Search results

I just got a thermaltake engine 17 from Amazon. Before I clicked on buy, I did measure the space from the motherboard to the case and it is about 17.5mm to 18mm. Well, the heatsink alone on thermaltake engine 17 is 17.1mm and there are some space between cpu and motherboard. Therefore, it is too...

Oh, I do have an Asus H110t/CSM running Windows 10 now (but move to Asus H310T/CSM for 2280 M.2 SSD support). It seems the 2-pin power input does support DC 12V (Please check the h110T/CSM manual) but I don't know where you can get the adapter to cover the 4-pin ATX CPU from PSU to the two-pin...

I use some regular HP laptop power adapters that work great. But the power adapters only supports 45W-65W as I remember. I have a i3 8100t that has TDP 35W and the 45W-65W power adapters are good for me. Yes, the H310T/CSM mother boars itself has a 12V/19V power connector but I never use it to...

My DP on Asus H310T/CSM actually work great without too much configuration with SMBIOS Mac mini 18.1. After I found this and other threads talking about the problems with HDMI port and I start to take a look at these issues. At the end, I found the HDMI can works with EDID ejected, but my DP...

Yes, I agree with you. The internal SSD soldered inside the 2018 Mac Mini kills my desire to buy it. I knew you can use TB3 external SSD to run OSX. But a dead SSD might stop the system from boot (Happed on my Asus H170i-Pro/CSM with a dead SATA M.2 SSD) then you have to ask Apple to fix it...

If you plan to put Asas H310t/csm inside a Mac mini case, you should get a 35w CPU like i5 8500t. Search Mac mini 2011 buid andyou will see other threads using Mac mini case. I did use Asus H110t/csm with i5 7500t. Cooling indeed is a major issue. I printed two bottom covers and found it is...

Just did a simple design with Thinkercad for the bottom cover. My son used Soildwork to design the backplate of motherboard and I printed them with CR-10 printer. Might change to internal bower fans and redesign the bottom cover.

Sorry for the late reply since I don't get back to check this thread. Yes, I did use Dynatron t459 heatsink but you can't use the original lock screws and CPU cooling fan. I cut a 1/4" case acrylic sheet with Dremel rounding tool to be the back cover. At the same time, I put two 60x60mm fans on...

Other than laptop, only thin itx or mini-stx use SO-DIMM memory. I just built a Mac mini using Asus H110T/CSM with i3 6100T. The only issue is Intel HD 530 won't wake from sleep (a known issue for HD 530).

I just got the motherboard tray with open I/O from him. Then I cut I/O holes out of an acrylic sheet for Asus H110T/CSM and will hot glue it to the opening. If I want to change to a different motherboard, I can take out my customized I/O plate and build a new one for the new motherboard. At the...

My USB drive is USB 2.0 and I didn't see any difference on other motherboard. But I am not sure that will make any difference. Actually USB ports work quite well on Asus H110T/CSM and my other Asus H170I-Pro/CSM with USBInjectAll.kext. Here is my config.plist with a new SMBIOS profile. You can...

I have an Asus H110T/CSM and installed OS X 10.12.3 with USB drive created by the latest UniBeast with default easily. Read Skylake guide and check your BIOS options. Once you install OS X, you need to apply 1 to 2 patches for HD 530 (depend on the SMBIOS you select).

Asus H170I-Pro/CSM also has a displayport that can also support 4K@60Hz. If sleep isn't a must-have feature, then Asus H170I-Pro/CSM ($119) will be good enough (The Wifi NGFF card should be replaced).

Asus Wifi Go! Module for Asus H170I-Pro/CSM uses Qualcomm Atheros QCNFA364A that won't be supported by OS X as I knew. I bought a BCM94352Z and swapped them. You can get a BCM94352Z on eBay around $23. It is easy to take out the Asus Wifi Go! module and swap the NGFF wifi cards. You can search...

If you buy ASRock Fatal1ty Z170 Gaming-ITX/AC for HDMI 2.0, then you will be disappointed. OS X won't support HDMI 2.0 yet (as I knew but not 100% sure). It has some sleep issues in Windows and even won't stay in 4K@60Hz in my HTPC. I added a Nvidia GTX 1050 in order to make my system more...

Google ... "If you get this error while trying to install Mac OSX on your system then it means your RAM stick isn’t inserted into the correct RAM slot. You need to move at least one of the RAM sticks into slot zero of your motherboard, this is usually the slot nearest to the processor." Maybe...

Ye, I knew that now. After trying BIOS 2.10 and 1.80, they don't make any difference in OSX. But Windows 10 will crash when waking up from sleep with BIOS 2.10. Therefore, I will stay in BIOS 1.80 for a while. Thanks!!

Well, it works when I switch to the HDMI port that closes to the PS/2 socket. That is so embarrassed. Am I wrong from the beginning about the location of HDMI 2.0 and HDMI 1.4a ports? Thanks for your help and your config file did work!!

Yes, I knew only the HDMI port above the displayport is HDMI 1.4a. The other one is HDMI 2.0 port that should not work. After I switch back to BIOS 1.80, the gray flashing screen after wake up from sleep in windows 10 was gone (with drivers from ASrock website or Intel). The BIOS 2.10 did make...

Thanks. What is the Video RAM size you configure in BIOS? I followed this guide and set it to be 128MB. If nothing works, I will switch back to BIOS 1.80 and see any difference.