boot

I installed Mojave following the Multibeast guide on this site. Macos will start without problems if I use the USB stick as a bootable disk. It freezes to Apple logo if I use Boot OS Samsung SSD ___ Gigabyte Z370 AORUS Gaming Wifi rev.1 Intel i8700K SSD Samsung 970 Pro

First time builder- So i have installed Mojave and i have this problem with booting, i have to try booting like 20 times before finally getting passed the image below and once it passes that point, everythings fine and loads normally - i Believe it might be a problem with ram mapping but i have...

My system is an (old) I7 920 on a motherboard Asus Sabertooth x58. I had Mojave working correctly (only the problem of Nvidia drivers), audio was working, USBs, network... I have updated the system to the latest version and now does not boot, before rebooting I installed the latest version of...

Stuck at Waiting for DSMOS during booting up. How to fix it? I have installed Lilu, whatevergreen and apple ALC. I am using the latest version of clover with legacy mode. Thanks for replying.

I have installed macOS with clover and it has been working wonders until recently. I have windows on a separate HDD and it suddenly showed the blue screen of death. After that, my computer had trouble turning on, however I managed to fix it by removing the ram, and windows is now working again...

My build worked for 3 years, but suddenly it's not booting up. This started after I lost power while the system was working. When I tried to turn it back on, it gave me these errors (image below). I'm stuck at this screen. I made my own build 3 years ago, but I'm not an expert, especially since...

I have a gigabyte H310M motherboard, booted and installed Windows properly, but now can't get it to boot the Mojave USB. BIOS options are set to the right ones for hackintosh. I can get the USB detected and showing up in the boot devices by enabling CSM but then can't boot it at all, I only get...

Hello, I have been running High Sierra for a few months now with no issues. I decided to install a new SSD for my Windows Drive (separate drive from my macOS SSD), and now clover only sees NTFS and old mac backups. I know the drive that has my High Sierra boot partition on it is working...

Hi ! I really need help to understand what is going wrong with my setup. During 2 years I was on macOS Sierra and everything was fine, I use this workstation to work everyday, but I had to update to High Sierra due a software update. Of course I did a fresh install for macOS High Sierra (based...

Hello Awesome People, I have already achieved installing hackintosh in past in the same configuration a year back and i have another desktop with the same configuration, in which i am trying to install high sierra. Created a bootable disk followed the entire guide of installing high sierra to...

I had a 17.2 system fully functional system. Today when I turned it on it did not load with the nvidia drivers. I have updated last clover configurator and launched Ifgx for repair. Since then, it does not start in high sierra or sierra, neither in normal mode or safe mode. This is the verbose...

I have had a Clover-Mac on my i5 for a while, I began with Sierra then upgraded to High Sierra. Everything was working well (even on my linux and windows installs). The only hiccup I had, was my previous external graphics card (AMD Radeon) wasn't really supported, although it displayed fine in...

Hi everyone, First, there is my setup : MotherBoard : ASROCK Fatal1ty X299 Gaming K6 Socket 2066 CPU: Intel CoreX i7-7740X 4.3 GHz Graphics: NVIDIA GTX1080 6GB Other Hardware: Memory : DDR4 16GB CORSAIR VENGEANCE LPX Black 3200Mhz C16 HDD : SSD 500GB M.2 SATA WESTERN DIGITAL Blue...

Hello, I've installed macOS Sierra on my Thinkpad T430 and all went well. After installing it and the Bootloader I tried to change my System Definition from iMac13,2 to MacBookPro9,2 because that is the closest Mac equivalent to my System. But after changing it I am unable to boot. The System...

Hey, System Hardware: i7 4790k R9 290X Have a nice install going of High Sierra 10.13.2, only issue is I have to manually go into Clover options on boot up and select the checkbox for DeInit: followed by my GPU information (I've attached a picture). If I don't select the box it hangs halfway...

Hello everyone. after installing High Sierra the pc can not boot from the SSD showing me this screen. with the inserted USB I am shown this screen of choice where I can start from ssd os x just installed (very slow). the same applies if I unplug the key. needless to add that I tried to change...

Hi there! I´m trying to install macOS HS (High Sierra) on my Acer Aspire ES1-512-P5G4 Laptop using UniBeast and Legacy. When I want to boot the installer it stucks at "End RandomSeed ++++++++++++". (see attached image) Used Boot flags = -v, USBBusFix=Yes, UseKernelCache=No, nv_disable=1, dart=0...

Clover boot screen used to be properly sized (1080x1920). But since recreating Clover after my boot SSD died, I am stuck with this annoying giant icon boot screen and also the old stretched apple logo. The stretched logo changes to correct size on stage 2 of the boot process. This is minor but...

My Dell Optiplex 7010 is booting up extremely slow, but it does work 100% when it finally boots. Time is probably about 2-3 minutes. Any idea how to shave this time down? Most of the time it spends is booting from the dell logo to clover and it takes a long time at the user settings and where it...

Hello, I have a ASUS ROG STRIX H370-I GAMING Motherboard and I created a bootable UEFI USB with MultiBeast 9.0 the USB is readable in macOS an everything looks fine. I was able to change most of the points. I can't deaktivate no. 5 and I cant find no. 7 How am I able to install macOS...