Hi there,
I've recently finished my first Hackintosh build and I am having an issue getting my external hard drives to show up in Finder and Disk Utility.
From posts I've read of people having similar problems to me, the common solution is to change XCHI Mode in the BIOS of the motherboard...
Hey guys, im working on sierra now, after a hackintoshi on my gigabyte GA B85M D3PH, but sometimes my usb devices turns off and on again, and when they started, they dont work, especially my deatheadder and my usb keyboard, and then i need to reboot the computer to works again, so any of you...
I updated my bios (Z170X gaming 7) to F22j and boot get stuck at this point : PXSX cannot assert wake from D3cold. I can't update my bios to an earlier version. QFlash doesn't want me to. Do you have a solution ? I tried alt F12 to get to my backup bios but no success (?). I use El Capitan...
Hello! This is my first time building a Hackintosh, I'm trying to build a budget computer that can run smoothly, with little to no issues. Please let me know if my build will work, or if you have any experience with any of these parts! Thanks!
Here's my build!
Motherboard (Link...
Hello,
I changed my motherboard for a Gigabyte H270-Gaming 3 (one the recommended board from the buying guide) and now my hackintosh doesn't detect my PCI-E combo card BCM943602CS.
It used to be working OOB with my old motherboard... Am I missing something from the BIOS ?
I didn't find...
Hi,
It seems that High Sierra doesn't detect my combo BCM943602CS card. In my system report, under the PCI tab, nothing is detected (https://imgur.com/a/Sej4N).
Obviously, no wifi on the network system preferences. But the bluetooth does work (probably because it's wired to the USB pins on the...
Hi guys,
i build my first hackintosh,
and all works very good,
only the Graphic isn't very good.
The resolution has to be 4k but it under FHD(full hd)...
can any one solve this problem ?
My Hardware:
-mobo: GAH270M-DS3H
-prozessor: Intel i5 7600k
-graphic: Intel hd 630
-memory: Ballistic Sport...
Hello, this is my first post on the forum. Of course it comes because I'm having hackintosh issues and I'm not the most savvy of users.
Here are my specs:
Gigabyte GA-Z87X-UD5H 1150 ATX
INTEL CORE I7-4770K
CORSAIR 16GB 2X8 DDR3 1866
EVGA GTX760 SC 2GB DDHDP
Samsung SSD 120GB 840EVO
I've been...
It's been quite some time since I've built a new machine but alack and alas, the time has now come.
A lot of things have changed since I've built my last machine. I have been perusing the forums and reading as much as possible and think I have a fair idea of the progress that has been made and...
I'm building my first Hackintosh and I can't load the Mavericks installer. I've tried some boot flags combinations with no success so far, just files loading until I get the black screen. Can anyone help me?
Gigabyte GA Z270X UD5
Intel i7 7700
ASUS GeForce GT 710
Hey Guys,
I built my first ever computer and was able to successfully install high sierra. The next thing that I am trying to figure out is my GC Alpine Ridge AIC. I am not very computer savvy and I am having problems trying to find a solution. I have an audio interface that I am trying to...
I bought GV-N1050WF2OC-2GD (GIGABYTE GeForce GTX 1050 Windforce OC 2G) thinking it would be an easy install. It wasn't. After installing NVIDIA Alternate Graphics Drivers, removing Inject NVidia and adding NvidiaWeb true, the system would boot, but give a no signal message once in High Sierra...
I'm on High Sierra 10.13.1 and my motherboard is Gigabyte Z77X-UD5H, some more specs are listed on my profile.
Note: This machine does not have wifi (wired ethernet connection) and I have switched off all wifi and bluetooth devices within 10+ meters of this machine (except the keyboard, mouse...
I connected the graphics card to a monitor with speakers via hdmi, but there is no audio, I have a gigabyte z270 hd3p motherboard, in unibeast i installed realtek 1220, maybe it isn´t the right option. What can I do?
I have been using my Hackintosh for a number of years and though the help from this site it has not missed a heart beat. I started with the Gordo Golden Build (https://www.tonymacx86.com/threads/guide-ga-z68x-ud3h-b3-with-ati-6870-clean-ml-lion-install.28853/) running almost identical hardware...
The usb mouse works for a while after it stops, only coming back on when it pulls out of the usb port either 2.0 or 3.0 and replacing can be up on the same port! someone with the same problem?
I installed all the kexts with the multibeast in the part of the usb I marked until all the options to...
Well folks, I don't know what else to tell you. You read the headline...
I have a vanilla installation of High Sierra and installed the GenericUSBXHCI.kext through Multibeast and check on some boxes on clover configurator for the config.plist. You can view the images down below.
Does anybody...
First off, thanks to the community for the guide whenever I got stuck on something, and TonyMacx86 for Unibeast and Multibeast.
This is my second Hackintosh that I built. My intention was to use it for XCode, which is notorious for being CPU hungry. I couldn’t stand waiting 6-8 minutes for...
I have had a stable working hackintosh for several months now. This afternoon I update bios from F7 to F20f. The system will post and I got into the BIOS and changed all my setting to the correct ones but when I try to boot into MacOS the apple logo shows up and the loading bar pops up but never...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.