Have a nice install going of High Sierra 10.13.2, only issue is I have to manually go into Clover options on boot up and select the checkbox for DeInit: followed by my GPU information (I've attached a picture).
If I don't select the box it hangs halfway...
ive been going in circles for the past week and im dying here please help me out
my build is a sabertooth p67 (bios 2302)
asus 290x direct cuii
two hdd 1 tb wd and 1 512 gb seagate
i used vm to boot to lion then downloaded yosemite and mounted a flash disk and created a bootable flash...
290x -Clover - Pro-Video Rig
Been following the TonyMac forums for the past several months now trying to get enough knowledge to attempt my first PC build/Hackintosh. My original build started with only recommended build hardware from the Buyer's Guide here - but while...
Hi, recently built a new rig with an R9 295x2 on the intel X99 platform and i was having issues trying to install OSX 10.10. I have windows installed on my machine and the 295x2 does a great job but when i try to install a x99 patched OSX 10.10 to another partition of my ssd, it always crashes...
Hello guys. At the moment I have:
Asrock X99 OC Formula Motherboard
i7-5960x overclocked @4.3 CPU
AMD R9 295x2
M2.ULTRA Samsung XP941
few Samsung 850 Pro
It is video editing computer for Panasonic GH4 (Premiere CC + Speedgrade CC mostly, Photoshop + Lightroom also) and gaming...
Ok, after days of playing around with this I was able to finally get what seems to be a stable Yosemite running minus some issues which are noted below.
UniBeast 5.01 to install Yosemite, not only have on monitor plugged in if you have two, and if the screen is flickering simply...
So, I finally got Yosemite working on my old ex58-ud5 motherboard with a radeon 290x and have almost everything working but when I plug in another monitor I just get two black screens and it never displays the Yosemite desktop, even when I have Yosemite up and running on one and plug in the 2nd...
Is there a good way to monitor GPU temps with the R9 290x on Yosemite? I was trying to get some benchmarks for my GPU and I noticed that only one of three fans on the card was running, and it was running pretty slow.
Unigine Heaven was also reporting my temp as 0C, which makes me think the...
I installed OS X Yosemite successfully on my PC with Radeon R9 290X.
However, I have a problem:
After the Apple logo, the screen flickers very strong, and sometimes the image is completely gone.
If I pull the DVI cable and plug in again, or if the PC goes to sleep (and wakes up...
So I was able to set up unibeast, and install Yosemite on my gigabyte ex58-ud5 machine that I had Mountain Lion on ages ago and thought I would try out Yosemite.
The install went well, some odd flickering on unibeast but unplugging and replugging got the graphics back.. note im running a amd...
first post on here, just looking for help. I recently purchased a i7 3930k and GA-X79-UP4, I'm trying to get them to work in hackintosh but cant seen too boot with out using the uni beast drive and -v npci=0x3000 cpus=1 GraphicsEnabler=NO -f
Is there anyone that can point me in the...
Nvidia is set to begin dropping pricing on GTX 780/ 770 to compete with AMD's R9 series. The yet to be released 780 TI is intended to compete with AMD's R9 290X, which some have called the "Titan Killer". The 780 TI will be taking the 780's price of $649, while the R9 290 is rumored to cost...
I was looking through the specs of the new Mac Pro after the AMD Hawaii event.
I thought it looked pretty similar since the back of the card is relatively the same.
Netkas also pointed out that there is reference to those cards in the AMD driver under Mavericks.
If the new Mac is loaded...