Search results

This boot-args works also with the update 11.3 ?

I try to use the ssdt-spoof-gpu but doesen't work ( I don't know if isn't load on the system) My ACPI for the GPU is: My ssdt-spoof-gpu.dsl is: What I wrong?

This is my gpu : I try to load the kext of 5700 with a gpu-spoof-id.aml whit this code: DefinitionBlock ("", "SSDT", 2, "DRTNIA", "AMDGPU", 0x00001000) { External (_SB_.PCI0, DeviceObj) External (_SB_.PCI0.GPP8, DeviceObj) Scope (\_SB_.PCI0.GPP8) { if (_OSI...

The GPU Work but without hardware acceleration. If someone set the pci-id to 5700xt...can we use with hardware acceleration?

Thank you

It's a good start... what you have to set to work?

Edit

To test an hackintosh with the rx6900xt , it's possibile to run as you tell like 5700xt?

I try to use hackintool like you suggest: 1) Open Hackintool , USB , clean all , refresh 2) Plug all the USB Port (USB2 / USB3 / USB-C) 3) Clean the other port without green color 4) Generate the file (amd and USBPorts.kext) I try to use the USBPorts.kext , and after the reboot on the...

I think (but I not sure) the USBPorts.kext is the best solution also for opencore, that mapping your usb in a kext. I do the same, but also for me not working good

No, it's 2 usb ports and 1 usb C. In total is 3 ports. I never use the hackintool for do this work... sound good. I use hackintool for generate the ssdt to compile?

Hi I try to patch my usb because if I try to insert my iphone on a usb3 all port usb is disable for a problem with the energy. My laptop is chuwi aerobook plus and in total I have: 1 port usb2 / usb3 2 port usb2 / usb3 1 port usbc (with I set id 9 for a non reverse plug). All ports works, if...

I ask here.... A wrong patch for the battery with the MaciASL can cause burn of connector or burn of Battery?

I upgrade today, also the whatevergreen and update (compiled) the SSDT-PNLF.aml. After the reboot I haven't the brightness setting on the control panel of setting. What I have to do? Also i attach the log

I don't know but my trackpad works normally but I don't know if I can enable gesture...

Hi, I think the native power management of my cpu is working, but the CPU not going down from 1,2Ghz ( on the specs of cpu tell about 500mhz). For the boost it's ok 1.3Ghz. I don't know if i can modify anything to slow down and have less battery problem (the battery in about 2 hours it's off)...

UPDATE I think I found the problem for the wifi/bt... I remove the card and on one side is 1820A on the other side ( when remove the film) the name of the card is other... BCM94356ZEPA50DX_2..... I attach the photo of the 2 side: There is a solution for this?

UPDATE I think I found the problem for the wifi/bt... I remove the card and on one side is 1820A on the other side ( when remove the film) the name of the card is other... BCM94356ZEPA50DX_2..... I attach the photo of the 2 side: There is a solution for this?

I noticed a strange thing, I don't know if can help... If I check the kext used for wifi from hackintool it's tell me use a kext different.. not use AirportBrcm but PCI kext...

No , only broadcom ! See other post for the compatibility in the same section https://www.tonymacx86.com/threads/broadcom-wifi-bluetooth-guide.242423/