ahci

Greetings! Created a bootable flash drive using this manual - https://www.tonymacx86.com/threads/unibeast-install-macos-high-sierra-on-any-supported-intel-based-pc.235474/ + in addition, I added SATA-100-series-unsupported.kext, SATA-200-series-unsupported.kext and AHCIPortInjector.kext In...

Big Sur has removed the AppleIntelPchSeriesAHCI class in AppleAHCIPort.kext so the Intel family AHCI drivers are no longer recognized as such and are shown as generic. Some users dislike seeing the Intel driver for a certain family come out as generic although this is a purely cosmetic issue...

Hi there, I've successfully installed my Mac Pro 5.1 with UniBeast. I can boot it successfully from USB drive, but I can't get it to boot from the hard drive. I have installed Clover in the HD EFI folder. My approach was, rather than run Multibeast, clone the USB EFI folder to the HD EFI...

I figured I'd stop spamming your threads and consolidate here. Hopefully this can be turned into a solved/guide post. In short, my SATA ports loaded as Generic fine in Mojave but I'm guessing it was improper and I was simply getting away with it. In 10.15.2 if I enable any occupied or...

it's my first time to build hackintosh (high sierra 10.13.6),i find there is no other hard drive in finder; so i change the settings from raid to ahci in bios and reboot; it works fine and show the all hard drive before i shutdown the pc; problems : 1. i open the disk util, it loads so...

Hello! I had a working Sierra 10.12.6 Setup. Mobo: GIGABYTE P61-USB3-B3 (H61 Intel 6 series Chipset, Cougar point, No IGPU, only discrete, Legacy BIOS) CPU: i5-2300 2.8 GHz (Sandy Bridge) GPU: MSI Radeon RX 580 8GB 1.:GPU Yesterday I tried to install Mojave but I can't get to the installation...

The Dell Optiplex 390, which lacks AHCI: has taken up too much time to attempt to install. If a Dell OptiPlex 3010 is outfitted with HS, isthere any reason why it can not be patched with the AHCI kexts and tranplanted to the Optiplex 390? The Optiplex 390 does not feature AHCI, the link...

I've installed Hackintosh on HP 8000, according to guide by VoiletDragon. Every thing is working normal but I can't seem to play games efficient so I decided to dual boot. Jack mentioned that AHCI Storage is required to boot Hackintosh with my configuration. Now, AHCI Storage don't work for...

Hello guys, I am getting these errors from the bootloader. anyone got any ideas how to resolve this one? (screenshots attached) ** not sure why the clover config images show upside down once uploaded**

Hi all, Hoping if theres someone who can help me solve my problem. Thanks in advance for the advice. So i run El capitan 10.11.4 with win10 in separate hdds. I connected all HDDs (win10 & osx) to sata3 controllers set to AHCI. One day, out of the blue, the hackintosh refuse to boot and stuck...

I've been trying to update from Sierra to High Sierra for a while with little success. Initially I tried following the upgrade guide, which would get to the point of rebooting to complete the installation and the system would crash. Next I tried doing a fresh installation using an external USB...

Ok so i recently learned about hackintoshes and decided to make one myself. Here's the problem... When i first tried installing MacOS (after activating USB injection and ownership) i got a ''prohibited logo appearing''. Did a bit of research (correct me if im wrong) but apparently that can be...

Hi All, I've going nuts for the las week tryiing to solve this one. Hopefully somebody can shed some light on my problem. I have a GA-H55M-D2H with hackintosh since I first build it (four years ago) with three drives, a 240GB SSD, a 750 HD and a 2TB HD. It was working flawlessly on Sierra but...

So I'am trying to instal Sierra on MY pc, but when i get to selecting the DRIVE it only shows the USB which i am installing from. I have a ROG MAXIMUS VII RANGER(Z97) motherboard. My SATA setting is set to ACHI. PLease HELP me

Hey guys I am not able to configure the BIOS of my motherboard The option to switch from SATA to AHCI or IDE does not appear in the PCH Storage Configuration session I try to follow the other settings, but every time I start the installer the screen turns black after verbose mode Please help...

I am looking to build a new rig with a Gigabyte GA-Z170X-Gaming 6 - and using my existing CPU/RAM/GPU (for now). I currently have a dual boot setup via Chameleon on Mavericks & Win 10 all using SATA (thanks to this forum). I prefer a set it and forget it configuration that does not require a...

Hi, I have the following parts: motherboard: gigabyte ga-z170x designare 2 x hdd: western digital red 4tb 1 M.2 Samsung evo 500gb. Today I successfully installed Sierra on M.2 sdd. Now I would like to set raid mode to the other western digital hdds. In according to motherboard guide, it specify...

I have a PC that I already succesfully converted into hackintosh. Then I have changed the GPU from nvidia to AMD and I wanted to reinstall the OS as old stopped booting and it was cluttered anyway. So I took the same USB stick, plugged it to the same MacBook Air, made the same 10.12.2 installer...

I've been able to install Mac OS X Mavericks and Yosemite. However with the recent update to El Capitan and Sierra, RAID hard drives are no longer supported which is what my computer uses. Is there any way around this and get it to install anyway?

I have looked everywhere for 2 days now. I have read so many forums and tutorials and I cannot find a solution. I am trying to reformat my SSD during installation but Disk Utility does not see it. The only thing showing up in Disk Utility is the USB drive. I have AHCI enabled, VT-D disabled, and...