Search results

I had similar issue where only some drives were showing in the picker. Everything worked ok with 0.7.1. I fixed it by changing GlobalConnect from false to true: <key>UEFI</key> <dict> <key>APFS</key> <dict> <key>GlobalConnect</key> <true/>...

Same mobo, same (similar) issue. In clover 5122 with catalina 10.15.7 and iMac13,2 wifi is good. I have genuine apple AirPort Extreme brcm32xx on a pcie card. reboot into same macOS from opencore efi with MacPro6,1 and everything works except wifi. I don’t have any acidanthera Brcm related...

I use Mac13,2 with a 2500K on a GA-Z68 built-in HD3000 disabled, EVGA GTX650TI dual display

Toldea - thanks, I know the snb-platform-id is a device property setting in config.plist and not ig-platform-id There must be something missing. Everything works just fine with IGFX as primary in BIOS, but not when PCI primary with no other changes. I have moved away from using DSDT...

Toleda, thanks for the reference. Everything I have checks out with this guide, with the exception of the following For HD3000, the guide recommends in the DSDT: HD3000: as above for AAPL,ig-platform-id edit AAPL,ig-platform-id to AAPL,snb-platform-id edit 0x07, 0x00, 0x62, 0x01 to 0x01...

I have been using my Intel HD 3000 as the primary display adapter (DVI) with an NVidia GeForce GTX 650 TI (Dual DVI). Recently, I wanted to switch around to get better display resolution on the Clover boot manager screens and use the NVidia GeForce GTX 650 TI as the first, or primary adapter. I...

At first I couldn't figure out why this wouldn't work OOB, but with the use of contitool.sh I discovered my board-id was not whitelisted in the AirPortBrcm4360 kext binary My config: GA-Z68A-D3H-B3 motherboard, Core i5-2500K BCM94360CDAX Airport card http://www.ebay.com/itm/192015679097 PCIE 1X...

I purchased this card http://www.amazon.com/gp/product/B00JFR2H64?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 and this front panel http://www.amazon.com/gp/product/B00J4EZE4U?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 The Inateck card works flawlessly based on FL1100-100...

It's definitely a driver / kext issue with the chipset as everything works fine on the same machine with Ubuntu LiveCD. I will probably get either one of these: http://www.amazon.com/Inateck-Express-Connector-Controller-Internal/dp/B00FPIMJEW/ref=cm_cr_pr_product_top?ie=UTF8...

It's the Etron EJ168. I don't believe I have any kext installed specifically for EJ168, maybe I should ? USB 3.0 devices (flash drive) work when directly plugged in to the USB port, but not when I insert the 3.0 hub and plug the flash drive into the hub.

Rehabman, thanks for your confirmation - you are a great resource! So, with some experimentation, the hub works fine in USB2.0 ports and USB devices are visible/accessible through it. When I plug the hub into a USB3.0 port, the hub appears but no USB devices will appear when plugged in.

Pieroman, My SMBIOS is iMac12,1 and I have a patched DSDT with an Intel HD3000 patch (to fix identification as HD 2000 and be able to use the native kexts). I'm starting to think that I have too many USB ports ? I read somewhere there's a limit of 15. In I/O Registry Explorer, I have...

I have a clean install of El Capitan 10.11.1 with Clover, with the following kexts in CLOVER/kexts/10.11: - AHCI_3rdParty_SATA.kext - FakeSMC.kext - NullCPUPowerManagement.kext - RealtekRTL8111.kext - realtekALC.kext Everything in /S/L/E is vanilla My USB 3.0 ports (x2) both work...

That's right I was referring to the HD3000 IGPU. What's the Graphics card you are trying to get HDMI working for ?

The default frame buffer output table does not include outputs for HDMI, so in effect it appears HDMI does not play well. That's what the various patches to the frame buffer enable - HDMI outputs. Glad you are up and going!

This usually happens when FakeSMC.kext is not installed. Can you post the following info: 1. EFI/CLOVER/config.plist 2. Contents of EFI/CLOVER/kexts/10.10 3. Contents of EFI/CLOVER/ACPI/patched 4. EFI/CLOVER/misc/debug.log

You don't need a dongle. The suggestion was to prove that the DVI and VGA ports are hardwired, that's all. I believe you will only be successful with 2 displays with: 1. HDMI + DVI 2. HDMI + VGA DVI+VGA will only mirror the DVI on the VGA output as they are hardwired on this mobo.

Biz, HD3000 can do up to two displays. (HD4000 can do 3). On the Z68 boards, the VGA is hard-wired to the DVI port I believe, to give you an analog version of the DVI output. This won't help you much ... I think you need to use a combination of HDMI+DVI or HDMI+VGA. To validate that DVI==VGA...

The detection of HD2000 512MB is cosmetic. You can add the proper description by re-patching the DSDT and add "model", Buffer () { "Intel HD Graphics 3000" }, Do your USB 3.0 port work at all ? Mine do, but I don't have USB 3.0 devices plugged in, only USB 2.0 devices (my Wifi is a USB...