dual gpu

Hi everyone! I have HP Envy 15t-j100, Intel 4600 and with a dedicated NVIDA GEFORE 2GB, so my question is that can we enable both GPU for a better graphical performance like we use it on windows?

Hello everyone! Since I can't accept being price gouged by Apple to use their products to develop apps for iOS devices, I have decided to see about using my current PC for the job and I'm hoping the community can help me out. Here's what I have available to work with: GTX 760 (in storage) &...

I have a Windows 10 system with the following specs: CPU: Intel(R) Core™ Processor i7-10700F MOTHERBOARD: ASUS PRIME Z490-V ATX GPU: Gigabyte RTX 3070 The CPU does not have onboard graphics and RTX 3070 is not supported by MacOS. My son needs a MacOS device to run xCode for a class he is...

Hi I've got a hackintosh install of Mojave up and running on my system now without the 980. Gigabyte GA-Z87X-D3H with 4770k, 16gb ddr3, gtx980 and k600. If I install the 980 following the 'workaround' instructions, will the performance of the k600 drop as well? In other words, will macOS...

Planning on getting an RX 5700XT, I have an RX 570, my monitor uses DVI-D, I was thinking of using the RX 570 for the Display and RX 5700XT for it's power. If I use RX 570 for my display, will my hackintosh not use the RX 5700XT?

Hi I want to install MacOS on my PC. I saw that the OS does not have support for my GPU (GTX 1060). However, I have a GT 630, so could I use the GT 630 on macOS and GTX 1060 on windows?. Having the two GPUs connected to the PCIe, but using one on each system?

Hi everyone:) I have a question about an “hard” thing that I want to make but I want to know if it’s possible. I want to : connect my Mobo DP to the monitor and (like on laptops) use the amd dGPU on Mac and nvidia dGPU on windows. Maybe I’m not explaining it in the best way possible but I hope...

Hello, I currently have a hackintosh running on my computer with my iGPU (UHD 630). I own a RX 570, I would like to know if it is possible to disable my RTX when I'm on mac? For the rest of what I saw it looks simple so that my RX 570 works under mac os. In the bios I have only one option...

Hello there, I have a workstation with two Nvidia GPU. I run on High Sierra 10.13.6 and everything was fine until I added my second GPU (GTX 1060). I use it for 3D render, not for gaming or SLi etc. MacOs is very fluid, but when I use Cinema4D or Houdini the viewport is very slow. I have...

Picture above: The Sosumi project, and as you can see the GPU tach is maxing out.. :-/ Hi guys. My first real question here is a rather tricky one. I have just finished my build with a 8700K and a dual XFX VEGA 56 (with Vega 64 bios) setup. I built it with the hope to get it working as a dual...

Hello everyone, So I recently installed a second graphics card(GTX 710). For whatever reason, I cannot get beyond the sign in screen in normal mode. I type the password and the desktop loads but then immediately jumps back to the password screen. Everything works fine if I boot into safe...

I have a perfectly working sierra 10.12.6 setup on my 3537. I've read through and gone with the steps mentioned in "Common problems in 10.13.x" thread, stopped VESA drivers from loading by injecting properties. Finally I've checked and updated kexts and clover patches. To avoid APFS conversion...

Hello guys, I haven't found anything on that matter so… My problem is : Everything was running smoothly until I received my second display I plugged into my second GPU (Nvidia GTX980 ti). Now and then I get graphics and UI lags (also on videos sometimes). I had the same problem before but it...

Recently I have wanted more monitors for productivity purposes so I decided on 6 monitors for my setup. To drive these additional displays, I bought a cheap Gigabyte 1060 6GB card and used my EVGA 780 as secondary for 2 of them. 1060 = 4 displays 780 = 2 displays Mission Control and other...

Hi there, I'm hoping someone can help me out since I'm stumped and don't even know where to start. I recently installed a second Gigabyte RX 580 8gb gaming into my system (multiboot for mining while away from computer). With the second card, I can't seem to get past the boot screen. I've tried...

Hello all, I've been using an Asus ROG MARS 760x2 OOTB on a dual screen Mavericks build without problems, then I moved to Clover+Sierra (10.12.4), the card is detected and works BUT the fan's speed repeatly rises up & falls down making a huge noise. I've tried using latest Nvidia web drivers...

I'm new and the time has coming where i need to build my first Hackingtos, i will push a GTX 1080 TI into my build, and i allready have a GTX 1070 in my Windows machine desktop home, and i using it for video edit so one more GPU rendering to my system setup will be a nice one. But can i use 2...

Hello folks! Dropping my iMac to build a new machine! Heres my parts list - looking to make the call and order these in the next 10 days! Opinions and thoughts needed! - ASUS ROG Maximus IX Extreme LGA1151 DDR4 DP HDMI M.2 Z270 EATX Motherboard with onboard AC Wifi - Intel 7th Gen Intel...

Since I've Add a second identical NVIDIA GPU to my system I also change my SmBIOS ➧ MacPro 6.1 + AGDPFix The H264 files playback is really jerky I remove the seconde GPU and don't touch the SmBIOS, everything back to normal Any clues, suggestions ? Thanks in advance

Hi there! Recently I've upgraded my rig from GTX 770 to GTX 980 ti. But i really need the two cards work in Davinci Resolve. I can get my rig boot either with 770 or 980 ti but not them together. The screen just stays blank and if I push the power button it turns off immediately, like the...