Hello,
I successfully built my Mojave upgrade.
I'm having trouble finding a PCIe card that works with this build for an extra USB 3.0 19-pin slot (my chassis has two cables, and the motherboard only has one, and I thought I'd be able to simply plug in an extra PCIe to take care of the second...
A few weeks ago I successfully upgraded from Yosemite to El Capitan 10.11.3.
For the longest time I've used Chameleon and have had little to no trouble with it. I had attempted installing Yosemite using Clover when Yosemite was first available, but that threw tons of errors at me and it seems...
My build is as follows:
M/B: GA-Z68X-UD3H-B3
Processor: INTEL i7 2600K QUAD CORE 3.4 GHZ LGA 1155 PROCESSOR SANDY BRIDGE SR00C 64-bit
GPU: GIGABYTE ATI Radeon HD6870 1GB DDR5 2DVI/HDMI/2x Mini DisplayPort PCI-Express Video Card GV-R687OC-1GD
My original install, i was able to use the...
My specs are:
M/B: GA-Z68X-UD3H-B3
Processor: INTEL i7 2600K QUAD CORE 3.4 GHZ LGA 1155 PROCESSOR SANDY BRIDGE SR00C 64-bit
GPU: GIGABYTE ATI Radeon HD6870 1GB DDR5 2DVI/HDMI/2x Mini DisplayPort PCI-Express Video Card GV-R687OC-1GD
Error:
I was able to successfully install and run...
Hello,
My build is:
MB: GA-Z68X-UD3H-B3
Processor: Intel i7
I am using: Clover Bootloader
I am attempting to install: Yosemite 10.10
I am upgrading from originally: Lion OS X 10.7.5 (not sure if that matters since I wiped the startup drive for this to install Yosemite)
I followed...
After updating to 10.7.4, my hackintosh has been thinking it's a Mac Mini.
That is, when I go to the system profile, the summary says:
Model Name: Mac mini
Model Identifier: Macmini5,1
Processor Name: Intel Core i7
How can I change this to a mac pro?
GA-Z68X-UD3H-B3/Radeon 6870 Won't go to sleep after 10.7.4 update
Hi,
I've been searching around for this, but so far any sleep problems seem to be related to waking AFTER sleep.
My hack actually won't go to sleep to being with. It will go to sleep for about 5 seconds before starting up...
Hi,
I recently got a third monitor, AND upgraded to the 10.7.4 update.
At first, I was able to use the three monitors all together PERFECTLY. I had one active Mini DP to DVI adapter, and the other two hooked up to the DVI ports on the GPU.
I made a few changes:
- Noticed that...
Hi,
Problem:
Sleep mode not working for some reason. Worked fine before.
When put to sleep, the computer sleeps for about 5 seconds before it wakes up again.
This is my current setup:
- Motherboard: GA-Z68X-UD3H-B3
- CPU: Intel Core i7
- GPU: GIGABYTE ATI Radeon HD6870 1GB
I'm not...
I keep getting the following error:
Your device or computer could not be verified. Contact support for assistance.
I realize this is a known issue, and I have tried several of the "fixes" I have found, including:
- PCIRootID = 1
- PCIRoot = 1
- EnternetBuiltIn = Yes
- Deleting...
Hi,
Here's my setup:
Mobo: GA-Z68X-UD3H-B3 (F11)
Graphics: GeForce GTX 460
It's stuck on 1024x768 every time I boot up into OS X, and there is only 1024x768 option in the Preferences > Display panel.
I have both DVI cables plugged into the graphics card, which is plugged into the first PCIe...
System: GA-Z68X-UD3H-B3
CPU: Intel Core i7
Graphics: GeForce GTX 460
This doesn't actually FREEZE when I'm booting into OSX Lion, but this is the error I get:
mac_swapon SUCCESS
Waiting for DSMOS...
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement)...
I'm booting into my OS fine, and all the installs seem ok so far.
But as soon as I plug in my graphics card, the GeForce GTX 460, and boot up my computer, I get a freeze when I try to load the OS.
It gets to:
Sound assertion "0 != createAudioEngines ( fPathMap_aDriverInstance )" failed in...
Freezing on reboot - com_lnx2mac_RealtekRTL81xx
Hi,
I'm not 100% sure what kinda kernel panic this is, but my screen is freezing at the following error:
com_lnx2mac_RealtekRTL81xx: Ethernet address 50:e5:49:c9:4a:01
Screen pic included.
Any thoughts?
Hi!
I get to the Disk Utility portion of the Unibeast boot, but all the shows up on the left side is my USB stick that I used to boot Unibeast with. My SSD does not show up.
I already set up my BIOS to boot first to USB-HDD, and then to Hard Drive second.
My GA-Z68X-UD3H-B3 motherboard is...
Hi,
I tried running UniBeast using a USB with bootable Lion OS X, but got to the summary page where there was the following error:
"The following install step failed: run postupgrade script for multi-1. Contact the software manufacturer for assistance."
I'm running UniBeast on Mac OS Leopard...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.