boot problems

Hello all! I have recently installed 10.13.6 on my HP Z600 workstation. I fixed the USB, patched the graphics for my R9 270 and didn't manage to properly fix the sound, but instead used HDMI audio to avoid this problem. The main issue now, however, is that roughly half of the times I boot into...

Hi When i try to boot for the first time and get to the installer it crashes(black screen but still on) after getting approx 90% of the way through the bar i think i might be something to do with my graphics(intel HD 520) but i don't know. plz help me Thankyou

Hello Community, I hope you are fine. I'm making my first Hackintosh, and I have a problem. Here's my setup : - Motherboard Gigabytes GA-Z170-HD3P - CPU i7 - 7700k - PSUs: Corsair RM650x - RAM : Crucial Ballistic Sport Lt (2x16GB) - HD : Samsung 850 EVO 500 GB - Cases : Corsair Carbide...

Please excuse the following question from a novice builder. I am following the buying guide from this past winter. Currently, I'm running a Gigabyte GA-Z97X-UD3H-BK with the Intel 4790K CPU and the EVGA 740 4G graphics card. I managed to install El Capitan easily enough. I had some problems with...

i had successfully installed OS X El capitan on my Hack yesterday. Was going through my System Preferences in the morning today, and turned the FileVault ON and the system asked for a reboot. I haven't been able to log into my system since then. Upon a fresh start, both the main disk as well...

Hey guys I met a problem with my hackintosh OSX 10.11 after restarting computer, it will add one UEFI boot opition everytime. any guy can help me? The hardware list : The problem:

I am upgrading to El Capitan and everything was fine until I decided to not pay attention and deleted the Boot folder from EFI on accident. As of now I receive this message, "reboot and select proper boot device" How can I fix this and restore my Boot Folder in EFI. Any direction of help is...

After a week of running well, other than the lack of audio, I am unable to boot up and the last screen I get to is the loading black bar at the end before the OSX prompts your for user and password. Here is my current build, any help is appreciated, this is my first build: Gigabyte Black Edition...

I am trying to install Yosemite and, when I boot off of the Flash Drive, the progress bar stops at about one quarter of the way... then a stop sign icon appears. My configuration is as follows: Motherboard GA-Z68MA-D2H-B3 4 GB 1333MHz PC3-10666 Intel Core i5-2405S Quad-Core Processor 2.5...

Hey folks I´m new and i just build my 1st Hackintosh. I had it up and running but then i installed an update from the App Store :banghead: and now i can only boot in safe mode. Is there a way to rollback these updates or can anyone give me a general idea what to do now. My System is a i5...

I had my dual boot hackintosh running great... until my hard drive began to fail. Luckily, I was able to clone it to a new drive. However, now I am unable to boot into Windows. I've tried booting with my Windows 7 disk to do a system repair, but I get errors that the install disk is an older...

Build info. Running Mavericks Gigabyte GA-Z87M-D3H i7 4970K 32 gb crucial sport GT 760 SC Kingston v200 240gb SSD toshiba 2tb HDD I'm trying to get my graphics card to work. I used multibeast to give it the GraphicsEnabler=No boot. Now every time i try to boot with or with out the card...

I am having a few problems in regards to installing Mavericks on my Envy, which currently has Win8 installed. My main issue, at least for now, is that when I boot from the USB, I get to the main screen where you select the OS you're installing (Mavericks, in my case). However, I select it, the...

Hey guys, As it says in the title, my Hackintosh is not bootable after installation. Chimera is allready installed. It stucks at the Apple-Spinning wheel screen. I've tried everything, it doesn't work with -x, -s, GraphicsEnabler=No/Yes and this npci stuff. In -v mode it stucks after...

Hi there, My first build, and it's been a little more aggravating than I initially anticipated (first motherboard DOA). Computer is now on, and after a little tweaking I got Mountain Lion installed and Multibeast good to go. The only problem now is that when I boot, the computer boots just...

Hello, I am attempting to complete the build on my computer which includes: Z77X-UD5h Mother Board, Intel I7 4 Core, Geforce GTX 670 Graphic Card SSD, 16 gigs ram, 650 watt power, 500R case All recommended configurations. I have formatted my SSD drive multiple times, swapped out a 1T drive to...

having trouble with my new build just put together a; GA Z77X up5 th f11 bios 3770k vengance 16gb ram (2X 8gb) with a 128gb ssd ive tried everything i could find to get into ml 10.8.4 to boot but i can only load in safe mode which i did to load multibeast but now i cant even get into safe mode...

I've been going through the forum and have tried lots of things, but no matter what I do, I can't boot successfully from my SSD. I can boot in safe mode, but not a regular boot. When I try a regular boot, I get the grey apple screen and the spinner, but it never completes. I don't know where...

I've been having a lot of system lock ups with FCPX. Did a reboot the other day and the Chimera wouldn't load. I just get a disk error now. I can force OSX to boot when running the BIOS. But this is not optimal. I'm between projects, and am considering doing a reinstall of the OS. I have a...

I know that this laptop will work because I got it working once a few days ago but I tried using the Probook Installer and it messed up my installation. Trouble is, I don't remember what it is I did to get it working in the first place! I have a hackintosh mac pro which I'm using to help...