Search results

Loading Google Results...
  1. michust

    macOS 10.12.1 Update

    What a nightmare! I tried to upgrade my 10.11.5 direct via AppStore to 10.12.1 on 2016-10-27 1. Installed newest Clover 3882 as recommended 2. Downloaded newest Nvidia Web Driver 3 . Upgraded OSX to MacOS -> great everything works, system boots alone This is a big step forward!!! And then: -...
  2. michust

    .:: Multi-Boot Tips & Tricks ::.

    Thanks for the tip , I'll give gdisk a try. And for the UEFI: If you are able to tell me which OS-X capable mainboard/cpu (wo. patch nightmares) is really faster, I think about a Dual Xeon 2011V3, then I will swap, but as long as I do not found such combination. I run my fully watercooled...
  3. michust

    .:: Multi-Boot Tips & Tricks ::.

    I am trying to setup a triple boot: to append my dual boot OSX/Windows with a Linux boot. Disk0: OSX + Chameleon Disk1: Windows 7 Disk2: Ubuntu 14.04 Following the guide from the link. Each time I partition the Linux ext4, gptsync tells me afterwards the partition is unknown and therefore...
  4. michust

    NVIDIA Alternate Graphics Drivers (346.01.02f04)

    On GTX 970, i7-980, Chimera, works without issues so far.
  5. michust

    NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01) with 'Maxwell' GeForce GTX 970 an

    Just plug the second monitor in, should be auto-detected. Open SystemPrefs -> Displays and arrange as you like. Arrange is only shown on the main monitor Scaling and Color Setup is indivdual on each monitor
  6. michust

    System Not Allowing NVIDIA Web Drivers

    Try newest web driver and do not use MacPro 6.1 as settings. NVIDIA does not allow an installation on a MacPro 6.1 (for the very good reason, that a NVIDIA is not possible on a MacPro 6.1)
  7. michust

    gtx 970 in osx 10.10.1

    And don't forget to check in: org.chameleon.Boot.plist <key>Kernel Flags</key> <string>kext-dev-mode=1 nvda_drv=1</string>
  8. michust

    GTX 970 HDMI no signal

    Hmm, I saw this NVIDIA/OSX HDMI not working all over the places here with TVs connect, mine is not a TV it's a "normal" LCD display.
  9. michust

    GTX 970 HDMI no signal

    I can confirm that my GTX970 is working HDMI-2-HDMI with my LG 31MU97 including sound without configuring something special. All resolutions I tested FullHD to 4096x2160@30Hz worked without any issue. So I would say it is not OS X, not the NVIDIA driver and not the GX970. OS X starts...
  10. michust

    NVIDIA Releases Alternate Graphics Drivers for 10.10.1 (343.01.02)

    I have HDMI running on my inno3d GTX970 (f2 driver) if "still" means the since f1/f2, then I would say the driver is not the issue. My monitor is a LG31MU97 and the resolution was set to 4096x2160@30Hz (max. for HDMI 1.4, which is the input spec. form the monitor), I tried also other...
  11. michust

    Going crazy trying to get my GTX 970 recognized in Yosemite.

    No never, only about 2sec darkness because of new resolution. After Apple logo the monitor switches to the native resolution just before the login screen appears. I saw the same in other threads, have you tried to switch off / switch on the monitor after booting OS X?
  12. michust

    Going crazy trying to get my GTX 970 recognized in Yosemite.

    My GTX970 worked with a HDMI to HDMI cable with my monitor but "only" 4k@30Hz" http://www.tonymacx86.com/graphics/151489-success-4k60hz-lg-31mu97-osx10-10-1-a.html Since 10.10.1 OS X seems to have basic support for the Maxwell chip (soft render by 1280x1024) which helps for boot and the...
  13. michust

    Graphics glitch on progress bars

    So same situation then me, the "low resolution" tag means that OS X will set this physical resolution to the monitor and the monitor does the scaling to its native resolution. Without this tag OS X will use the native resolution of your monitor and does the scaling (Retina mode). If I...
  14. michust

    Graphics glitch on progress bars

    Apple is identifying only Apple displays as Retina displays. If you like to see Retina resolutions in Displays Prefs.: Open a terminal session and enter the following: sudo defaults write /Library/Preferences/com.apple.windowserver.plist DisplayResolutionEnabled -bool true After...
  15. michust

    Graphics glitch on progress bars

    IGPEnabler, I know (it works not for me either because my I980 is a old 1366 socket type without any GPU in it) but this was the graphic related difference between our setups. The display issue I saw in other threads also, here in the forum, but don't remember where. How is the Monitor...
  16. michust

    Graphics glitch on progress bars

    My Boot.plist shows like <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>No</string> <key>IGPEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>kext-dev-mode=1 nvda_drv=1</string> <key>Legacy Logo</key> <string>Yes</string>...
  17. michust

    Success 4K60Hz on LG 31MU97 with OSX10.10.1

    Sorry, because I'm using it only under OS X for photo works, I did never compare both OS. I have no application for Photos under Windows, Windows is only my gaming platform, the Monitor is even not calibrated under Windows and against the wording from LG(as far as I understood it) the...
  18. michust

    Graphics glitch on progress bars

    Hi I am running a GTX 970 with LG 31MU97 4K@60Hz. I just rebooted but I don't see the glitch. If I remember right I had same while upgrading from my GTX580 with a 1920x1200. Is GraphicsEnabler=Yes should be =No If Yes you will face while booting that this boot bar turns after 30%...
  19. michust

    Success 4K60Hz on LG 31MU97 with OSX10.10.1

    Hi all My system is: GX58 UD5 I7 980, 24GB RAM Nvidia GTX 970 4GB MB, CPU and GPU are water-cooled 256GB SSD OSX 256GB SSD Windows 7 1024GB SSD Data LG 31MU97 4096x2160@60Hz, connected with DisplayPort 2 MiniDisplayPort cable. The LG 31MU97 is a pre calibrated Monitor from LG...
  20. michust

    My Hack with Dell UltraHD (4K) Display

    Hi Any updates on this topic? I plan to update my actual photo workstation with a Dual 4k configuration, with 2 GTX-760 in SLI, but a 60Hz refresh would be very nice... best Michael
Back
Top