i7 2600k

  1. EthanSnakeman

    Odd issue with RX 580. Only get video after sleep/wake

    Hey everyone. Just completed my Catalina mackintosh build. Everything works great apart from one small issue. When booting the system, it starts to a black screen when using the separate GPU. In order to get a video signal I have to first allow the system to sleep. Once it wakes up everything...
  2. Leo037

    Problem with High Sierra installation MSI Board

    Hi all, If someone can help it will be great ! I have a problem with the installation of High Sierra on a MSI P67A-C45 MotherBoard with i7-2600k The installation freeze on the Apple Logo and no progress bar appears... Any ideas ? Thanks Léo
  3. justroger

    Can I install hackintosh on my pc?

    Hi, my pc has an AsRock z68 Pro3, an i7 2600k and a GTX 560Ti 1GB. Is High Sierra (or older) compatible?
  4. kengg2011

    Installer

    Hi all, I have tried to install High Sierra and the installer wouldn't pass the apple screen to install High Sierra. Is there anyone who would be willing to make me an installer for High Sierra? It would be appreciated Thanks. Gear: Intel core i7 2600k HP factory motherboard Crucial SSD I...
  5. KaySWS

    [Success] Sierra 10.12.2, MSI P67A-G45, Intel i7 2600K, nVidia GTX285, 8GB

    KaySWS' Build: Sierra 10.12.2, MSI P67A-G45, Intel i7 2600K, nVidia GTX285, 8GB Note: this is NOT a new build, so the components might seem a bit outdated I'm sharing this build to show that it goes really well with Sierra! Components Intel Core i7 2600K Processor...
  6. Gaurav Verma

    SUCCESS: Mavericks 10.9.4 on Intel DH67CL

    SUCCESS installing Mavericks on Intel DH67CL Hi everybody, When I bought my system, I didn't think of installing Hackintosh on it but I successfully installed "Mavericks 10.9.4" on my PC few weeks back. Hopefully the same should work with Intel DH67BL coz it is same board like DH67CL...
  7. kiganazil

    [Problems] Asus P8Z77-V Deluxe

    Need help with post-instalation This is my first atempt at doing a OS X install on a PC so I try to install OS X Mavericks 10.9.4 using the UniBeast + MultiBeast method and I have issues in post-install...don't know what to install for my board Hardware : Case : Aerocool XPredator White...
  8. 7maniAlkhalaf

    i7 2600k OCed to 4.3, 10.9 shows 3.4 only

    Hello guys, so I did a nice install on my system P8z77-v lk, i7 2600k, GTX 670, 8GB Mushkin. Everything is fine for me except sleep and speedstep as my cpu remains at 3.4GHz, On system info it shows 3.4 and on hw monitor it's x34 which is 3.4, and that's all the time. It is overclocked to 4.3...
  9. conelso

    Geforce GTX 260 DDR 896 on 10.9 Mavericks

    Geforce GTX 260 DDR 896MB With p8p67 Pro i7 2600k on 10.9 Mavericks Hello, I have just managed to install 10.9 Mavericks and managed to start up . Started reading about Hackintosh last week a little and sat today and installed 10.9 Mavericks on one of my disks ! First attempt everything went...
  10. molusc

    Cannot boot without safe mode and GraphicsEnabler=No

    Please help ive been looking around all the forums i can find and i get nowhere. My first problem is that even after multibeast i am not able to boot from the hard drive, it gives an error that says boot0 and many wierd symbols so then i boot from the usb with unibeast and if i just do...
  11. woutwoot

    Will this work? P8Z68-V PRO - i7-2600K - HD 7950

    My system: MotherBoard: ASUS P8Z68-V PRO Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Memory: 16GB DDR3 GPU: AMD Radeon HD 7950 Using 3 screens, 1 connected using displayport, 2 using DVI) HDD: Intel 80GB SSD Now I ask you guys, is this hackintoshable? I've managed to get this setup...
  12. melle721

    Can't install Mountain Lion..

    Hello, i have tried to install Mountain Lion on my PC: i7 2600k Gigabyte GA-Z68XP-UD3 Radeon HD 7870 500GB 7200.12 and 2000GB 7200.14 Seagate Barracuda HD 8GB 1600 RAM Well, now i have bought Mountain Lion over my Mac Book Pro, did all the stuff with UniBeast, took my GPU out of my PC...
  13. tonicatcan

    Can't install on a PC (i7 2600k)

    Hello everyone, I've been trying to install OSx 10.6.3 through my pc. I have an ASUS p67 sabertooth motherboard with 8GB ram installed. An intel i7 2600k CPU and i'm using a nvida 560ti. When booting it seems ok, iBoot, but then when I switch the dvd to the snow leopard it doesn't do anything...
  14. Beowulff

    GA-Z77X-UD5H + i7 2600K + ML - 1/2 performance until after wake!!!

    I noticed a very odd thing recently. I was attempting to overclock my i7, (just using the turbo boost settings), so I ran GeekBench before I did any changes, and got a result of around 11,000. After I made the changes, I re-tested, and got something abound 5,700. This lead to many, many hours of...
  15. Complx

    Complx Design and Game Station: Asus Sabertooth Z77 - Core i7 2600K - 16 GB RAM - Dual EVGA GTX 660T

    [Success] Complx's Designers Work Station: Asus Sabertooth Z77 - Core i7 2600K - 16 GB RAM - Dual EVGA GTX 660TIs Complx's Designers Work Station: Asus Sabertooth Z77 - Core i7 2600K - Dual EVGA GTX 660TI's Components CPU: Intel Core i7-2600K Quad-Core Processor 3.4 Ghz 8 MB Cache LGA...
  16. skalman

    Boot hangs after corecrypto.kext FIPS POST passed!

    Hey! First time poster, long time reader. : ) I hope I've posted this in the right area! I've got a problem, me and my hackintosh doesn't get along that well! I've had it running fairly good, with the exception that I couldn't install google chrome for some reason. It wasn't that big of a...
  17. tejar11

    My build. Is it fully compatible?

    So yea this is my build is it compatible? :crazy: Im about to get the parts if its good. Motherboard: Gigabyte Z68-UD3H-B3 Processor: i7 2600K Hard Drive: Kingston Hyper X 120 gb GPU: GIGABYTE Radeon HD 6850 1GB Additional: ASUS CD/DVD Burner, 12 GB Corsair RAM, Corsair Obsidian 650D. So...
Top