel Panic
If there is anyone here who can advise me on how to begin resolving the kernel panic detailed below I would be enormously grateful. I am new to Hackintoshing so please forgive any ignorance regarding this issue.
Background--I recently built a computer...
My long term hackintosh built (2007-2014) suddenly died. It was working well from OS X 9 to 10.9 with - Core2Q 6600, Asus P5K deluxe wifi, (recently upgraded) asus gtx 550ti 1gb, 6GBDDR2 RAM, corsairVS650 PSU and a cooler master HAF920 adv. case. Seems like a problem with mobo or CPU - gone for...
[SUCCESS] “Hac Pro” Asus z97 Sabertooth mark II, i7 4790k, xfx AMD 280x
ricky7's Build: Asus Z97 Sabertooth Mark II - i7-4790K - XFX R9 280X
Asus Z97 Sabertooth Mark II USB 3.1 Motherboard
Intel Core i7-4790K Processor
XFX Double Dissipation AMD 280X Boost Graphics Card
I would like to know if my pc is compatible to install El Capitan and what problems can occur.
My specs :
ASUSTeK COMPUTER INC. MAXIMUS VII RANGER (SOCKET 1150)
Intel Core i7 4790K @ 4.00GHz
HyperX Savage 16 GB (2 x 8 GB) 2400 MHz DDR3 CL11 DIMM XMP