Search results

thanks im still on 10.9.5 havent quite made it to 10.10 yet but that worked and seems to be working well.

So SLI is not supported how does Mac utilize both cards? is it just two separate cards used for monitors or is one just kind of non existent? Im about to upgrade my graphics and want to sli for windows gaming. Would it be beneficial if i have multi monitors

https://www.cindori.org/software/trimenabler/ This is what i used for my sisters macbook pro 2011 after i swapped her hdd for an ssd. it worked and seems to be working well. I am about to clone my HDD to an SSD. Has anybody else used this with there build and did it work for them?

yes im about to just do a reset to default setting and change what needs changed and see what happens EDIT- Im an idiot i figured it out wow

So my watercooled GTX670 was running very hot, so i took it out and fix the waterblock and radiator. I changed my graphic in my bios to HD3000 instead of the 670. after doing that mac would not boot. I got the 670 fixed and changed the setting in my bios back to what i have had set for over a...

im pretty sure that the 770 mem has a high clock double check with asus on there website but i would not worry about it if you have tested in windows before installing OSX. I checked all my overclocks and settings in W7 before installing OSX and OSX says im running a core voltage of 1.635 and...

Any help at all would be AWESOME ive had to use my install usb to boot into mavericks.

me too

I have tried installing chimera 2.2.1 a couple times and a couple different ways. I have an ivybridge hackintosh and on 10.8 I had chimera working and when I wiped and reinstalled mavericks I haven't been able to boot unless I use my USB drive. I have multiple drives. Mac 1tb is the primary...

mine is on my 3rd party sataIII controller and the other hdd i have hooked up to it works fine. I installed the patch in multibeast to use those 2 sata connectors

i am having the same problem have you been able to correct the problem

I want to change the size of my hard drive so i can clone it to an ssd. I have a 500gb hd and want to resize the main partition to 119gb to fit the 120gb ssd i own. Everytime i try to resize the partition it tells me verification error. I dont even have 40gb worth of data on the hdd. any help...

shafty's Frankenstien I7-3770k - MSI Z77A-GD65 - 16GB Ram 2133mhz - GTX 670 MSI Z77A-GD65 Motherboard http://www.amazon.com/dp/B007QWIA52/ Intel I7-3770K Processor http://www.amazon.com/dp/B007SZ0EOW/ Gigabyte Nvidia GTX 670 2gb OC edition http://www.amazon.com/dp/B0080I06WQ/...

I have tried using my hd3000 on my i5 2500k and I have also tryed With my 6850 before and after deleting the kext. Anybody have any suggestions

I run the same temps as in win7 running cpuz, hw monitor is dead on with that and with my graphics card, my mobo shows CPU temp and that also matches win7 At idle shows 38C and I haven't seen it go over 52c, I have yet to get a benchmark on it, waiting for cable internet so i can dnld a...

Msi z77a-gd65

So I installed hw monitor and I am over clocked to 4.2ghz with my vcore set on auto. Hw monitor shows my vcore at 1.624 is that bad should I manually set that. In windows with cpu-z I am running at 1.25. Why such the increase? I7 3770k MSI Z77A-GD65 GTX 670 16GB 2133mhz ram

I got it working finally and I don't have internet right now so I boot for IB is all I got

I can install 10.6.3 and it will work no problem. But when I try to do the combo update to 10.6.8 it gets to the very end where its moving the new installed items or a min left and kp's. I have tryes using update helper and without update helper. I just need to make a new 10.8 USB so Im not...

I have a gigabyte z68ap-d3 rev2 with a 2500k cpu. I'm running off my hd3000 graphics with 4g of ram at 1333mhz. Also I have 2 DVD drives. My problem is I can't get iboot to read my 10.6.3 retail dvd. Is it because I'm using ivy-bridge iboot or am I just slow today. Also I have my bios stock...