Search results

Sorry for the delayed response, I had to switch back to windows to get things done. I attached a couple of screenshots about the network config to this post. @manny_c I already I did disable SMB signing, and found the recommendation somewhere about the sendfile and put it in my config. I...

I cannot move the NAS nor my PC and they are far away (as far they can be in a home environment) from each other. But based on the windows results I wouldn't assume that it matters much. But non the less I'll try with the macbook just for curiosity. Also I've attached the ioreg to my previous post.

Blackmagic is not a network benchmark tool indeed, but basically it's testing the connection for what I would use it so it's a perfect test for it. And if I copy something using finder, I can see the same speeds. This is just a bit more nice representation. I haven't tried to connect the pc to...

Yes, under windows everything is fine, that is why I posted those Windows screenshots to have some comparison and for testing that this is not a network or hardware related problem. My problem is when you look at the blackmagic speed test which was done under Sierra you can see in megabytes...

Hi, Thanks for all the messages. The MTU is the same for both computers, even though it's just 1500, same as under windows, there I got the right speeds. I disabled the "other" protocol when I tested afp and smb, so only one of them was active at the time. I'll be more than happy if I can copy...

Hi, I'm on a fresh install of 10.12.5. I'm using a Synology NAS for file storage. Under windows I got around 100Mb/s read and writes. With Sierra I got: 930 Mbit/s "write" and 53 Mbit/s "read" raw speed measured by iPerf 100 Mb/s write and 8 Mb/s read using AFP 62 Mb/s write and 3 Mb/s read...

Thanks for this useful topic. Just finished installing sierra on my new rig. The key things for getting the web driver working for me were, setting the system definition to 14,1 or 14,2, putting the -nvda_drv=1 flag in the NVRAM section in clover configurator, setting up the new NvidiaWeb...

I think he was referring to a bad clover release. I had the "luck" to try that, it was r2988. I just wasted two days of my life to try to make it work. When the r2999 came out suddenly everything started to work...

My result under 10.10 with my i5 3470 + AMD 7790 and the 7790 alone.

I have 8 gbs of memory and i think this is the max for the probook and i don't think the 2gen i3 is an older CPU. Im almost certain the problem is the HDD. And yes an SSD would be much faster but it const 1/4th of my sallary :)

I use my 4530s for work in a windows enviroment. Its absolute perfect and this is the only operating system on my pb. Everything working as it should be (BT, wifi, webcam, dual display). My battery also lasts longer. My only problem is i had to switch my 7200 rpm hdd to a 5400 rpm one and now i...

I have a 4530s i3 and with mavericks my battery lasts about an hour longer.

Small update about my issue: I did some googleing and someone mentioned it both the AMDRadeonX4000 kext and AMD7000Controller.kext have to be edited to contain my card PCI id. In the x4000 kext it was already there and i inserted to the 7000Controller kext. Now i can't even boot in safe mode...

Hi! I just finished installing my Mavericks but I have no luck with my ati 7790. Is this card supported by mavericks? I can only boot with -x. In the system log there are errors regarding the amdRadeon kext: Oct 24 12:11:14 localhost kernel[0]: Kext com.apple.iokit.IOAcceleratorFamily -...

Ahh, never mind, I solved it. You give me hint about the partition not beeing active, so I ran fdisk with the selected drive (in my case /dev/rdisk0) and -e option then marked my first partition active with "f 1". Then write out and after a reboot everything is back to normal.

So: 1.) I can't boot from my hdd. 2.) I will get some live CD and then try this. 3.) the end of all three matches with 55aa FYI: I created the USB installer using unibeast and used it.

Here you go: localhost:~ doncarlos$ diskutil list/dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *320.1 GB disk0 1: EFI EFI 209.7 MB disk0s1 2...

I have to partitions, one 280 gb for the system and a 40 gb for some files.

I updated my 10.8.5 to 10.9 and everything is working except my bootloader. I tried to reinstall it with the probook installer and with chameleon wizard but i always got the "install an operating system" on boot. I only can boot with the installer USB drive. What can be the problem? Before...

I bought an SSD drive to my desktop computer and before i installed windows on it i done a fresh ML install. I copied the vanilla 10.8 bluetooth kext from it and installed to my original system. Then ran the combo update and now it was successful! With the completed update I have my original...