dual monitor

Desktop photo of dual monitor Comet Lake i9 Hackintosh Ventura build

I installed big sur latest using Opencore vanilla guide and it worked perfectly on single monitor but the trouble begins when I plug in the second monitor. Help me to use my second monitor. What I've done: used only vga/hdmi port at onece a time and it worked (that means vga is working) hot...

Hi all, i've followed the guide (https://www.tonymacx86.com/threads/unibeast-install-macos-catalina-on-any-supported-intel-based-pc.285366/#install) and succesfully installed Catalina on this hardware: Intel i7 7700K (so with HD 630 integrated graphic) ASUS Prime B250 Plus motherboard The only...

Hello, can help me to enable vga port of igpu?, My build is: Open core 0.6.4, Cpu: Haswell i3 4170 Motherboard: Asus H81m r2 (with VGA port only) Graphics: gt730 + hd4400 (integrated, using fake id), The gt730 have 3 output, vga + hdmi +dvi-d, and motherboard have one VGA, i have...

Hi All, I just built my first Hackintosh. Thank you tonymacx86.com for all the useful information. I am trying to connect two monitors to my motherboard (to two LG screens, 1st attched with HDMI port and 2nd attach with DisplayPort using DisplayPort to VGA Adapter) I am unable to get the...

Hi, please have a look at this video: Can you please give me a hint on where to look for troubleshooting? My hardware config is: MB: Asus Z87-A CPU: i7 Haswell Video: NVidia GTX 650Ti Displays: Lenovo Q27Q-10 on HDMI ( primary ) + Benq BenQG2222HDL on DVI Thank you!

Hello all! My underscanned display resolution on my 42" Sony Bravia television does not retain after a reboot of Mojave, thus making me go to System Prefrences>Display and underscan it manually after each reboot. I'm using integrated graphics (HD4600) with HDMI output to the Sony Bravia...

Asus Z390 Gaming-H, Core i7 8700K, Sapphire NITRO+ RX 5700 XT, Dual monitor setup (2 x Displayport) Smbios : iMac 19,1 with iGpu only for computing (no displays connected) Opencore : 0.5.9 Lilu : 1.4.6 WhateverGreen : 1.4.1 agdpmod-pikera in config.plist After updating to Catalina 10.15.6...

Hey everyone, super new to hackintosh and have had a friend helping me with set up. Have been up and running smoothly for about a month now and have just decided to upgrade to dual monitors. I've plugged my new one in, the primary display shows as normal however the secondary is not being...

Installed Catalina 10.15.4 (19E287) Vanilla with OpenCore on my HP Elitedesk 800 G2 Mini. Everything is working (Wifi isn't but I'm using Ethernet anyway) but my second display. I'm trying to get them both connected via DisplayPort as the only other output on my computer is VGA. I've tried...

I got one of the XFX Radeon VIIs on Black Friday and put this in to replace my fried 280x. However I only can get one DisplayPort to work. The others and the HDMl result in garbled screens. Additionally, when I use the one working DisplayPort and plug in an additional HDMI, the screen starts...

Hi Everyone, First of all, I've tried to research how this issue can be fixed but there's a lot of them and I'm still a newbie and don't know where to start. I have two monitors one is 1440p using Display Port and the second one which the one that doesn't have display 1080p using HDMI. This is...

Hi there, I swapped from HighSierra to Mojave. Everything went somewhat smooth except my second monitor. With High Sierra I had no problems with my second monitor, but in Mojave it looks like the first attachment (took the photo with my handy). This monitor is connected via Onboard DVI, the...

Hi I have an HP Elitedesk 800 g3, i5 7500 processor with an intel hd 630 now i have two monitors. and the output on the hp elitedesk 800 g3 takes 2xdisplayports and 1xvga Everytime i connect my second monitor it it hangs after running the verbose on boot and restarts. I have tried different...

So I recently made a Hackintosh. These are the specs: i5-6400 @ 2.7 GHz 8 GB RAM 2133 MHz GTX 1050 Ti Asus H110M-CS Motherboard I installed macOS Mojave on my 128 GB SSD and got everything mostly up and running. But I am having a pretty annoying problem. The resolution on my 1080P screen which...

Hi guys ,i have a problem with my graphics card ati 7870, i only use 1 monitor with mini displaypor(mDPI to VGA) but the other two monitors ,in hdmi and dvi to vga ,not working.Mojave detect this monitors but in black screen. i dont configured the clover configurator because a dont have idea. My...

I have a HP Compaq Elite 8300 SFF (Q77 board, i5-3570). I have High Sierra installed and working (macOS 10.13.01, 17b48); installed web drivers for Nvidia (378.10.10.10.20.107). I restarted the machine after installing drivers and graphics card (MSI GT 710). I want to have a dual monitor set...

Hi, I just got a Dell U3818dw screen in addition to my U3417dw one and ran into a funny problem. Both screens get detected and work, but when I rotate the 2nd screen to portrait in the settings, the first one gets smaller and mirrored to the second. I have an ATI RX 570. The card def. can run...

Hi! I've really tried searching for answers here, but I just can't seem to get it to work. After all the things I've tried I've gotten to this weird state where if I boot with both monitors connected, it works fine for like 30 seconds after the system is fully booted, then the second screen...

Hey everyone! Ive had my Hackintosh up and running for about 6 months now. I recently bought another display and I can't seem to get both displays working at the same time. There is so much information out there and it's hard to tell what is old and/or outdated advice. My main display is...