Search results

Went through my notes & found it. Thanks for posting it as well On my reboot, it correctly picked up the right ssd & booted into it after 5 secs, so I am not sure what the heck was going on earlier with the extra items (which now do not show up) & the really odd bios behavior earlier.

...and back..... Went back into BIOS & verified it was F6i Double checked all settings & disabled secure boot in bios & removed RX 580 DP into z390 for now so it will just use the igfx & booted back into clone HDD which was on 12.6.3 Rebooted back & picked the other "Macintosh HD" & here we are...

I was on F6g 1. Took a backup of the BIOS to the USB 2 Flashed to F6i. Screen went black, presumably it finished 3. Hard power off & on & back in bios - cfg lock disabled - internal wifi disabled - XMP set back to 1 - gfx set to igfx ( that's the config I am using on my OC EFI)...

Thank you both @jiffyslot and @CaseySJ Downloaded F9i from here (page #2914) Looks like CFG_LOCK is enabled by default. I'm reading Dortania's guide. If there is an easier way in the Bios itself, please let me know. Internet is spotty this morning (probably due to outages) so will follow up on...

Need some BIOS upgrade advice here. Running Z390 + core i9 + RX580 (iMac 2019) Bios F6 OS: Monterey 12.7 OC: 0.83 Fenvi Card for Wifi/BT Everything is working & stable & the plan is to go to Ventura or Sonoma in Dec. Update BIOS now & OC to 0.9.5 next week & stick to Monterey 12.7 for a...

I am on 0.8.3 as well and on Monterey 12.7 Unless, I'm mistaken, you should be able to update to oc 0.9.5 first & stay on Big Sur or go to Monterey & also switch to Intel Wifi & keep it there for a few weeks as a stability test & then do a direct upgrade to Sonoma

@Ponkass I am running a z390 + Amd Rx580 with iMac 19,1 in SMBIOS If you take the DisplayPort out from the 580 & put that into the z390 DP in, then you can run a single usb-c/tb cable to your monitor & you will have iGPU & rx580 working correctly with full video hardware acceleration The only...

I am currently on Z390 / i7 2019 iMac /amd rx580/ iGfx TB cable to monitor (Thanks for the help on this Casey, many pages ago) Monterey: 12.7 OC: 0.83 Bios: F6 So my upgrade plan/path is OC: 0.83 -> 0.92 or 0.95 Monterey 12.7 Test stability for a week or so Next steps Bios: F6 -> F9g/F9j...

If that doesn't resolve the issue, then remove wall plate and make sure wires are correctly connected to 110v outlet :mrgreen: .....had that happen years ago when old pc would not power on, no matter what I tried. The neutral wire had come loose from the wall socket quick connect.....

Yep, works fine..... check refresh rate on monitor. Hit BIOS & set initial GPU to AMD & it will work fine & I use that when I need to get into the BIOS or see the BIOS or do an upgrade & then I use DisplayPort cable from 580 to monitor (LG Ergo 32") Currently, I have RX 580 out to DP in on...

If you enable iGFX, then you may be using the USB-c/TB out in which case the BIOS will not show at the screen This also assumes that you have a video card in there where you have DP Out from video card -> DP IN on motherboard To see the BIOS at all times even with iGFX, use the DP out from...

1. Make sure you are not using some XMP (extreme memory profile) that is causing some instability in the bios 2. Keep a phone handy with the camera pointed at the screen & record a video (for yourself) when the verbose boot sequence starts. That will make it easier for you to go through it to...

cmd + v when you boot so it starts in verbose mode. Then come back here & post where it stops in the boot sequence.

Mapping. There is a 15 port USB limit so in the default config, USB over TB is disabled, I don't use the USB DAC ports (Yellow ones) so Casey helped me by adjusting the mapping and disabling those & enabling USB over TB So now I have TB/USB_C out to monitor & can use the USB 3 ports on my...

Thanks for the heads up. I'm sticking with 0.8.3 at the moment as everything works & will update to 0.9.2 later when I go to Ventura I guess I will update to 12.6.6 with OC 0.8.3 for now. Edit: Updated to 12.6.6 with OC 0.8.3 and just logged back in. Everything seems to be working so far.

Anyone here on Monterey 12.6.5 + OC 0.83, updated to 12.6.6 (keeping same OC-0.83) ? Checking to see if anyone has run into issues on our config (z390/rx580)

This may or may not be related Are you using any XMP profiles or funky setting for memory ? (overclocking etc) or have mismatched memory modules ? In which case use the safest defauits for memory & see if you still have any issues I have 64gb in mine (z390) & had some extreme XMP setting &...

If the next macOS version on Jun 5th still supports x86 then we are good for another year & could probably update to that, unless it was worse than Ventura (I am still on 12.6.5)

I am on Monterey 12.6.5 with OC-0.8.3 with everything working. Audio/WiFi/Bluetooth/Continuity/Apple Watch unlock etc etc So if I follow your process above, then these steps should work 1. Update OC 0.8.3 -> OC 0.9.2 2. Reboot into Monterey 12.6.5 & verify everything works as above 3. Download...

AMD RX580 -> DP out -> DP in on z390 motherboard USB-C/TB out -> USB-C in on LG Ergo 32" UN880-B (awesome monitor) Bios set to iGFX, about screen shows AMD Radeon RX580 8GB I have used this setup with Mojave & upgraded to Mavericks (or the other way around) & now upgraded in place to...