I've had a working Hackintosh system with basically the below setup for around two years. I've been running on the Vega 64 since I upgraded to Mojave. After upgrading to Catalina, I purchased the 5700 XT, which I received and installed yesterday. Everything works great in Windows.
When I...
Hackintosh install is stuck at APFS module start 1393.
It gets to this in install, and then freezes and after about 5 minutes a prohibited circle appears.
This stops all installation progress and I don't understand why this is happening
Does anyone have an idea on what I should do?
Hi everyone!
I'm trying to build my customac with these components:
CPU: i5-9600k
RAM: corsair vengeance lpx 3200 mhz (2x8 gb)
Mother: Asus Prime Z390-P, Bios version 2606
GPU: Sapphire Nitro+ Rx Vega 56 8Gb HBM2
SSD: Crucial p1 M2 nvme pcie.
I've set the bios as recommended by the standard...
Hi, first time posting…
I'm having a hard time booting off the Mojave installer disk, and always get stuck at "AppleNVME: Assert failed…" (see attached image).
I've attached my EFI folder and my Config.plist in case anyone would like to see what may be wrong.
Could anyone help me? Thanks in...
Asrock h110m DGS R3.0, g4560 and gtx 1050ti
I used this https://www.tonymacx86.com/threads/success-pentium-g4560-h110m-dgs-gtx-1050.279350/ as a manual (and several related topics like this), but but i did not succeed. I tried install high sierra and mojave but the result was the same...
I'm trying to install mac os mojave on my pc
intel core i5 9400
asus rog strix b360-h gaming
16gb ddr4
gtx760 2gb
I perform the steps of the guide to install mojave, so it puts the black screen with the white apple and the white bar charging, I leave it for about an hour and the white bar...
Hello,
I have issues to install Mojave macOS . I get stuck on:
(IONVMeFamily) AppleNVMe Assert failed: ( 0 != data )
Lenovo Yoga c740
cpu i5-10210U
Samsung MZVLB512HBJQ (pm981)
Hi,
I am trying to setup the Mac on my PC
Asus ROG STIX B-360 Gaming
Radeon Sapphire RX 580 Nitro+ 8GB
Intel i5 8400
SSD ADATA XPG SX8200 PRO 512GB PCIe x4 NVMe
And I am stuck on this. Does anyone had similar problem or know how to fix it?
Best Regards!
Hello everyone, I've been following RehabMan's guide to boot the osx Mojave installer on a Asus VivoBook S14 laptop, but i get stuck at the line apfs_module_start:1393, what could be the problem? I've attached my EFI folder. Thanks in advance.
Hello!
I have a problem to boot the installer.
My setup:
I5 9400F
MSI AMD RX580 8GB GDDR5
Asus Prime Z390-A
16GB DDR4 Ram
NvME Samsung 256GB + 480 GB SanDisk SSD
Picture with error and my efi folder are in the attachment.
Would love if you could help me
Hello ,
I do my hackintosh under mojave, and my problem as you see on this screen, the installation freezes.
I leave you my efi so below.
My config:
Motherboard: hp 843b
CPU: Intel core i5
Graphics: GTX 1050
Thank you for what will help me
Hi,
I am a green hand and this is my first hack, I am stuck with the installation progress bar.
My desktop:
CPU: i5 9400F
motherboard: Asus TUF B360M-PLUS Gaming S
Display: Saphire RX560D
Disk: HP EX950 1TB
EFI/CLOVER/kexts/10.15:
78938-NullCPUPowerManagement-1.0.0d2.kext
FakeSMC.kext...
Sorry if I post this wrong but I can't seem to get past installation as it hangs on apfs_module_start:1393
i5-9400f
Gigabyte H310 S2P 2.0
8GB of Crucial Ram
PowerColor RX580
For my first build I cannot reach past the clover screen to reach the installation of Mojave.
I get thé AppleNVME Assert Failure, and then q lot of text I cannot figure out.
My specs for this build are in my signature. A picture of the screen attached.
Hello guys, trying to install MacOS on 14.5. Created a unibeast boot drive and i get stuck here. I'm on BIOS 0073. Not sure where to go from here. I tried downgrading the bios but it says i can't.
Mojave 10.4.6 USB on 32GB made with Unibeast 9.2.0
Config is:
ASUS ROG STRIX Z390-H Gaming BIOS v.2603
Core I7-8700
Team Group 16GBx1 DDR4 26666Mhz
ASUS PCE-AC58BT Wifi/BT PCIe
WD 500G SN750 NVMe
Boot hangs as follows:
All clues gratefully accepted
Hey Guys,
i have the following Problem: I made the install-USB Stick, the system shows the clover menu and i start booting from the stick. Afterwards it starts to install but stops at the following stage (shown int he picture). I have no idea how to solve it.
My System:
Gigabyte Z370N Wifi...
Catalina post installation Stuck on “apfs module start”
Hi guys!
I was able to successfully install Catalina using a fully working Majove install.
Basically put, I started the install from a hard drive with Majove installed on it to a different drive. I did this because I did not want to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.