bios settings

  1. ivailo

    MacOS High Sierra 10.13.6 Whether my computer is supported

    Hello guys. I would like to ask if my configuration is suitable for the installation of macOS High Sierra and here it is: Motherboard: Gigabyte B250M-D3H CPU: Intel Core i5-7500 3.40GHz RAM: 16 Gb GPU: Asus Rog Strix GTX 1060 6GB SSD: Adata 120GB
  2. gabrycosta04

    HELP! Compatibility information and EFI folder for installation

    Hello, I'm new to the hackintosh world, I wanted to know if my pc is compatible with high sierra, my build is: CPU: Intel i5-8400 Motherboard: MSI B360M Gaming Plus GPU: Radeon R7 250x 2GB I also have some questions about it: What kexts do I need to make Hackintosh work? What DRIVER64UEFI do I...
  3. jsm1994

    Cant boot from USB. Can’t pass the bios logo.

    Hi guys, My problem is i can’t start from usb. I tested with High Sierra and Mojave and it does not start. I tried to create the usb using the macOS and unibeast terminal. Nothing works. I have followed many guides, none has helped me. Can someone tell me what could be the reason? Thanks for all
  4. mattbatt

    DRAM Voltage Changes on Cold Boot

    Question: What would cause cold boots to change DRAM voltage from my saved setting in BIOS of 1.67v to auto running at 2.65v? My Ram is not overclocked and is rated at 1.5v. If I cold boot, go into BIOS immediately, go to memory settings, I see it 2.65v blinking RED. I change it back down to...
  5. memoryLB

    [Solved] No Option "Other OS" in System Type for Gigabyte Z370M-DS3H

    hallo i bought the motherboard Gigabyte Z370M-DS3H according to the advice. However, when i was in the setting of the bios in "System Type". there is no option for "other OS" to pick up, only "Windows 8/10" and "Windows 8/10 WQDL". And therefore the installation failed. Could anyone help me ...
  6. akbar.ahad123

    Pegatron Odense Motherboard Compatible??

    Hi guys, Im completely new to hackintosh and was trying to install mac os sierra onto my pc. I have created a bootable usb drive but when it came to configuring the bios on my pc, I couldn't see many of the settings that were shown on the videos I watched. The bios was very simple and hardly...
  7. Hierarchy

    Asus Bios settings(help)

    So I have sierra installed, and it all worked "great" but my the frame rate was quite brutal. But A friend gave me a new graphics card (MSI R9 390x) and after playing with my Bios settings and it not working, I gave up. Only problem is now I can't get my original Graphics card working. It was...
  8. margusta

    El Capitan lockup/freeze when going to sleep with 82567V-2 nic

    Hi, I have succesfully installed OSX 10.11.6 with Clover legacy boot from BIOS and running smoothly now. I do have a problem, where, when putting the machine to sleep, the system tries to do just that, but apparently fails and freezes due to Intel 82567V-2 network controller and...
  9. Arvindron

    Success on DG41RQ (NO AHCI)Mode - Running 10.11.6 With Everything Working

    DG41RQ - No AHCI Mode Intel Core2Duo - 2.83 Ghz Graphics Card - GT610 - Connected VIA HDMI Working Audio 662 With Clover Injection-5 Realtek Lan Sleep Mode is working. Bootloader - Clover v2.3 (3726)BootLoader Installed In GPT Partition way Only. BIOS SETTINGS Harddisk -> SATA -> LEGACY
  10. Gslashg

    I can't install El Capitan using Asus H81M-K Motherboard

    Hi guys, so I just found an old desktop on my garage and thought I could try and experiment installing a hackintosh to it. I researched about my motherboard and found that it is supported, so I tried. First attempt was not a success and so far I don't see anything even in verbose mode or safe...
  11. brookchef

    T420S booted fine until I flashed the bios

    Hello! After installing El Capitan successfully on my T420S, I booted from a Windows 7 drive and flashed to Bios to use Wifi. Booting now hangs. I have looked into the BIOS settings, and notice that when I disable the auto select for graphics and set to Integrated Graphics, the graphics...
  12. kookoo

    HELP! Not able to disable CSM on Gigabyte GA-Z97X-UD7 TH

    Hi, I'm trying to install Yosemite using Clover. My setup is as follows: GA-Z87X-UD7 TH i7-4770K EVGA GeForce GTX 760 Corsair Vengeance 32GB Corsair H100i 256GB SAMSUNG 840 Pro (Yosemite) 128GB SAMSUNG 840 Pro (Windows 7) I have read that CSM is supposed to be disabled and Secure...
  13. pjwelcome

    HP G62 i3 Cant boot Unibeast flash

    Hi guys , Ive been trying to install mountain lion on my HP notebook and i made the unibeast Flash in my virtual machine and then i booted from USB,once i did that i got the option of choosing the Unibeast flash with mountain lion 10.8.3 on and then when selected the apple logo comes up for 2...
  14. ulrich_ulisses

    Problems installing 10.7.5 on IviBridge CPU with Z77X-UD5H main board

    Hello guys, I have trouble installing Lion on my system. I guess it has something to do with the Bios settings. Here is what I did: Downloaded OSLion form the AppStore yesterday (Probably 10.7.5. but i have no idea how to find out if this really is the case). Downloaded and ran Unibeast...
Top