I'll be back to post details but I'm so tired...
SO this summer has been tough. Ive spent it entirely building case mods from mac pro or g5 cases. I started with a G5 and was very unhappy with the results because i didnt buy laserhive peices and lack the setup for cutting myself. I did another...
Hello Everyone, Noob here new to Hackintosh community.
Trying to install Mac OS High Sierra on my current PC set up, but getting error/ stuck at Random Seed (image attached)
Current PC Set up:
Asus X99 Deluxe/ U3.1
Intel Core i7-5930K 3.5 GHz 6-Core Processor
EVGA GeForce GTX 1080Ti
2 - Samsung...
I wanted to use only the iGpu without the nvidia card because the 1660 is not supported. How could I do it, is it possible to do it?
Hardware
Mobo: MSI B360M Gaming Plus
CPU: I5 8400
RAM: Corsair vengeance 8GB (4x2)
SSD: 2x Drevo 256gb
I've noticed that in the buyer's guide a lot of the recommended cases for ATX motherboard builds are Corsair Carbide cases.
However, most of those cases have been discontinued and are increasingly harder to find.
What should a builder do to find a case that will fit an ATX motherboard for their...
Greetings to those who are reading this thread.
I am currently having an issue attempting to install MacOS 10.13.0 High Sierra on my Coffee Lake build. I do have a Macbook Pro 13" (Mid 2010) running High Sierra on hand. I run through the installation process, and Unibeast is able to complete...
Hello there,
I successfully installed Hackintosh on my new build. However, I do have an issue with the Corsair Hydro 150i Pro RGB.
I cannot see the fan speeds and also have no control over them. I'm watching the CPU temps with HWMonitor and for the fans speeds i'm using Macs Fan Control - and...
hello. I have just purchased a gigabyte h310 d3 motherboard, a core i5-8400 8th gen processor and 1x 8b cmv8gx4m1a2133c15 corsair ddr4 memory. I successfully installed windows on an ssd but when installing high Sierra using clover with the recommended bios settings, I manage to load start the...
I am naming this build after my favorite saloon in Nashville. I'll keep this thread updated as I go and change the prefix to [SUCCESS] when the time comes. Until then, it's "Work In Progress" [WIP].
Parts
MB: ASUS ROG Maximus X Hero
RAM: Corsair Vengeance RGB PRO 16GB (2x8GB) DDR4 3200MHz...
Hello everyone,
I am trying the Hackintosh route again after trying 6 years ago and not having much luck.
Was hoping the the process might of improved, but I am still running into problems.
I bought a ASUS Windows machine off a friend for basic video editing, however, as a long time OSX user...
Hello! This is my first time building a Hackintosh, I'm trying to build a budget computer that can run smoothly, with little to no issues. Please let me know if my build will work, or if you have any experience with any of these parts! Thanks!
Here's my build!
Motherboard (Link...
Hello there dear all,
I'm planing on my first Hackintosh build, actually PC build ever. I've been using Macs for long time, though have to admit for an upcoming project I'd rather save money and put it into my film, and this seems like the best community out there.
I was wondering if I could...
I have been looking into a hackintosh build for a while and decided to bite the bullet and go ahead. I have only got the case so far and before I start spending my hard-earned cash I wanted to make sure what parts I spend it on will work in macOS with as little issues as possible.
The parts I...
I recently got a Corsair K65 (not RGB) keyboard to use with my hackintosh. I already have a mechanical keyboard, the Razer Blackwidow Tournament which has worked with my 'hack perfectly for months. Because the Razer green switches sound like a rusty typewriter when I don't wear my headset, I...
Hi guys,
My PSU recently starting making a loud buzzing noise, and apparently this is common with Corsair - however all of the suggested PSU's on this site are of course manufactured by Corsair.
I'd understandably now like to stay away from Corsair, and won't go anywhere near any of their...
I've decided to build a completely new setup. Currently my i7-3770K just doesn't make it anymore.
It's only used as the workstation for color grading work and the current setup is:
Mother: Gigabyte Z77X-UP4
CPU: i7-3770K
GPU: GTX-770 4G + GTX-980Ti 6G
RAM: 32G DDR3 black vengeance
PSU: Corsair...
Hello everyone!!!
My name is spiruni and a newbie around here!!!
So i want to build my gaming rig but i already got a pc that i build on my own a couple years ago. Now you see i dont want to have two pc with windows and also i would like to start coding adn editing (from time to time) on...
Corsair's first fully built PC is here and it's called the "Corsair One". http://www.corsair.com/en-us/landing/one
Do you guys think it's cool? Would you consider buying one, or would you like manufacturers to make cases like this?
I think this is a brilliant idea and I bet more manufacturers...
Hi everyone,
after a lot of reading , testing , debugging i can't get Sierra to install on my desktop.. Here is my configuration:
CPUs: Bi-Xeon E5-2630 V3 (16C-32T) à 16 x 2.4~3.2 Ghz
Cooling: Double Corsair H60 (Watercooling)
Motherboard: ASUS Z10PE-D8 WS
Graphics cards: Asus GeForce GT 740...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.