I got El Capitan working on my desktop computer, but it just randomly freezes (I have to restart the computer after a freeze).
After looking up solutions on how to fix it, I saw that the ethernet kext may be at fault. So I removed the kext and wouldn't you know, it wasn't freezing anymore, but...
MoBo : Asus z97-c
Processor : Intel Core i7 4790K
Hi, this is my first hackintosh that I build. After installing it with no problems whatsoever, but after finishing all the other things I noticed that the audio is not working.
At System Preferences > Sound it shows me this:
I don't have any...
Hi,
It's my first time building a computer myself, so I went to the "Buyer's Guide" and chose these parts:
Intel Core i7 4790K
Cooler Master H60 Watercooling
Asus z97-C Motherboard
2x Samsung EVO 850 250GB SSD
Crucial Ballistix Tactical 16GB (2x8GB) DDR3-1600 Memory
Silent Base 800 - Case...
Hello,
I am new to the world of hackintosh. I barely started reading last night and finally got the courage to execute my first one. I used this link https://www.youtube.com/watch?v=E0qf9j68lVQ for my installation. I used boot args nv_disable=1 only. I finished installing el capitan.
Issues...
Hello,
Motherboard: Maximus VII Hero
Processor: 4790K
Graphics: 980 Ti
HDD: Sandisk 120GB SSD
I've successfully installed El Capitan but without any sound! I used the kext ALC1150 within multicast but to no avail. I installed the clover UEFI boot loader, fakeSMC along with the plugins. In...
I'm building a CAD workstation and got a crazy idea that perhaps I could hackintosh it. I would love to do most of my work on a Mac and then switch over to a PC when I needed to run my PC CAD progs.
Heres my build so far:
i7-4790K
Asus Z97-A/USB 3.1
g.skill ripjaws x series 4x8gb ddr3-2133...
Hi guys,
I'd like to start by saying that this is my third post in this forum and I have to complain that I have got no reply on them. :-(
I don't mean to point that the community is not active because I see people discussing anything and everything. I'd like to know what went wrong? Did i...
Hey guys! Its been so long since I did a hackintosh. Approximately 2 years have passed since I used my hackintosh system and now I want to do it again with better hardware!
My current specs right now are:
Intel 4790k
Asus H97M-Plus
Avexir 2x8GB 1600Mhz
Zotac GTX 970
Samsung 840 Evo 120GB...
Hi All :)
I Built a Hackintosh about 3 Years ago & I am now in the Middle of an Upgrade.
I Purchased a GA-Z97X-Gaming 5 MOBO + i7 4790K + ( GT740 SC EVGA " Not Fitted Card Yet ! " )
i Seem to be hitting Problems getting the Install Started and keep getting to a blank black Screen.
Here is...
So i'm new to Hackintosh. I'm running Win10 happily now, but i'd like to go OSX on my terms (hardware) and run Win10 alongside in dualboot.
At the moment i'm running my trusty Core 2 Quad Q9400 which is getting a little obsolete. I'm now modding a G5 case to fit my new system. I'm taking my...
I followed the TonyMacx86 guide and had no trouble getting 10.5 to install and boot using Clover as long as the USB key I installed from is in. I can restart as often as I like, not a problem.
I installed Clover with the same settings and all the kexts recommended along with the HD4600...
I managed to boot the Yosmite installer from UniBeast using these boot flags.
npci=0x3000 PCIRoot=0 PCIRootUID=1 cpus=1 maxmem=2048 USBBusFix=Yes nv_disable=1 GraphicsEnabler=No IGPEnabler=No "Graphics Mode"="1024x768x32@60" UseKernelCache=No -v
I then booted back into the UniBeast and tried...
Hello,
I've got a problem while starting setup. When he boot he always stuck at still waiting for root device.
I have read the last 24 h all about it. I tried very much things but nothing worked for me alsways same error at the same line.:banghead:
Thanks for any help
Dominik
Hi all,
i just built an Hackintosh for video-editing/color-grading pourpose:
MOBO: ASUS MAXIMUS VII FORMULA
CPU: i7 4790K
RAM: 32 GB (G SKILL F3-2400C10D-16GTX)
GPU: EVGA GTX TITAN 6GB
OSX SSD: SAMSUNG 840 250 GB
W7 SSD: SAMSUNG 840 PRO 256 GB
Using Clover, everything works fine (Yosemite...
Hey guys,
I recentled upgraded my mobo and cpu from a 3770k (and i forget the exact motherboard) to the config mentioned in the title. I know it’s a minor upgrade, but i needed to shuffle some things around and it is what it is. Prior to the upgrade the build was rock solid, but now i’m...
Finally got the last big error fixed with the Nvidia web drivers. My system seems to be running fine, it just takes a little longer to boot up, especially because of the IOUSBFamily error, since it keeps retrying. My system is using Clover as a bootloader, a Gigabyte Gaming 7 Mobo, and an i7...
Hi I am having trouble installing Yosemite onto the PC I just built that I intend on turning into a Hackistosh.
The part are am using are as follows: -
Gigabyte Z97X-UD3H Intel LGA1150 Z97 ATX Motherboard
Intel Core i7 i7-4790K CPU (Quad Core 4GHz, Socket H3 LGA-1150)
Corsair 32GB (4x 8GB)...
Hi all!
I've been saving and building my computer for months now and struggling to get it to work with Yosemite, but I finally have it up and running. I just need to get a few things working as well as ironing out some issues.
First and foremost, here are my core specs:
- i7-4790k
-...
Hello everyone,
I need some advice on what parts I should buy for my customac pro.I went down the list of supported hardware and I have found some myself.But since I have done my research on that hardware I can conclude it will possibly be too hard for me to build it with those...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.