Search results

Hey folks, hope this is easy: my system isn't seeing software updates at all! I'm on OC 9.5 using a config @medianjoe posted to this thread earlier. csrutil shows SIP enabled; secureBootModel is Default; csr-active-config is <00000000>. I've reset NVRAM several times from the OC picker. An...

@medianjoe Thanks for the EFI, your EFI boots my Sonoma install. My 095 was pretty close to yours, I'll try to do a bit of analysis about what was different and why I was having trouble. I note that on Ventura, I would get a lot of (IIRC) WindowServer crashes, playing games, or just using a...

@medianjoe and others, thanks for taking a look. I don't have any progress unfortunately. I did turn off -v but no net change. I also tried installing to an HDD and setting the PCIE speed to Gen3 in the BIOS with no net change. With 095 (config posted above) I can boot my Ventura system...

Hi folks, hoping to get some troubleshooting help. I'm getting the graphics-go-to-black-screen issue after what looks like a successful boot. This is after a Sonoma update. I had a working OC 095 running Ventura on two NVMEs. It came from NATA's 088 updated using my best effort to 095. I booted...

Anyone on Sonoma with this hardware?

Spent a few minutes today and updated my EFI to OpenCore 0.8.6. However, in the first few minutes of using it, I have to say it seems to have issues. 1. On Ventura, after getting a login prompt and typing in my password, it goes to a blank Desktop and just hangs with a mouse cursor. I had to...

@sonny362 Thanks, that fixed it for me! I had a slightly different PciRoot and Internal@ value, once they matched your values, it worked! I don't even seem to need to modify the hardware settings; in Monterey I seemed to need to force it from automatic (which would do 2500baseT) to manual...

Hi @sonny362 thanks for the response, and others. I'm using OC 0.8.5, which I created by basically syncing the sample config plist in the 0.8.5 release back to the plist from @NorthAmTransAm 's 8.0 config posted in this thread. There are actually very few changes, mainly, they removed a few...

Installed Ventura and my machine (running this build except with a 6800 XT) doesn't see the Ethernet controller at all. Can't add it. Hackintool just shows the wireless card as en0. Any suggestions? Monterey on a second drive sees the Ethernet controller fine (did apply the force to 1000 fix...

I'll update to 0.6.9 but it's probably more like a week.

Make / Model of motherboard - Gigabyte Z370-HD3P CPU - i7-8700K OpenCore Version - 0.6.8 dGPU - AMD Radeon RX 5600XT 6GB (via agdpmod=pikera) Does sleep/wake work? - Yes Does EFI support OpenIntelWireless drivers? No Does restart/shutdown work? - Yes Does FaceTime and Messages work? - Yes Does...

Trashed my install. Not sure why yet, gotta research. Updated clover, updated kexts (I keep them in L/E), installed, and now it won't boot. Get's stuck in a boot loop trying to initialize GFX0 on my AMD GPU. Fortunately my backup boot drive lets me boot up. Edit: K I guess I neglected to use a...

iMacPro1,1 SMBIOS, APFS NVMe boot drive, kexts in /L/E/.. updated Clover to latest and AppleALC.kext, Lilu.kext and Whatevergreen.kext to latest using Clover Configurator, rebooted; initiated upgrade from Sys Prefs; rebooted twice auto selecting the right install prebooter from preboot option...

Hi all, it's not worth going down the official trouble-shooting files/post path because I'll be getting an rx 570 card in a few days, but in case anyone has some advice, here's my issue: was using 1060, but decided to jump to mojave with UHD630 iGPU. Using latest WhateverGreen and Lilu kexts...

Ok I was confused because you said you selected UEFI. Multibeast starts with UEFI and legacy. The nice thing about multibeast is that it creates a generic, safe (but unoptimized!) config.plist for you given a few inputs from you. Honestly I think it's a good place to start because it gives you...

Yep it's overwhelming. Sounds like you are trying to use Multibeast to create the stick? There are certainly a lot of options. There is contextual help, and there should be guides for z3xx series boards. The good news is a lot of Multibeast is optimization, and you don't care about that, you're...

So to be clear, your board is not recognizing that the NVME is bootable. The previous recommendations are good, disable/remove Optane (I don't know what that is, sounds like something specific to your hardware); try a different NVME slot (my board has two slots; on my z170 I had to use the "top"...

For what it's worth I've had clover updates break my build. I always update clover cautiously for this reason.

Welcome to the forum. You have provided lots of good info and a build in your signature so that's a great starting place. I have a GA 370-based system. In my case I had HS running on it. I disabled my nvidia GPU in the BIOS, swapped video out cables to the IGPU, updated clover, lilu.kext and...

I don't even understand NVidia's dev post about should Apple want help our engineers are eager to help. Did Apple ask for 10xx help? NVidia released those drivers as far as I know without any support from Apple. Definitely feels like no one is really taking ownership of NVidia drivers for...