Me here too for this problem.
First post here, hope it's fine!
My Config:
B550 Master
RX 550 Pulse 2GB (LEXA)
16gb 3600 Ram
NVMe 970 Evo Plus
My Config it's not getting H264.
Tested with VideoProc, VDADecoderChecker
VDA Error:
-12473
Already followed Opencore Guide for fixing DRMs.
Spoofing...
@pastrychef,
the kext you linked doesn't fix fan of my Vega 56 Pulse.
Now I injected all the power tables presents in my windows reg but either doesn't solve my issue.
Playing a Video with IINA slow my fans.
In Windows ,all is working correctly, injecting the same properties & PowerPlay tables...
Hi @pastrychef,
How you solved the High Speed Fan in Vega 56?
I tried almost every softPowerPlay Tables,Vega kext from chinese app and also manually changing AMD10000Controller.I also tried stock power table extracted from VBIOS but doesn’t work.
I can modify fans but they aren’t going to slow...
hi @toleda ,could you help me to achieve power management on my Vega 56?
No AGPMController under Vega IORegistry.My SMBIOS is iMacPro1,1.
I injected a PowerPlay Table in AMD10000Controller & freqvectors in X86PlatformPlugin.
I’m using connector-less IGPU platform-id for my UHD-630.
My Specs...
Hi @RehabMan,
I use your Bitbucket-precompiled FakeSMC+Sensors & also compiled myself.
I literally tried everything, also using HWSensors3 and this build show correct values but not fan readings.
I tried iStat,HWmonitor - same results over programs & Mojave,High Sierra.
My incorrect Values are...
Thanks so much for your support & time @pastrychef.
Also I have another question,I want to build a Guide here at tonymacx86,is there a format doc for writing a guide?
How you entered in Golden Builds?
I am using H100iV2 with EK Vardar FF5 connected to a Y PWM splitter.
Max pump +12V (checked)
In windows same Temps but fine rpm fan curve.
If can help, I use iMacPro SMBIOS with MacbookPro15,1 frequency Vectors.
My 8700K goes up to 80 C...(here ambient temps are around 37 C)
No Delid,stock freq,LLC Level 3,MCE OFF,XMP 16-18-38 1.35V DDR4 3000MHZ
Also can't monitor cpu vcore(show 0.544V at max TDP)
I think some FakeSMC not already updated.
I settled my fans to goes to maximum at 70C,but are around...
Hi pastrychef,
I completed my build in macOS Mojave,but I can't figure why my CPU fans can't go to desired BIOS settings (on High Sierra it was the same).
In my BIOS I set my fans at 70 C- 100% but after boot macOS takes control of the fans.
I can see that at 70 C my fans are 2200 rpm with...
I’m having black screen after boot with my vega 56 and also with UHD630.
Now i’m not using WhateverGreen.
So no audio in DP or HDMI,can’t enable it,even if it is in GFXHDA kext IOPropertyMatch.
Can’t figure how i can enable it.
Now i want to try connector-less UHD630,but in...
Hi @pastrychef ,my Vega 56 is listed as PCI@0>PEG@0>PEGP@0
What I should inject for GFX0?
(PEG@0 or PEGP@0)
I updated my system to New HS Build,I properly injected coffee lake ID but my HDMI is covered by a pink color, what can I do?
Also new WhateverGreen+Lilu gives me black screen after boot...
Hi,I have a Vega 56 & Intel UHD 630
0x3E92.
I updated high Sierra to build 17G2112.
I removed IntelGraphicsFixup,WhateverGreen.
My UHD is fully recognised by macOS without injection(only on HDMI show me pink/purple screen,on DP work without issues)
I am using iMacPro SMBIOS,with FrequencyVectors...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.