Search results

Where can I find that?

I ended up buying one of those cards and I can confirm continuity camera is working, and you don't need any Bluetooth kext and no Airportbrcmfixup kext either, works just like the Fenvi PCIE cards I have for the desktops.

Does anyone know if the DW1830 Wifi card (BCM943602BAED chipset) needs the AirportBrcmFixup.kext and (and its plugin AirPortBrcmNIC_Injector.kext) I tried it both ways, following this guide, but the first page of this post saying it's not needed...

Just confirming, continuity camera is working as well, not getting black screen?

Does anyone have this card and confirm that the Continuity Camera works in Sonoma with OCLP patches? Considering buying this, but if it's not working I have to go with a real MacBook wifi card with an adapter, this is for a laptop, I have both the Fenvi T919 and HB1200 for my desktops and the...

Try this for Bluetooth https://github.com/OpenIntelWireless/IntelBluetoothFirmware

According to the Asus site, and assuming that you haven't changed it, it is Intel you can try the kexts from here. https://github.com/OpenIntelWireless/itlwm/releases/tag/v2.2.0 If you are running Sonoma https://github.com/OpenIntelWireless/itlwm/releases

If you are using OCLP, software update will automatically tell you to download the full installer, you have to revert the OCLP patches and restart and possibly clean your NVRAM and then you can do the smaller size incremental updates

The only thing I can think of to set the MinKernel, see attached

I just read miliuco post replacing the IOSkywalkFamily.kext with the newer version fixes the slow boot time and the OCLP can apply the patch now Thank you miliuco greatly appreciated

After updating to 14.4 boot time became 4 min, instead of the usual 30-40 seconds, I found if I removed the Airportbrcmfixup.kext boot time was normal of course I also lose Wifi, also OCLP 1.4.1 says there are no patches available, previously system worked fine with OCLP patched under 14.3.1...

Does anybody know if this should work with dGPU or just iGPU? I have everything else working but the continuity camera, I don't have iGPU, running with RX 580. Thank you.

Anyone tried this with Broadwell or Kaby Lake, have 2 HP 250 laptops with those chips and HDMI out is not working, which previously worked with Ventura, followed the HDMI framebuffer patching guide, tried pretty much everything and I'm out of ideas. Anyone has any clue, what changed in Sonoma?

Ok, I figured it out, if you put the .disk_label.contentDetails file into EFI/Microsoft/Boot folder, Opencore displays whatever name you had in that file at the picker

I did but it still shows just Windows instead of what I named it in Windows Explorer. Also I only have 1 EFI folder, I only have 1 drive.

Does this work with the Windows partition label in the picker?

Is there a way to have just the name of the boot entry changed in the picker without doing a custom entry, I noticed that custom entry breaks the startup disk behavior, opencore won't boot from the selected os or at least not if the selected os is the custom entry. Not sure where Opencore picks...

So, I was able to add a boot entry for opencore that my laptop can see and I can select it as a first boot device. I used an app called EasyUEFI, but you can probably just do it with the bcdedit command, for me it was just easier to do it with the app, although learning bcdedit is probably...

Doesn't the new entry supposed to replace the original windows entry opencore picked up, for me it just created another entry, so now I have 2 Windows entries and I just wanted 1 Am I doing something wrong? I attached my EFI folder Never mind, Had to change scan policy so it doesn't pickup the...

Thank you, I think I figured it out, the reason the startup disk is not working is because I had to rename bootmgfw.efi to bootmgfw-orig.efi, otherwise the system only boots Windows, and this is an HP laptop so I can't select the EFI folder as a first boot device, it does show up on the boot...