Search results

I was following the USB patching instructions and ran across some weirdness with USB3. I couldn't actually get the USB3 device to be recognized when I plugged it in during that step. I skipped over it and moved on, but I feel like there's still some weirdness going on. I'm going to redo the...

I've been trying this out today and was wondering if I might have some other inherent issues with how my laptop is setup. I have 2 DVI monitors with an HDMI adapter and another with a DP adapter. I recently converted my setup to use WhateverGreen and using the previous graphics inject methods my...

Was curious if you've done any updates to this build @goldenegg? I've been working on an MSI GL72M 7RDX and was able to use some of your insight on fixing sleep to get mine to actually go to sleep, which is something I've been trying to achieve for quite awhile now. My build uses WhateverGreen...

Can someone confirm I did this right? I just combined the values into Sublime Text for my own easy reading. Pulled EDID output value from EDID.hex Opened DisplayProductID-XXXX in PlistEdit Pro and got second value I copied the EDID output and replaced 95 with B5 and removed the 9C at the end I...

Can someone confirm I did this right? I just combined the values into Sublime Text for my own easy reading. Pulled EDID output value from EDID.hex Opened DisplayProductID-XXXX in PlistEdit Pro and got second value I copied the EDID output and replaced 95 with B5 and removed the 9C at the end I...

Deleted

Did you run into any issues with a "service only ran for 0 seconds" error when doing the install? I've been trying to get High Sierra installed on a GL72M-7RDX and it hung up in the middle of the install. The error seems to be tied to the dual graphics cards and I can't seem to disable the...

That was the issue. I thought I had a 1600x900 monitor, but my resolution was only 1366x768. Went through the patching again, installed SSDT-IGPU.aml and everything seems to be working.

I've had this same graphics issue pop up again after doing the rest of the installation of patches. Inject EDID isn't doing anything anymore to fix it, so now I'm again at a brick wall. I installed the SSDT-6x60.aml package, tried to reboot and I'm back to the vertical lines I posted initially...

I was able to finally boot into the installer by changing from Inject Intel to Inject EDID. Now onto the post install tweaks. Thanks for the help!

Just took a look and didn't specifically find anything glaring I missed. I downloaded the config for HD3000 1600x900 (which I thought I had, but appears I didn't have the same config there) and made the droptable change to the config. Tried booting again and got the same lines. Is there...

My laptop is an HP Probook 6460b with a 2.5ghz i5-2520M Intel processor. It has 12gb of ram, Intel HD 3000 graphics with 1600x900 resolution. I bought a wifi card to swap out the one that came with it and it worked without a hitch previously. It also has no built-in webcam for whatever reason. I...

Are there any graphic flags or anything I can try with an HD 3000 setup? I'm at a loss for how to get around this.

I have an HP Probook 6460b that had previously been running Yosemite that had been installed using Chameleon. I decided it was finally time to upgrade to a Clover install. I've followed the Probook instructions to try and install and I keep getting these vertical lines when it gets past the...

Is it just me or does this step feel like it's glossing over a bunch of stuff that was specifically outlined in the previous Yosemite Clover install instructions? Are you supposed to just click the customize button, yet leave all the settings in the default setup? Was there not a difference in...

I got stuck at this point in the tutorial as well. Has something changed in 10.10.3 that made these instructions inaccurate after the update?

Any takers on this one? I've had no luck with getting sleep to work at all.

I just recently switched to Clover and have been trying to get sleep to work with my board. It's probably been since Lion that I've actually had machine that properly wakes with a keyboard or mouse click, so I'm hoping there is some solution out there. Upon installing Yosemite I think I'm worse...

I was wondering if you had any luck with waking from sleep with this install? I have the same board but have a GT 640 as a graphics card. I followed your install and I'm having no luck with the computer waking up. I read somewhere else that using the power management kext might keep it from...

I recently updated my main drive from Mavericks to Yosemite and it's been giving me boot issues pretty much ever since. When I try a straight boot I get a still waiting for root device error. I have a GA-Z68A-D3H-B3 motherboard with the F11 bios. The only way I can reliably boot into my install...