this is tony mac guide to configure usb ports, https://www.tonymacx86.com/threads/the-new-beginners-guide-to-usb-port-configuration.286553
i just did this finally but using an opencore tool explained here https://github.com/corpnewt/USBMap/issues/46
Sorry, missed this. Did you run it for like 12 hours or longer? If it's stable w/o errors then it suggests your system is OK, that is it's saying whatever is wrong may be software like operating system.
*Edit, and it's not testing disk so that remains suspect.
Crashing in BIOS is not good.
run memtest86, errors there mean either these or maybe more.
memory is bad
cpu bad (rare) overheated ( see temps in bios )
memory controller bad, motherboard problem.
I've run into bad memory before, overheating, overclocking too much, bending pins on cpu...
The advice from a couple pages back (look for Stork's posts) is to install Mojave and stick with it at least until MultiBeast for Catalina comes out. Mojave is still a very supported OS.
Actually, I've had 3 panic induced reboots now and a couple graphic freezes, mostly while playing a game that's under some crossover wrapper, world of tanks. One panic was during a reboot so I don't know that the game is related, maybe graphics are?
Re-installed the Emulated NVRAM version and...
Deleted files ( is a typo, /Volumes/EFI/EFI/CLOVER/drivers/UEFI/EmuVariableUefi-64.efi should be /Volumes/EFI/EFI/CLOVER/drivers64UEFI/EmuVariableUefi-64.efi )
Updated clover and rebooted, all is well!
Thank you!
The geekbench results on the first page are from geekbench 4, in the current version (5) they use a whole different scale. Also, my single core results went from 1000 to 1375 by quitting my web browser and all programs then running it.
Single core: 1375
Multi core: 7908
then I did the ez-tune...
The motherboard in the title of this thread worked for me, but you will probably have more luck following the specific instructions from a thread about your Gigabyte motherboard instead of this which is about an Asus. Try searching on
GIGABYTE Z390 AURUS PRO WIFI
there are at least two...
[ Edit * this should have been in reply to @pyr0hu but I failed the internet ]
The path listed in clover configurator isn't the path to config.plist in EFI partition, maybe you're not editing the correct config.plist?
You probably have but, might check compressed air on cooling vents to clear and checking cpu temps, might be cooling paste has fizzled away because some of that sounds heat related. Also memtest86 which is annoying to run buy cheaper than replacing it, sims do go bad on occasion.
My boot got slower when some clover update turned debug flag on in config.plist, just figured this out today and now it's back to super-fast boot.
https://www.tonymacx86.com/threads/solved-very-slow-clover-booting-on-high-sierra-hfs.248557
*EDIT* . the freezes came back, running memtest86 showed memory errors, so whatever's wrong is a physical configuration, not what I thought here
@mickelsn . It's been two days now using the older kext and I haven't had the disk access related lockups start that every time led to hitting the...
Started having disk freezes often with this configuration, some combination of new mojave updates and my SSDs and the chipset on this boards. Used the older kext from first page of this in /Library/Extensions fixed it, though I think the more proper fix is from the link 'new ICH patch by...
No, they would not become messed up invisibly, if some dialog popped up asking if you want to format unknown drives and you clicked yes, then they could be harmed.
I don't know about that video card but the rest does. Someone did a nice write up of their update to Mojave experience with this motherboard.
[ edit ] - oops, meant almost the same motherboard...
I don't have this problem, but there's a thread of those that have had it,
https://www.tonymacx86.com/threads/mojave-freezes-after-opening-app-store-application.264034/
So, it's all working fine just DPCIManager has issues? if so then probably DPCIManager needs an update. My built in HD4000 and video card both show up in system report and both work after update fwiw.
I get this on my real macs attached to dell u somethingerother at work via HDMI and have done this on two of them to fix it. It's that osx is seeing your monitor as a tv, apple lists some other things to try to get it to know it's a monitor but I don't think i had luck with them. This fix has...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.