fusion

Hi every one! I’m new to this community. I’m planning to build a Hackintosh, so to replace a Mac Pro (mid 2012). I basically need a machine to work on DaVinci Resolve, 4K video editing and compositing. I’d like to build a machine, that will allow me make upgrades in the coming future, to even...

I've tried pretty much anything but i can't get it to work. Trying to create a new bootcamp virtual machine that uses my windows disk will result in vmware complaining that windows wasn't shutted down properly (even tho it was) Trying to attach my hard disk directly to vmware as indicated here...

I have a perfectly working system with a HPFS+ drive (120GB SSD+500GB /of 1TB/ partition HDD). I'm wondering if it's now safe to convert this fusion to APFS. Since my fusion is also taking part of an HDD partition, I don't want to mess with it to lose my OS X plus the rest of the HDD. Can...

I'm building a new hackmac with a Samsung 960 EVO NVMe SSD. I will install VMware Fusion and run Windows also. Samsung does not list any firmware updates for the 960 EVO for Mac, but they do list an update for Windows (2B7QCXE7). They do not explain exactly what the difference is, or how the...

Hello Everyone, I am using my hackintosh mostly for video and photo editing and was courious about using a Fusion drive for my daily work. The scope was to build a drive with high read/write throughput and high capacity and as cheap as possible. I have with great success managed to create a...

Hi guys, I'd like to create a fusion drive on my fully working El Capitan build using a 60gb ssd + a 500gb hard drive... The guides I found are from 2012 and they only involve Chimera as bootloader... Will it work on Clover? Plus I found a method to create a fusion drive without erasing my...

Hello everyone, i Have a problem to finish booting from fusion drive to maOS Sierra without USB Installer drive, i mad a fusion drive SSD 120 Gb + HDD 500 Gb. i Installed maOS Sierra on that Fusion Drive. i boot up to maOS with USB Installer. After installing clover can't create EFI partition or...

I'v tried upgrading from 10.11.6 to 10.12 on a Fusion drive by downloaded AppStore installer. Updated Clover to r3763 before running the installer. After restarting, there is no installer option in Clover boot manager. Selected the old entry of 10.11.6 but it can't boot anymore. Looks like...

Hi everyone, I installed El Capitan on a Fusion drive about a year ago. By following the guide on http://www.tonymacx86.com/threads/unibeast-install-os-x-el-capitan-on-any-supported-intel-based-pc.172672, I post-installed Clover_v2.3k_r3320_UEFI.pkg for UEFI boot and it has been working...

Hi every one. I like to share my experience. My CustomMac Pro hardware. - Procesor Intel Core i7 4790k - Ram Crucial Ballistick Sport PC3 1600 DDR3 8 Gb x 4 = 32 Gb - Motherboard Gigabite GA-Z97X-Gaming 5 - EVGA Nvidia GeForce GT 740 Superclocked (2GB, GDDR5, PCI Express 3.0) - Samsung 850 EVO...

Hi there, I have an older machine (Gigabyte Z68A-D3H-B3, Intel i5) run Mavericks and created my own fusion drive as my startup drive. I decided to try and upgrade to Yosemite using the excellent instructions online here, and did not realize (and did not research. D'oh!) that things would not...

Hey guys, I've been trying to figure out why my Hackintosh won't boot from Fusion Drive; and it'll only boot from the Clover USB stick I made. My current setup: • Asus Sabertooth Z77, with UEFI secure booting set to "Other OS" (if set into Windows, the motherboard won't boot into Clover at...

Hey, I have a GTX 680 installed and i have also downloaded vmware fusion. I don't know if anyone has any experience with vmware fusion but I can't get any games to work properly with my graphics card. It shows up as VMware SVGA 3D. The only options I have for graphics are Accelerate 3D graphics...

I just bought a 4TB Seagate drive and formatted it as OS X Extended Journaled as a single partition. Disk Utility now sees it as a LVG. This has limited what can be done with it i.e. it can only be partitioned into two 2TB parts, SMART info isn't available anymore. I read that this can only be...

Hi there. Before anything: great site, great stuff :D Which is the easiest way to get Fusion Drive on Mavericks? I've searched on the forums but I cannot find a comprehensible guide. Specificaly with the following hardware: Gigabyte Z77M-D3H Intel Core i5-3570K AMD Radeon 7xxx I've tried...

[Fusion Drive 100%] GA-H77-D3H, Xeon E3-1230-V2, ATI HD7770, ML 10.8.4 This is what my Hackintosh status *didn't know how My CPU is changed to i7.... **I'm using markdown so if you wanna make really clearly reading interface you can copy all my post to Mou.app and see the preview page...

Lukutus33´s Silent HackPro: GA-Z77-DS3H i7-3770K@4,3Ghz, 8GB DDR3@1866MHZ, Alpenföhn Wasser, GTX470, Fusion Drive Components Intel i7 3770K http://www.newegg.com/Product/Product.aspx?Item=N82E16819116501 [AMAZON-de]http://www.amazon.de/dp/B007X1JM30/[/AMAZON-de] Gigabyte Z77-DS3H...

Soooo....I just bought my parts for my first build, and I have some questions as to best set-up my storage. What I have is: 1) Intel 335 series - 240 GB SSD 2) Seagate Barricuda 1TB 7500rpm (Two of these) 3) External seagate HDD for back-up I would like to set-up a Fusion drive with the SSD...

So I found that my hackintosh has a few problems that I think will be solved with a fresh install and reapplying Multibeast/kext etc... and wanted to do a fusion drive as well. But I am worried I will have to reinstall all my applications and settings like my parallels VM which was a pain in...

[SUCCESS] Error 69780 - Unable to create a coreStorage volume (Fusion Drive) Hi guys, I am setting up ML 10.8.2 on my Gigabyte Z77 UP5 TH and seem to be running into problems trying to create a Fusion Drive on my setup. I am using an Intel 520 240GB SSD and a Toshiba/Hitachi 2TB and no...