Just got a Geforce 980 Ti and 4k tv for my old (not Hack) MacPro 2008. 4k image is too small, and no controls for scaling, so trying to use SwitchResX, but it now says no custom anything in OSX 10.11.6 (can't update further) without first disabling SIP which seems to require CMD R at boot...
Z97 Gaming 6 High Sierra Install
MSI Z97 Gaming 6
Corsair Vengeance 16GB 2400Mhz
Kingston A400 240GB SSD
GTX980Ti x2 SLI
Corsair CX850M PSU
TPLink WDN4800 Wireless Adapter
1. Create bootable device with a MAC and Unibeast by this method...
So, before I go out and buy a new graphics card, I was wondering if anyone can help. I can't find a single thread about this issue, which tells me it might be my Craigslist GTX 980 Ti 6GB card failing. Or perhaps a PSU or RAM issue? BIOS needs updating?
Here's the scoop:
When I boot up, 80%...
I just recently upgraded from my old AMD 6870 to a Gigabyte Windforce OC 980 ti. I've been researching on the forums here and thanks to the great posts, I have my new card running. The problem is, it is performing worse than my previous card and the HDMI port is not working.
Recently I've upgraded my rig from GTX 770 to GTX 980 ti. But i really need the two cards work in Davinci Resolve.
I can get my rig boot either with 770 or 980 ti but not them together. The screen just stays blank and if I push the power button it turns off immediately, like the...
I have all the parts and PC build up and running smoothly on Windows 10. Going to be hackintoshing it.
Looking for tips and tricks that I should be aware of, so far I tried following this guide...
just a little help needed here I think.
I changed from 680ti to 980 ti in order to work on GPU based programs like Davinci Resolve and Adobe suite.
All connected, working, in the sense that the OS fires good, but when I open Davinci it says no GPU installed.
The latest drivers are up to...
I've updated my desktop to macOS Sierra GM (i7-4790K, Maximus VII Gene, GTX 980 Ti), and have thus needed to update the nVidia Web Drivers to get full acceleration out of my 980 Ti.
I have Nvidia Web Driver - 367.10.10.05b01 installed.
Now my problem is that I get the classic "black...
I built my hackintosh and got everything running fine on el capitan.
I used this guide, as the board and components were similar:
However, the motherboard is giving error code 51...
I'm so tired to try install Hackintosh to my rig (which is Asus Sabertooth x99/i7-5930K/16 MB RAM/980 Ti)
Whichever i try to boot with my USB stick (El Capitan) My boot interrupt with this error (see picture below).
I tried everything in bootflags section and also osxaptiofixdrv-64.efi...
Hello guys! Im currently working on my new build. My main purpose is to play WoW in 4K on Ultra settings at a steady 60FPS and some other light tasks (browsing,video,photo etc.) . I plan to dual boot Windows and OSX in case something goes wrong with OSX. Is my build good enough for the following...
My build is:
Ddr4 ram 16GB
Evga 980 ti
Dual boot Windows 10 and El Capitan
System id iMac 17,1
I have OS X booting and working until I try to use the proper nvidia setting. When the nvidia boot flag is selected, it will boot then go to a black screen. I also...
I'm looking for a good build for a 3d (modeling/texturing) intended hackintosh, I'm planning to buy these components:
OS: El Capitan
CPU Intel BX80662I76700K Box Core I7-6700K
Motherboard Gigabyte GA-Z170X-Gaming 5-EU
GPU Gigabyte GTX 980Ti G1 Scheda Video, 6GB, PCIE
I have been trying for days now to upgrade to Yosemite or ElCapitan. Whichever I can get to work first. I have followed each guide from to back that I have found on the forums. All either failing early or getting to the end and giving me "essentials.pkg" errors. More recently I have been...
Hi guys. I've looked through about a hundred threads and can't find anything about it. I want to get a 980 ti video card and I've noticed that there are only two cards listed on the buyer's guide. Obviously I would go with those 2 companies of cards... But I have found much better deals on...
I've nearly finished getting my x99 hack running smoothly, but I'm having a kernel flag issue..
The system won't boot into Yosemite unless I type these kernel flags at startup:
I've already added them to my chameleon.boot.plist so I'm not sure what the issue...
So first time customac \ hackintosh builder. Parts are as follows.
Sabertooth Z97 Mark 1
GIGABYTE GeForce GTX 980 Ti DirectX 12 GV-N98TWF3OC-6GD 6GB 384-Bit GDDR5 PCI Express 3.0 x16 ATX Video...
[Solved] Boots through USB, Not through UEFI.
Hey Guys, I thought my problems were solved but I was wrong.
I could boot to the UEFI for one day and then something broke. The only thing I did that I can think of would be that I used Migration Assistant to move just my applications from an old...
I managed to boot the Yosmite installer from UniBeast using these boot flags.
npci=0x3000 PCIRoot=0 PCIRootUID=1 cpus=1 maxmem=2048 USBBusFix=Yes nv_disable=1 GraphicsEnabler=No IGPEnabler=No "Graphics Mode"="1024x768x32@60" UseKernelCache=No -v
I then booted back into the UniBeast and tried...
I could really use some help, guys. I don't know much about hackintosh builds, this is my first build ever, and I am a complete noob. I need to finish editing a project for a client, and my time is very limited, so ANY and ALL help is greatly appreciated.
My hackintosh was...